JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of Organoclay and Blends on the Abrasion Resistance and Mechanical Properties of Poly(styrene-block-butadiene-block-styrene)
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effect of Organoclay and Blends on the Abrasion Resistance and Mechanical Properties of Poly(styrene-block-butadiene-block-styrene)
Kim, Ji-Hoo; Kim, Gue-Hyun;
  PDF(new window)
 Abstract
To investigate organoclay, high styrene resin masterbatch (HSR), high impact polystyrene (HIPS), and polystyrene (PS) as reinforcing materials for the improvement of the abrasion resistance of poly(styrene-block-butadiene-block-styrene) (SBS), SBS/organoclay nanocomposites, SBS/HSR, SBS/HIPS, and SBS/PS blends were prepared. The effect of organoclay and blends on the abrasion resistance and mechanical properties of SBS was investigated. Even though intercalations of organoclay are observed for SBS/Cloisite 20A nanocomposites and not for SBS/Cloisite 30B composites, the abrasion resistance of SBS/Cloisite 20A nanocomposites is worse than that of SBS/Cloisite 30B composites. When SBS was blended with HSR, HIPS and PS, the abrasion resistance of the blends increases with increasing of HSR, HIPS and PS content from 0 to 20 wt%.
 Keywords
Abrasion resistance;Organoclay;SBS;
 Language
English
 Cited by
 References
1.
Ahmadi, S. J., Huang, Y., Li, W., 2005, Fabrication and physical properties of EPDM-organoclay nanocomposites, Compos. Sci. Technol., 65, 1069-1076. crossref(new window)

2.
Alexandre, M., Dubois, P., 2000, Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials, Mater. Sci. Eng., 28, 1-63. crossref(new window)

3.
Ataeefard, M., Moradian, S., 2011, Polypropylene/ Organoclay Nanocomposites: Effects of Clay Content on Properties, Polym-Plast. Technol. Eng., 50, 732-739. crossref(new window)

4.
Briscoe, B., 1981, Wear of polymers: an essay on fundamental aspects, Tribol. Int., 14, 231-243. crossref(new window)

5.
Chen, Z., Feng, R., 2009, Preparation and characterization of poly (styrene-b-butadiene-bstyrene)/ montmorillonite nanocomposites, Polym. Compos., 30, 281-287. crossref(new window)

6.
Chu, L. H., Chiu, W. Y., Chen, C. H., Tseng, H. C., 1999, A Modified Rheological Model of Viscosities for BR-SBS Blends, J. Appl. Polym. Sci., 71, 39-46. crossref(new window)

7.
Giannelis, E. P., 1996, Polymer layered silicate nanocomposites, Adv. Mater, 8, 29-35. crossref(new window)

8.
Han, C. D., Baek, D. M., Kim, J., Kimishima, K., Hashimoto, T., 1992, Viscoelastic behavior, phase equilibria, and microdomain morphology in mixtures of a block copolymer and a homopolymer, Macromolecules, 25, 3052-3067. crossref(new window)

9.
Laus, M., Francescangeli, O., Sandrolini, F. J., 1997, New hybrid nanocomposites based on an organophilic clay and poly(styrene-b-butadiene) copolymers, Mater. Res., 12, 3134-3139. crossref(new window)

10.
LeBaron, P. C., Wang, Z., Pinnavaia, T. J., 1999, Polymerlayered silicate nanocomposites: an overview, 1999, Appl. Clay Sci., 15, 11-29. crossref(new window)

11.
Liao, M., Zhu, J., Xu, H., Li, Y., Shan, W., 2004, Preparation and Structure and Mechanical Properties of Poly(Styrene-b-butadiene)/Clay Nanocomposites, J. Appl. Polym. Sci., 92, 3430-3434. crossref(new window)

12.
Maniar, K. K., 2004, Polymeric Nanocomposites: A Review, Polym-Plast. Technol. Eng., 43, 427-443. crossref(new window)

13.
Mukhopadhyay, K., Tripathy, D. K., De, S. K., 1991, Wear, tear and tensile failure of silica-filled ethylene vinyl acetate rubber, Wear, 152, 111-125.

14.
Pappa, G., Boukouvalas, N., Giannaris, C., Ntaras, N., Zografos, V., Magoulas, K., Lygeros, A., Tassios, D., 2001, The selective dissolution/precipitation technique for polymer recycling: a pilot unit application, Resources Conserv. Recycling, 34, 33-44. crossref(new window)

15.
Ray, S. S., Okamoto, M., 2003, Polymer/layered silicate nanocomposites: a review from preparation to processing, Prog. Polym. Sci., 28, 1539-1641. crossref(new window)

16.
Roe, R. J., Jin, W. C., 1984, Phase equilibria and transition in mixtures of a homopolymer and a block copolymer. 2. Phase diagram, Macromolecules, 17, 189-194. crossref(new window)

17.
Shafiee, M., Ramazani, S. A. A., Danaei, M., 2010, Investigation of the Gas Barrier Properties of PP/Clay Nanocomposite Films with EVA as a Compatibiliser Prepared by the Melt Intercalation Method, Polym-Plast. Technol. Eng., 49, 991-995. crossref(new window)

18.
Yang, A. C. M., Ayala, J. E., Scott, J. C., 1991, Abrasive wear in filled elastomers, J. Mater. Sci., 26, 5823-5837. crossref(new window)

19.
Zhang, S. W., 1981, Mechanisms of rubber abrasion in unsteady state, Rubber Chem. Technol., 57, 755-768.