A Study on the Determination of the Removal Times of Form in Concrete Using Fly Ash Cement

Title & Authors
A Study on the Determination of the Removal Times of Form in Concrete Using Fly Ash Cement
Shin Byung-Cheol; Han Min-Cehol;

Abstract
In this paper, removal time of side form from concrete using OPC(ordinary Portland cement) and FAC(fly ash cement) are proposed by appling logistic model, which evaluates the strength development of concrete with maturity. W/B, types of cement and curing temperatures are adapted as test parameters. The estimation of strength development by logistic model has a good agreement between calculated values and measured ones. As for the removal times of form works suggested in this paper, as W/8 increases, curing temperature decreases and fly ash is used, removal time of side form is prolonged. Removal time of form from concrete using OPC suggested in this paper is shorter $\small{2.5\~3.5}$ days than those of KASS-5 (Korean Architectural Standard Specifications-5) in the range of over $\small{20^{\circ}C}$. And in the range of $\small{10\~20^{\circ}C}$ removal time of form is shorter than that of KASS-5 by as much as $\small{4\~4.5}$ days. The use of FAC results in an increase in removal time of form compared to that of OPC by about 1 day.
Keywords
Fly ash;Removal times of form;Strength development;Maturity;Concrete;
Language
Korean
Cited by
References
1.
대한건축학회, 2003, 건축공사 표준시방서, 239-­241

2.
한국콘크리트학회, 2003, 콘크리트 표준시방서, 124-126

3.
한천구, 한민철, 2004, 고강도콘크리트 시공시 측면 거푸집 탈형시기의 결정, 한국콘크리트학회 논문집, 16(3), 327-334

4.
Carino, N. J., 1984, Maturity method; theory and application, Journal of Cement Concrete and Aggregate, ASTM., 1-15

5.
Saul, A. G. A., 1951, Principles underlying the steam curing of concrete at atmospheric pres sure, Magazine of Concrete Research, 2(6), 127-140

6.