Advanced SearchSearch Tips
Comparison of Surface Characteristics and Adsorption Rate of Benzene Vapor According to Modifications of Activated Carbon
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Comparison of Surface Characteristics and Adsorption Rate of Benzene Vapor According to Modifications of Activated Carbon
Lee, Song-Woo; Kam, Sang-Kyu; Lee, Min-Gyu;
  PDF(new window)
The surface properties and adsorption rates of activated carbon modified with acid and base were compared. The distribution ratio of C and C-H on the surface of activated carbon were decreased by modification with acid and base, but the distribution ratio of C-O, C=O, and O=C-O were increased. Base modification damaged the surface of activated carbon more than acid modification, it caused the effect of 6 percent increments of surface area. Adsorption rate model was more suitable to second order equation than first order equation. Adsorption rate was controlled by adsorption in pore better than in surface.
Activated carbon;Surface chemistry;Adsorption rate;Modification;
 Cited by
활성탄의 물리적 특성과 표면 특성에 따른 수중의 methylene blue의 흡착특성,감상규;유해나;이민규;

Journal of Environmental Science International, 2014. vol.23. 11, pp.1821-1826 crossref(new window)
Lee S. W., Moon J. C., Lee C. H., Ryu D. C., Choi D. H., Ryu B. S., Song S. K., 2001, Analysis of pore characteristics between commercial activated carbons and domestic anthracite-based activated carbon, J. Korean Soc. Environ. Eng., 23(7), 1211-1218

Kim T. J., Seo S. G., Kim S. C., 2005, Removal of odor-containing sulfur compound, methyl mercaptan using modified activated carbon with various acidic chemicals, J. Korean Soc. Atmosph. Environ., 21(2), 155-160

Lee S. W., Lee M. G., Park S. B., 2008, Comparison of surface characteristics and adsorption characteristics of activated carbons changed by acid and base modification, J. Environ. Sci., 17(5), 565-571 crossref(new window)

Lee S. W., Bae S. K, Kwon J. H., Na Y. S., An C. D., Yoon Y. S., Song S. K., 2005, Correlations between pore structure of activated carbon and adsorption characteristics of acetone vapor, J. Korean Soc. Environ. Engrs, 27(6), 620-625

Lee S. W., Kwon J. H., Kang J. H., Na Y. S., An C. D., Yoon Y. S., Song S. K., 2006, Adsorption characteristics of toluene vapor according to pore size distribution of activated carbon, J. Environ. Sci., 15(7), 695-699 crossref(new window)

Lee M. G., Lee S. W., Lee S. H., 2006, Comparison of vapor adsorption characteristics of acetone and toluene based on polarity in activated carbon fixed-bed reactor, Korean J. Chem. Eng., 23(5), 773-778 crossref(new window)

Lee S. W., Kam S. K., Lee M. G., 2007, Comparison of breakthrough characteristics for binary vapors composed of acetone and toluene based on adsorption intensity in activated carbon fixed-bed reactor, J. Ind. Eng. Chem., 13(6), 911-916

Kim H. W., Lee S. W., Lee M. G., Cheon J. K., 2007, Variations of equilibrium adsorption capacities according to type and mixing fraction of binary mixed gas on activated carbon fixed-bed, J. Environ. Sci., 16(10), 1197-1202 crossref(new window)

Cheung T. T. P., 1984, X-ray photoemission of polynuclear aromatic carbon, J. Appl. Phys., 55(5), 1388-1393 crossref(new window)

Moreno-Castilla C., Lopez-Ramon M.V., Carrasco-Marin F., 2000, Changes in surface chemistry of activated carbons by wet oxidation, Carbon, 38, 1995-2001 crossref(new window)

Darmstadt H., Roy C., Kaliaguine S., 1994, ESCA Characterization of commercial carbon blacks and of carbon blacks from vacuum pyrolysis of used tires, Carbon, 32(8), 1399-1406 crossref(new window)

Desimoni E., Casella G. I., Salvi A. M., 1992a, XPS/XAES study of carbon fibers during thermal annealing under UHV conditions, Carbon, 30(4), 521-526 crossref(new window)

Desimoni E., Casella G. I., Salvi A. M., Cataldi T. R. I., Morone A., 1992b, XPS Investigation of ultrahigh- vacuum storage effects on carbon fiber surfaces, Carbon, 30(4), 527-531 crossref(new window)

Zielke U., Huttinger K. J., Hoffman W. P., 1996, Surface-oxidized carbon fibers: I. Surface structure and chemistry, Carbon, 34(8), 983-998 crossref(new window)

Tutem E., Apak R., Unal G. F., 1998, Adsorptive removal of chloro-phenols from water by bituminous shale, Water Res., 32, 2315-2324 crossref(new window)

Lagergren S., 1898, About the theory of so-called adsorption of soluble substances, Kung Sven Veten Hand, 24, 1-39

Ho Y. S., McKay G., 1999, Pseudo-second order model for sorption processes. Process Biochem., 34, 451-465 crossref(new window)

Ho Y. S., McKay G., 2000, The kinetics of sorption of divalent metal ions onto sphagnum moss peat, Water Res., 34, 735-742 crossref(new window)

McKay G,, 1983, Adsorption of dye stuffs from aqueous solution using activated carbon. III. Intraparticle diffusion processes, J. Chem. Technol. Biotechnol., 33A, 196-204

Moon H., Lee W. K., 1983, Intraparticle diffusion in liquid-phase adsorption of phenol with activated carbon in finite batch adsorber. J. Colloid Interface Sci., 96, 162-170 crossref(new window)

Weber W. J., Morris C. J., 1982, In Proceedings of the 1st International Conference on Water Pollution Research, Pergamon: New York, 231pp

Crank J., 1975, The Mathmatics of Diffusion, Clarendon Press, Oxford, London, 349pp

Weber W. T. Jr., 1972, Physicochemical Processes for Water Quality Control, Wiley, New York