Advanced SearchSearch Tips
Application of Modified Sericite for Dyeing Wastewater Treatment
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Application of Modified Sericite for Dyeing Wastewater Treatment
Choi, Hee-Jeong;
  PDF(new window)
The aim of this study was to investigate the nutrient removal using Mg-Sericite flocculant in the dyeing wastewater. Mg-Sericite flocculant was removed successfully > 98% of the Color, SS. COD and BOD in the dyeing wastewater at the following optimal Mg-Sericite dosage: 100 mg/L for Colour and SS, 300 mg/L for BOD and COD. The removal of TN and TP was obtained 92.00% with 50 mg/L and 87.80% with 100 mg/L Mg-Sericite dosage, respectively. These results was indicated that the amount of 0.79~1.31, 0.22~0.37, 0.5 and 0.16 mg/L Mg-Sericite was necessary for 1 mg/L removal BOD, COD, TN and TP, respectively. The biopolymer, Mg-Sericite, can be a promising flocculants due to its high efficiency and low dose requirements. In addition, Mg-Sericite does not contaminate treated wastewater, which can be recycled to reduce not only the cost and the demand for water but also the extra operational costs for reusing wastewater. This flocculation method is helpful to lower the wastewater treatment cost.
Dyeing wastewater;Flocculation;Mg-Sericite;Nutrient removal;Wastewater treatment;
 Cited by
난각막을 이용한 양이온성 염료 제거,최희정;

한국수처리학회지, 2016. vol.24. 2, pp.39-51 crossref(new window)
Abidi, N., Errais, E., Duplay, J., Berez, A., Jrad, A., Schafer, G., Ghazi, M., Semhi, K., Trabelsi-Ayadi, M., 2015, Treatment of dye-containing effluent by natural clay, J. Cleaner Prod., 86, 432-440. crossref(new window)

Alhamad, A. L., Ismail, S., Bhatia, S., 2005, Optimization of coagulation-flocculation process for plam oil mill effluent using response surface methodology, Environ. Sci. Technol., 39, 2828-2834. crossref(new window)

Amuda, O. S., Alade, A., 2006, Coagulation/flocculation process in the treatment of abattoir wastewater, Desalination, 196, 22-31. crossref(new window)

APHA, 2012, Standard methods for the examination of water and waste water, 22th ed. American Public Health Association Publ., Wachington, D.C.

Blanco, J., Torrades, F., Moron, M., Brouta-Agnesa, M., Garcia-Montano, J., 2014, Photo-Fenton and sequencing batch reactor coupled to photo-Fenton processes for textile wastewater reclamation: Feasibility of reuse in dyeing processes, Chemical Eng. J., 240, 469-475. crossref(new window)

Chen, T., Gao, B., Yue, Q., 2010, Effect of dosing method and pH on color removal performance and floc aggregation of polyferric chloride-polyamine dualcoagulant in synthetic dyeing wastewater treatment, Colloids and Surfaces A: Physicochem. Eng. Aspects, 355(1-3), 121-129. crossref(new window)

Choi, H. J., 2015, Effect of Mg-Sericite flocculant for treatment of brewery wastewater, Appl. Clay Sci., 115, 145-149. crossref(new window)

Guo, X., Yao, Y., Yin, G., Kang, Y., Luo, Y., Zhuo, L., 2008, Preparation of decolorizing ceramsites for printing and dyeing wastewater with acid and base treated clay, Appl. Clay Sci., 40(1-4), 20-26. crossref(new window)

Hadjltaief, H. B., Costa, P. D., Beaunier, P., Galvez, M. E., Zina, M. B., 2014, Fe-clay-plate as a heterogeneous catalyst in photo-Fenton oxidation of phenol as probe molecule for water treatment, Appl. Clay Sci., 91-92, 46-54. crossref(new window)

Ismail, I. M., Fawzy, A. S., Abdel-Monem, N. M., Mahmoud, Mohamed A., El-Halwany, M. A., 2012, Combined coagulation flocculation pre treatment unit for municipal wastewater, J. Adv. Res., 3, 331-336. crossref(new window)

Kyzas, G. Z., Kostoglou, M., Vassiliou, A. A., Lazaridis, N. K., 2011, Treatment of real effluents from dyeing reactor: Experimental and modeling approach by adsorption onto chitosan, Chemical Eng. J., 168(2), 577-585. crossref(new window)

Lee, S. M., Tiwari, D., 2012, Organo and inorgano-organo-modified clays in the remediation of aqueous solutions: An overview, Appl. Clay Sci., 59-60, 84-102. crossref(new window)

