Advanced SearchSearch Tips
Measurements of Defects after Machining CFRP Holes Using High Speed Line Scan
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Measurements of Defects after Machining CFRP Holes Using High Speed Line Scan
Kim, Teaggyum; Kyung, Daesu; Son, Unchul; Park, Sun-Young;
  PDF(new window)
Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images () without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both , with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.
Carbon fiber-reinforced plastics;Line scan image;Inspection of CFRP hole defects;Laser scan confocal method;Inner hole inspection;
 Cited by
Zhang, H. J., Chen, W. Y., Chen, D. C., and Zhang, L. C., "Assessment of the Exit Defects in Carbon Fiber-Reinforced Plastic Plates Caused by Drilling," Key Engineering Materials, Vol. 196, pp. 43-52, 2001. crossref(new window)

Faraz, A., Biermann, D., and Weinert, K., "Cutting Edge Rounding: An Innovative Tool wear Criterion in Drilling CFRP Composite Laminates," International Journal of Machine Tools &Manufacture, Vol. 49, No. 15, pp. 1185-1196, 2009. crossref(new window)

Lachaud, F., Piquet, R., Collmbet, F., and Surcin, L., "Drilling of Composite Structure," Composite Structures, Vol. 52, No. 3-4, pp. 511-516, 2001. crossref(new window)

Shyha, I., Soo, S. L., Aspinwall, D., and Bradley, S., "Effect of Laminate Configuration and Feed Rate on Cutting Performance When Drilling Holes in Carbon Fiber Reinforced Plastic Composites," Journal of Materials Processing Technology, Vol. 210, No. 8, pp. 1023-1034, 2010. crossref(new window)

Durao, L. M. P., Goncalves, D. J. S., Tavares, J. M. R. S., Albuquerque, V. H. C., Vieira, A. A., et al., "Drilling Tool Geometry Evaluation for Reinforced Composite Laminates," Composite Structures, Vol. 92, No. 7, pp. 1545-1550, 2010. crossref(new window)

Feito, N., Diaz-Alvarez, A., Cantero, J. L., and Miguelez, H., "Experimental Analysis of Special Tool Geometries When Drilling Woven and Multidirectional CFRPs," Journal of Reinforced Plastics and Composites, Vol. 35, No. 1, pp. 33-55, 2016. crossref(new window)

Lin, P. C., Sun, P.-C., and Fainman, Y., "Single-Shot Depth-Section Imaging through Chromatic Slit-Scan Confocal Microscopy," Applied Optics, Vol. 37, No. 28, pp. 6764-6770, 1998. crossref(new window)

Im, K-B., Han, S., Park, H., Kim D., and Kim, B-M., "Simple High-Speed Confocal Line-Scanning Microscope," Optics Express, Vol. 13, No. 13, pp. 5151-5156, 2005. crossref(new window)

Sheppard, C. J. R. and Mao, X. Q., "Confocal Microscopes with Slit Apertures," Journal of Modem Optics, Vol. 35, No. 7, pp. 1169-1185, 1988. crossref(new window)

Botcherby, E. J., Booth, M. J., and Wilson, T., "Real-Time Slit Scanning Microscopy in the Meridional Plane," Optics Letters, Vol. 34, No. 10, pp. 1504-1506, 2005.