JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Study on Analysis of Transfer Torque and Improvement of Transfer Torque in Non-Contact Permanent Magnet Gear
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Study on Analysis of Transfer Torque and Improvement of Transfer Torque in Non-Contact Permanent Magnet Gear
Park, Gyu-Sang; Kim, Chan-Ho; Kim, Yong-Jae;
  PDF(new window)
 Abstract
The non-contact permanent magnet gear has advantages of high efficiency and improved reliability. It has other advantages of no mechanical friction loss, very little noise and vibration, and no need for lubricant. With these advantages, the non-contact permanent magnet gear that solves the physical contact problem of the mechanical gear has drawn attention. Due to this unique non-contact characteristic, the non-contact permanent magnet gear which is capable of non-contact torque transmission has replaced mechanical gear. The mechanical gears which is in many fields of the modern industry, is used mostly for power transmitting mechanical devices. However, it also has the problem of a low torque density, which requires improvement. In this paper, a novel pole piece shape is proposed in order to improve the problem of low torque density of the non-contact permanent magnet gear. The experiment data required for predicting the relationships among them are obtained using finiteelement Operating method based on two-dimensional (2-D) numerical analysis. Therefore, this paper derived an optimal model for thenon-contact permanent magnet gear with the novel pole piece using the Box-Behnken design, and the validity of the optimal design of the proposed pole piece shape through variance analysis and regression analysis demonstrated. In this paper, we performed the thransfer torque analysis in order to improve the torque density and power density, we have performed on optimal design of proposed pole piece shape using box-behnken.
 Keywords
Non-contact magnet gear;transfer torque;gear ratio;response surface operating methodology;box-behnken design;torque density;
 Language
Korean
 Cited by
 References
1.
K. Atallah, S.D.Calverley, and D.Howe, "High-performance magnetic gear", J. Magn. Magn. Mater., 272-276(1), pp. E1727-1729, May, 2004. crossref(new window)

2.
K. Atallah and D. Howe, "A novel high-performance magnetic gear", IEEE Trans. Magn., 37(4), pp. 2844-2846, July. 2001. crossref(new window)

3.
Gil-Sun Choi, Sung-Chin Hahn, "Multiobjective Optimal Double-Layer PM Rotor Structure Design of IPMSM by Response Surface Method and Finite Element Method", Journal of the Korean Institute of IIIuminating and Electrical Installation Engineers, 24(6), pp 123-130, June, 2010.

4.
L. Jian, G. Xu, J. Song, H. Xue ,D. Zhao and J. Liang, "Optimum Design for Improving Modulating-Effect of Coaxial Magnetic Gear using Response Surface methodology and Genetic Algorithm", Progress in Electromagnetics Research, 116, pp 297-312, 2011 crossref(new window)

5.
Y.H. Im, S.M. Jang, "Optimal Design of Interior Permanent Magnet Synchronous Machines Consideration of Magnet BH Characteristic with Different Rotor Type using Response Surface Methodology", The Transactions of the Korean Institute of Electrical Engineers, 62(8), August, 2013

6.
L. Jian, G. Xu, Y. Gong, J.Song, J. Liang, and M. Chang, "Electromagnetic design and analysis of a novel magnetic-gear-integrated wind power generator using time-stepping finite element method", Progress In Electromagnetics Research, 113, pp. 351-367, February 2011.

7.
L.Jian and K.T.Chau, "A Coaxial magnetic gear with Halbach permanent magnet arrays", IEEE Trans. Energy Conv., 25(2), pp. 319-328, Jun. 2010. crossref(new window)