JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Experimental study on Re number effects on aerodynamic characteristics of 2D square prisms with corner modifications
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Wind and Structures
  • Volume 22, Issue 5,  2016, pp.573-594
  • Publisher : Techno-Press
  • DOI : 10.12989/was.2016.22.5.573
 Title & Authors
Experimental study on Re number effects on aerodynamic characteristics of 2D square prisms with corner modifications
Wang, Xinrong; Gu, Ming;
 Abstract
Simultaneous pressure measurements on 2D square prisms with various corner modifications were performed in uniform flow with low turbulence level, and the testing Reynolds numbers varied from to . Experimental models were a square prism, three chamfered-corner square prisms (B/D
 Keywords
wind tunnel test;2D square prism;corner modification;aerodynamic characteristic;Reynolds number effect;
 Language
English
 Cited by
1.
Shear effects on flows past a square cylinder with rounded corners at Re=2.2×10 4, Journal of Wind Engineering and Industrial Aerodynamics, 2018, 174, 119  crossref(new windwow)
 References
1.
Bearman, P.W. and Obasaju, E.D. (1982), "An experimental study of pressure fluctuations on fixed and oscillating square-section cylinders", J. Fluid Mech., 119, 297-321. crossref(new window)

2.
Bosch, G. and Rodi, W. (1998), "Simulation of vortex shedding past a square cylinder with different turbulence models", Int. J. Numer. Meth. Fl., 28(4), 601-616. crossref(new window)

3.
Cao, S., Zhou, Q. and Zhou, Z. (2014), "Velocity shear flow over rectangular cylinders with different side ratios", Comput. Fluids., 96, 35-46. crossref(new window)

4.
Carassale, L., Freda, A. and Marre-Brunenghi, M. (2013), "Effects of free-stream turbulence and corner shape on the galloping instability of square cylinders", J. Wind Eng. Ind. Aerod., 123, 274-280. crossref(new window)

5.
Carassale, L., Freda, A. and Marre-Brunenghi, M. (2014), "Experimental investigation on the aerodynamic behavior of square cylinders with rounded corners", J. Fluid. Struct., 44, 195-204. crossref(new window)

6.
Choi, C.K. and Kwon, D.K. (2003), "Effects of corner cuts and angles of attack on the Strouhal number of rectangular cylinders", Wind Struct., 6(2), 127-140. crossref(new window)

7.
Gu, M. and Quan, Y. (2004), "Across-wind loads of typical tall buildings", J. Wind Eng. Ind. Aerod., 92(13), 1147-1165. crossref(new window)

8.
Hayashida, H. and Iwasa, Y. (1990), "Aerodynamic shape effects of tall building for vortex induced Vibration", J. Wind Eng. Ind. Aerod., 33(1), 237-242. crossref(new window)

9.
Huang, R.F., Lin, B.H. and Yen, S.C. (2010), "Time-averaged topological flow patterns and their influence on vortex shedding of a square cylinder in crossflow at incidence", J. Fluid. Struct., 26(3), 406-429. crossref(new window)

10.
Huang, R.F. and Lin, B.H. (2011), "Effects of flow patterns on aerodynamic forces of a square cylinder at incidence", J. Mech., 27(3), 347-355. crossref(new window)

11.
Igarashi, T. (1984), "Characteristics of the flow around a square prism", Bull. JSME, 27(231), 1858-1865. crossref(new window)

12.
Knisely, C.W. (1990), "Strouhal numbers of rectangular cylinders at incidence: a review and new data", J. Fluid. Struct., 4(4), 371-393. crossref(new window)

13.
Koutmos, P. and Mavridis, C. (1997), "A computational investigation of unsteady separated flows", Int. J. Heat Fluid Fl, 18(3), 297-306. crossref(new window)

14.
Kwok, K.C.S. (1988), "Effect of building shape on wind-induced response of tall building", J. Wind Eng. Ind. Aerod., 28(1), 381-390. crossref(new window)

15.
Lee, B.E. (1975), "The effect of turbulence on the surface pressure field of a square prism", J. Fluid Mech., 69(2), 263-282. crossref(new window)

16.
Liang, S.G., Liu, S.C., Li, Q.S., Zhang, L.L. and Gu, M. (2002), "Mathematical model of across wind dynamic loads on rectangular tall buildings", J. Wind Eng. Ind. Aerod., 90(12), 1757-1770. crossref(new window)

17.
Lyn, D.A., Einav, S., Rodi, W. and Park, J.H. (1995), "A laser-Doppler velocimetry study of ensemble-averaged characteristics of the turbulent near wake of a square cylinder", J. Fluid Mech., 304, 285-319. crossref(new window)

18.
Miyashita, K., Katagiri, J., Nakamura, O., Ohkuma, T., Tamura, Y., Itoh, M. and Mimachi, T. (1993), "Wind-induced response of high-rise buildings Effects of corner cuts or openings in square buildings", J. Wind Eng. Ind. Aerod., 50, 319-328. crossref(new window)

19.
Murakami, S. and Mochida, A. (1995), "On turbulent vortex shedding flow past 2D square cylinder predicted by CFD", J. Wind Eng. Ind. Aerod., 54, 191-211.

