Publisher : Institute of Control, Robotics and Systems
DOI : 10.5302/J.ICROS.2015.15.0083
Title & Authors
FPGA based System for Pinhole Detection in Cold Rolled Steel Ha, Sung-Kil; Lee, Jung Eun; Moon, Woo Sung; Baek, Kwang Ryul;
The quality of steel plate products is determined by the number of defects and the process problems are estimated by shapes of defects. Therefore pinholes defects of cold rolled steel have to be controlled. In order to improve productivity and quality of products, within each production process, the product is inspected by an adequate inspection system individually in the lines of steelworks. Among a number of inspection systems, we focus on the pinholes detection system. In this paper, we propose an embedded system using FPGA which can detect pinholes defects. The proposed system is smaller and more flexible than a traditional system based on expensive frame grabbers and PC. In order to detect consecutive defects, FPGAs acquire two dimensional image and process the image in real time by using correlation of lines. The proposed pinholes detection algorithm decreases arithmetic operations of image processing and also we designed the hardware to shorten the data path between logics due to decreasing propagation delay. The experimental results show that the proposed embedded system detects the reliable number of pinholes in real time.
FPGA;line scan camera;defect detection;pin-hole;
Petr Dosek, "Detection of spots on materials using the FPGA circuit," Applied Electronics, 2006.
G.-H. Baek, "Implementation of an image processing system for PDP pattern inspection," Department of Electronics Engineering (in Korean), Graduate School, Pusan National University, Feb. 2005.
DALSA, Specifications of the Camera Link Interfact Standard for Digital Camera and Frame Grabbers, DALSA Inc., Oct. 2000.
e2v, AVIIVA EM2/EM4 Line Scan Monochrome Camera User Manual, e2v Inc., Nov. 2011.
AVIIVA SM2 CL Camera Link Line Scan Camera, e2v semiconductors SAS 2009.
D. M. Tsai and C. P. Lin, "Fast defect detection in textured surfaces using ID gabor filters," International journal of Advanced Manufacturing Technology, vol. 20, 2003.
K. Nurdan, "FPGA-based data acquisition system for a Compton camera," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 510, no. 1-2, pp. 122-125, Sep. 2003.
Y. J. Jang and J. S. Lee, "Development of a 3D shape reconstruction system for defects on a hot steel surface," Journal of Institute of Control, Robotics and Systems, vol. 21, no. 5, pp. 459-464, May 2015.
S.-M. Ryu, "Development of debugging tool for LEON3-based embedded systems," Journal of Institute of Control, Robotics and Systems, vol. 20, no. 4, pp. 474-479, Apr. 2014.