Lee, Y. C., Park, W. K., Yang, J. W., 2011, Removal of anionic metals by amino-organoclay for water treat-ment, J. Hazard. Mat., 190, 652-658. crossref(new window)

Li, Z., Chang, P. H., Jiang, W. T., Jean, J. S., Hong, H., 2011, Mechanism of methylene blue removal from water by swelling clays, Chemical Eng. J., 168(3), 1193-1200. crossref(new window)

Lin, P. J., Yang, M. C., Li, Y. L., Chen, J. H., 2015, Prevention of surfactant wetting with agarose hydrogel layer for direct contact membrane distillation used in dyeing wastewater treatment, J. Membrane Sci., 475, 511-520. crossref(new window)

Lotito, A. M., Fratino, U., Mancini, A., Bergna, G., Iaconi, C. D., 2012, Effective aerobic granular sludge treatment of a real dyeing textile wastewater, International Biodeterioration Biodegradation, 69, 62-68. crossref(new window)

Lu, K., Zhang, X. L., Zhao, Y. L., Wu, Z. L., 2010, Removal of color from textile dyeing wastewater by foam separation, J. Hazard. Mat., 182(1-3), 928-932. crossref(new window)

Ministry of Environment, 2013, Environmental Statistics Yearbook, 26.

Moghaddam, S. S., Alavi Moghaddam, M. R., Arami, M., 2010, Coagulation/flocculation process for dye removal using sludge from water treatment plant: Optimization through response surface methodology, J. Hazard. Mat., 175, 651-657. crossref(new window)

Rahman, A., Urabe, T., Kishimoto, N., 2013, Color removal of reactive production dyes by clay adsorbents, Procedia Environ. Sci., 17, 270-278. crossref(new window)

Rodrigues, C. S. D., Madeira, L. M., Boaventura, R. A. R., 2014, Synthetic textile dyeing wastewater treatment by integration of advanced oxidation and biological processes Performance analysis with costs reduction, J. Environ. Chem. Eng., 2(2), 1027-1039. crossref(new window)

Rong, H., Gao, B., Li, R., Wang, Y., Yue, Q., Li, Q., 2014, Effect of dose methods of a synthetic organic polymer and PFC on floc properties in dyeing wastewater coagulation process, Chemical Eng. J., 243, 169-175. crossref(new window)

Sathian, S., Rajasimman, M., Rathnasabapathy, C. S., Karthikeyan, C., 2014, Performance evaluation of SBR for the treatment of dyeing wastewater by simultaneous biological and adsorption processes, J. Water Process Eng., 4, 82-90. crossref(new window)

Soares, P. A., Batalha, M., Selene, M. A., Souza, G. U., Boaventura, R. A. R., Vilar, V. J. P., 2015, Enhancement of a solar photo-Fenton reaction with ferricorganic ligands for the treatment of acrylic-textile dyeing wastewater, J. Environ. Manage., 152, 120-131. crossref(new window)

Yang, Q., Wang, J., Wang, H., Chen, X., Ren, S., Li, X., Xu, Y., Zhang, H., Li, X., 2012, Evolution of the microbial community in a full-scale printing and dyeing wastewater treatment system, Bioresour. Technol., 117, 155-163. crossref(new window)

Yang, Z., Liu, X., Gao, B., Zhao, S., Wang, Y., Yue, Q., Li, Q., 2013, Flocculation kinetics and floc charac-teristics of dye wastewater by polyferric chloride-poly-epichlorohydrin-dimethylamine composite flocculant, Separation and Purification Technol., 118, 583-590. crossref(new window)

Ying, F., Gao, B. Y., Zhang, Y. F., Zhang, X. Y., Shi, N., 2011, Organic modifier of poly-silicic-ferric coagulant: Characterization, treatment of dyeing wastewater and floc change during coagulation, Desalination, 277 (1-3), 67-73. crossref(new window)

Wang, J. P., Chen, Y. Z., Wang, Y., Yuan, S. J., Yu, H. Q., 2011, Optimization of the coagulation-flocculation process for pulp mill wastewater treatment using a combination of uniform design and response surface methodology, Water Res., 45 (17), 5633-5640. crossref(new window)

Wang, Y., Gao, B., Yue, Q., Wang, Y., 2011, Effect of viscosity, basicity and organic content of composite flocculant on the decolorization performance and mechanism for reactive dyeing wastewater, J. Environ. Sci., 23(10), 1626-1633. crossref(new window)

Zhou, K., Zhang, Q., Wang, B., Liu, J., Wen, P., Gui, Z., Hu, Y., 2014, The integrated utilization of typical clays in removal of organic dyes and polymer nanocomposites, J. Cleaner Prod., 81, 281-289. crossref(new window)