Mechanism and Characteristics of the Surface Flashover on the Laminated Solid Dielectric in N2/O2 Mixture Gas

Title & Authors
Mechanism and Characteristics of the Surface Flashover on the Laminated Solid Dielectric in N2/O2 Mixture Gas
Lim, Dong-Young; Choi, Eun-Hyeok; Choi, Sang-Tae; Bae, Sungwoo; Lee, Kwang-Sik; Choi, Byoung-Ju;

Abstract
This paper presents the surface flashover mechanism of a laminated solid dielectric and describes the surface flashover characteristics with the inherent capacitance of the laminated solid dielectric in a $\small{N_2/O_2}$ mixture gas (8:2) under an quasi uniform field. It was found that the electron emission at a cathode and the high-local electric field region around an anode were important factors to reasonably describe the surface flashover mechanism. The surface flashover voltage by the mechanism decreased with the inherent capacitance increase of the laminated solid dielectric. In addition to the surface flashover mechanism and its characteristics, the surface flashover voltage equations as a function of the inherent capacitance were derived by considering a gas pressure used in future eco-friendly GIS and the factors influencing the surface flashover.
Keywords
Insulation;Inherent Capacitance;Insulation Technique;Solid Dielectric;Surface Flashover;
Language
Korean
Cited by
References
1.
J. E. Foster, B. Sommers and S. Gucker, "Towards understanding Plasma Formation in Liquid Water via Single Bubble Studies", Jpn. J. Appl. Phys., Vol. 54, No.01AF05, pp. 1-8, 2015.

2.
H. J. Song, B. J. Chun and K. S. Lee, "Improvement of Ozone Yield by a Multi-Discharge Type Ozonizer Using Superposition of Silent Discharge Plasma", J. Korean Phys. Soc., Vol. 44, No. 5, pp. 1182-1188, 2004.

3.
T. Rokunohe, Y. Yagihashi, K. Aoyagi, T. Oomori and F. Endo, "Development of \$SF_6\$-Free 72.5 kV GIS", IEEE Trans. Power Deliv., Vol. 22, No. 3, pp. 1869-1876, 2007.

4.
K. W. Wargner, "The Physical Nature of the Electrical Breakdown of Solid Dielectrics", AIEE Trans. Vol. 41, pp. 288-299, 1922.

5.
K. H. Stark and C. G. Garton, "Electric Strength of Irradiated Polythene", Nature, Vol. 176, pp. 1225-1226, 1955.

6.
H. Frohlich, "On the Theory of Dielectric Breakdown in Solids", Proc. Roy. Soc., Vol. A-188, pp. 521-532, 1947.

7.
D. W. Watson, "Dielectric Breakdown of Perspex Electrets in Nonuniform Fields" IEEE Trans. Elec. Insul., Vol. EI-8, No. 1, pp. 6-9, 1973.

8.
P. H. H. Fischer and K. W. Nissen, "The Short-Time Electric Breakdown Behavior of Polyethylene", IEEE Trans. Elec. Insul., Vol. EI-11, No. 2, pp. 37-40, 1976.

9.
C. R. Li and T. S. Sudarshan, "Dielectric Surface Preflashover Processes in Vacuum", J. Appl. Phys., Vol. 76, No. 6, pp. 3313-3320, 1994.

10.
H. C. Miller, "Surface Flashover of Insulators", IEEE Trans. Electr. Insul., Vol. 24, No. 5, pp. 765-786, 1989.

11.
N. C. Jaitly and T. S. Sudarshan," DC Surface Flashover Mechanism along Solids in Vacuum based on a Collision-Ionization Model", J. Appl. Phys., Vol. 64, No. 7, pp. 3411-3418, 1988.

12.
J. R. Harris et al., "Multilayer High-Gradient Insulators", IEEE Trans. Dielectr. Electr. Insul., Vol. 14, No. 4, pp. 796-802, 2010.

13.
K. Kato, M. Kurimoto, H. Shumiya, H. Adachi, S. Sakuma and H. Okubo, "Application of Functionally Graded Material for Solid Insulator in Gaseous Insulation System", IEEE Trans. Dielectr. Electr. Insul., Vol. 13, No. 1, pp. 362-372, 2006.

14.
M. Kurimoto, K. Kato, M. Hanai, Y. Hoshina, M. Takei and H. Okubo, "Application of Functionally Graded Material for Reducing Electric Field on Electrode and Spacer Interface", IEEE Trans. Dielectr. Electr. Insul. Vol. 17, No. 1, pp. 256-263, 2010.

15.
G. J. Min, S. Bae, B. C. Kang and W. Z. Park, "Surface Discharge Characteristics Study on the Laminated Solid Insulator in Quasi-Uniform Electric Field with Dry Air", J. Electr. Eng. Technol., Vol. 10, No. 2, pp. 742-748, 2015.

16.
D. Y. Lim, H. R. Park, E. H. Choi and K. S. Lee, "Surface Discharge Characteristics of laminated Solid Insulator in \$N_2\$/ \$O_2\$ Mixture gas", J. KIIEE Annual Spring Conf., pp. 288-289, 2012.

17.
D. Y. Lim, H. R. Park, S. G. Park, S. T. Choi, W. Z. Park and K. S. Lee, "The Study to Improve Surface dielectric Strength of laminated Solid Dielectric in \$N_2\$/ \$O_2\$ Mixture gas", J. KIIEE Autumn Annual Conf., pp. 207-208, 2012.

18.
IEEJ (Ohm-sha), "Discharge Handbook", IEEJ Discharge Handbook Publication committee, Vol. 1, pp. 316-319, 1998.

19.
E. H. Choi, B. H. Koo, L. K. Kim and K. S. Lee, "Assess of Breakdown Characteristics about Environmentally Friendly Gases", Journal of KIIEE, Vol. 23, No. 5, pp. 96-100, 2009.

20.
H. Naruse, H. Saito, M. Sakaki, O. Yamamoto, "Flashover Mechanisms of Bridged Vacuum Gaps Based on Cathode Electric Field Measurement", IEEE Trans. Dielectr. Electr. Insul., Vol. 22, No. 1, pp. 597-603, 2015.

21.
K. Kato, H. Kato, T. Ishida and H. Okubo, "Influence of Surface Charges on Impulse Flashover Characteristics of Alumina Dielectrics in Vacuum", IEEE Trans. Dielectr. Electr. Insul., Vol. 16, No. 6, pp. 1710-1716, 2009.

22.
H. C. Miller and R. J. Ney, "Gases Released by Surface Flashover of Insulators", J. Appl. Phys. Vol. 63, No. 3, pp. 668-673, 1988.