20.
Nakamura, Y. and Ohya, Y. (1984), "The effects of turbulence on the mean flow past two-dimensional rectangular cylinders", J. Fluid Mech., 149, 255-273. crossref(new window)

21.
Nakamura, Y. and Ozono, S. (1987), "The effects of turbulence on a separated and reattaching flow", J. Fluid Mech.,178, 477-490. crossref(new window)

22.
Naudascher, E., Weske, J.R. and Fey, B. (1981), "Exploratory study on damping of galloping vibrations", J. Wind Eng. Ind. Aerod., 8(1), 211-222. crossref(new window)

23.
Nishimura, A. and Taniike, Y. (2000), "Fluctuating wind forces of a stationary two dim. square prism" (in Japanese), Proceedings of the 16th National Symposium on Wind Engineering, Tokyo, Japan.

24.
Norberg, C. (1993), "Flow around rectangular cylinders: pressure forces and wake frequencies", J. Wind Eng. Ind. Aerod., 49(1), 187-196. crossref(new window)

25.
Okajima, A. (1982), "Strouhal numbers of rectangular cylinders", J. Fluid Mech., 123, 379-398. crossref(new window)

26.
Okajima, A. (1990), "Numerical simulation of flow around rectangular cylinders", J. Wind Eng. Ind. Aerod., 33(1), 171-180. crossref(new window)

27.
Oka, S. and Ishihara, T. (2009), "Numerical study of aerodynamic characteristics of a square prism in a uniform flo", J. Wind Eng. Ind. Aerod., 97(11), 548-559. crossref(new window)

28.
Ono, Y. and Tamura, T. (2001), "Numerical study for turbulent effect on aerodynamics of a square cylinder", Proceedings of the 5th Asia-Pacific Conference on Wind Engineering, Kyoto, Japan, October.

29.
Otsuki, Y., Fujii, K., Washizu, K.T. and Ohya, A. (1978), "Wind tunnel experiments on aerodynamic forces and pressure distributions of rectangular cylinders in a uniform flow"(in Japanese), Proceedings of the Fifth Symposium on Wind Effects on Structures, Tokyo, Japan.

30.
Pocha, J.J. (1971), "On unsteady flow past cylinders of square cross-section", Ph.D. Dissertation, University of London, London.

31.
Schewe, G. (1983),"On the force fluctuations acting on a circular cylinder in crossflow from subcritical up to transcritical Reynolds numbers", J. Fluid Mech., 133, 265-285. crossref(new window)

32.
Schewe, G. (1986),"Sensitivity of transition phenomena to small perturbations in flow round a circular cylinder", J. Fluid Mech.,172, 33-46. crossref(new window)

33.
Shimada, K. and Ishihara, T. (2002), "Application of a modified k-${\varepsilon}$ model to the prediction of aerodynamic characteristics of rectangular cross-section cylinders", J. Fluid. Struct., 16(4), 465-485. crossref(new window)

34.
Sohankar, A., Davidson, L. and Norberg, C. (2000), "Large eddy simulation of flow past a square cylinder: Comparison of different subgrid scale models", J. Fluid. Eng.-T. ASME, 122(1), 39-47. crossref(new window)

35.
Tamura, T. and Kuwahara, K. (1990), "Numerical study of aerodynamic behavior of a square cylinder", J. Wind Eng. Ind. Aerod., 33(1), 161-170. crossref(new window)

36.
Tamura, T. and Miyagi, T. (1999), "The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes", J. Wind Eng. Ind. Aerod., 83(1), 135-145. crossref(new window)

37.
Tamura, T., Miyagi, T. and Kitagishi, T. (1998), "Numerical prediction of unsteady pressures on a square cylinder with various corner shapes", J. Wind Eng. Ind. Aerod., 74, 531-542.

38.
Tamura, T., Ohta, I. and Kuwahara, K. (1990), "On the reliability of two-dimensional simulation for unsteady flows around a cylinder-type structure", J. Wind Eng. Ind. Aerod., 35, 275-298. crossref(new window)

39.
Taylor, I. and Vezza, M. (1999), "Prediction of unsteady flow around square and rectangular section cylinders using a discrete vortex method", J. Wind Eng. Ind. Aerod., 82(1), 247-269. crossref(new window)

40.
Vickery, B.J. (1966), "Fluctuating lift and drag on a long cylinder of square cross-section in a smooth and in a turbulent stream", J. Fluid Mech., 25(3), 481-494. crossref(new window)

41.
Wang, J.M., Cheng, C.M. and Tens, P.T. (2003), "Design wind loads on tall buildings: a wind tunnel data based expert system approach", Proceedings of 11th International Conference on Wind Engineering. Lubbock, TX, USA.

42.
Wang, X. and Gu, M. (2015),"Experimental investigation of Reynolds number effects on 2D rectangular prisms with various side ratios and rounded corners", Wind Struct., 21(2), 183-202. crossref(new window)

43.
Yen, S.C. and Yang, C.W. (2011), "Flow patterns and vortex shedding behavior behind a square cylinder", J. Wind Eng. Ind. Aerod., 99(8), 868-878. crossref(new window)

44.
Yu, D.H. and Kareem, A. (1996), "Two-dimensional simulation of flow around rectangular prisms", J. Wind Eng. Ind. Aerod., 62(2), 131-161. crossref(new window)

45.
Yu, D.H. and Kareem, A. (1997), "Numerical simulation of flow around rectangular prism", J. Wind Eng. Ind. Aerod., 67, 195-208.