JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Optimized Motion Planning Considering the Lifetime for Bimanual Robotic Assembly
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Optimized Motion Planning Considering the Lifetime for Bimanual Robotic Assembly
Hwang, Myun Joong;
 
 Abstract
The objective of this research is to verify the quantitative efficiency of a bimanual robotic task. Bimanual robots can realize dexterous and complicated motions using two cooperating arms. However, its motion planning and control method are not simple for implementing flexible tasks such as assembly. In this paper, the proposed motion planning method is used to find an optimal solution satisfying a designed cost function and constraints with regard to the kinematics and redundancy of the bimanual robot. The simulation results show that the lifetime of the manipulator can be changed by the proposed cost function consisting of angular velocity and angular acceleration of each joint in the same assembly task.
 Keywords
bimanual robot;motion planning;kinematics;optimization;
 Language
Korean
 Cited by
 References
1.
B. S. Kim, Y. L. Kim, J. B. Song, and S. W. Son, "Impedancecontrol based peg-in-hole assembly with a 6 DOF manipulator," Trans. Korean Soc. Mech. Eng. A (in Korean), vol. 35, no. 4, pp. 347-352, 2011. crossref(new window)

2.
D. H. Kim, Y. S. Choi, R. J. Yan, L. P. Luo, J. Y. Lee, and C. S. Han, "Efficient path planning of a high DOF multibody robotic system using adaptive RRT," Journal of Institute of Control, Robotics, and Systems (in Korean), vol. 21, no. 3, pp. 257-264, 2015. crossref(new window)

3.
S. B. Moon and S. Ahmad, "Time-optimal trajectories for cooperative multi-manipulator systems," IEEE Trans. on Systems, Man, and Cybernetics-Part B: Cybernetics, vol. 27, no. 2, pp. 343-353, 1997. crossref(new window)

4.
J. K. Ahn and S. Jung, "Position-based force control Application of a mobile robot with two arms," Journal of Institute of Control, Robotics, and Systems (in Korean), vol. 19, no. 4, pp. 315-321, 2013. crossref(new window)

5.
C. Lewis and A. Maciejewski, "Trajectory generation for cooperating robots," Proc. of the IEEE Int. Conf. on Systems Engineering, pp. 300-303, 1990.

6.
W. Owen, E. Croft, and B. Benhabib, "Acceleration and torque redistribution for a dual-manipulator system," IEEE Trans. on Robotics, vol. 21, no. 6, pp. 1226-1230, 2005. crossref(new window)

7.
D. H. Kim, N. H. Shin, and M. H. Oh, "Development of anthropomorphic robot hand and arm by tendon-tubes," Journal of Institute of Control, Robotics, and Systems (in Korean), vol. 20, no. 9, pp. 964-970, 2014. crossref(new window)

8.
J. Lee, P. H. Chang, and D. G. Gweon, "A cost function inspired by human arms movement for a bimanual robotic machining," Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 5431-5436, 2012.

9.
M. J. Hwang, S. Y. Chung, and D. Y. Lee, "Motion planning of bimanual robot using bimanual task compatibility," Journal of Institute of Control, Robotics, and Systems (in Korean), vol. 14, no. 7, pp. 656-662, 2008. crossref(new window)

10.
S. Lee, "Dual redundant arm configuration optimization with task-oriented dual arm manipulability," IEEE Trans. on Robotics and Automation, vol. 5, no. 1, pp. 78-97, 1989. crossref(new window)

11.
T. Yoshikawa, "Manipulability of robotic mechanisms," International Journal of Robotics Research, vol. 4, no. 2, pp. 3-9, 1985.

12.
Y. Bouffard-Vercelli, P. Dauchez, and X. Delebarre, "Forcecontrolled assembly with a two-arm robot: how and where to perform it within the workspace," Proc. of the IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 1977-1984, 1993.

13.
Harmonic Drive AG, Engineering DATA SHD-2SH Units. [Online]. Available: http://harmonicdrive.de/produkte/media/category/2014_12_ED_1019647_SHD_2SH.pdf.

14.
R. C. Juvinall and K. M. Marchek, Fundamentals of Machine Component Design, 2nd Edition, John Wiley & Sons, New York, pp. 532-541, 1991.

15.
M. J. Hwang, S. Y. Chung, and D. Y. Lee, "Assembly approach for bimanual robot," Proc. of the IEEE/ASME Int. Conf. on Advanced Intelligent Mechatronics, pp. 1482-1487, 2005.

16.
A. D. Belegundu and T. R. Chandrupatla, Optimization Concepts and Application in Engineering, Prentice Hall, pp. 183-188, 1999.

17.
M. J. Hwang, D. Y. Lee, and S. Y. Chung, "Motion planning of bimanual robot using adaptive model of assembly," IEICE Trans. on Fundamentals, vol. E91-A, no. 12, pp. 3749-3756, 2008. crossref(new window)