Advanced SearchSearch Tips
Ride comfort of the bridge-traffic-wind coupled system considering bridge surface deterioration
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Wind and Structures
  • Volume 23, Issue 1,  2016, pp.19-43
  • Publisher : Techno-Press
  • DOI : 10.12989/was.2016.23.1.019
 Title & Authors
Ride comfort of the bridge-traffic-wind coupled system considering bridge surface deterioration
Liu, Yang; Yin, Xinfeng; Deng, Lu; Cai, C.S.;
In the present study, a new methodology is presented to study the ride comfort and bridge responses of a long-span bridge-traffic-wind coupled vibration system considering stochastic characteristics of traffic flow and bridge surface progressive deterioration. A three-dimensional vehicle model with 24 degrees-of-freedoms (DOFs) including a three-dimensional non-linear suspension seat model and the longitudinal vibration of the vehicle is firstly presented to study the ride comfort. An improved cellular automaton (CA) model considering the influence of the next-nearest neighbor vehicles and a progressive deterioration model for bridge surface roughness are firstly introduced. Based on the equivalent dynamic vehicle model approach, the bridge-traffic-wind coupled equations are established by combining the equations of motion of both the bridge and vehicles in traffic using the displacement relationship and interaction force relationship at the patch contact. The numerical simulations show that the proposed method can simulate rationally the ride comfort and bridge responses of the bridge-traffic-wind coupled system; and the vertical, lateral, and longitudinal vibrations of the driver seat model can affect significantly the driver`s comfort, as expected.
bridge;traffic;vibration;ride comfort;bridge surface;
 Cited by
Baker, C. J. (1991), "Ground vehicles in high cross winds. Part I: Unsteady aerodynamic forces", J. Fluid. Struct., 5, 91-111. crossref(new window)

Bouazara, M., Richard, M.J. and Rakheja, S. (2006), "Safety and comfort analysis of a 3-D vehicle model with optimal non-linear active seat suspension", J. Terramech., 43, 97-118. crossref(new window)

Cai, C.S., Hu, J., Chen, S., Han, Y., Zhang, W. and Kong, X. (2015), "A coupled wind-vehicle-bridge system and its applications: a review", Wind Struct., 20(2), 117-142. crossref(new window)

Chen, S.R. and Cai, C.S. (2004), "Accident assessment of vehicles on long-span bridges in windy environments", J. Wind Eng. Ind. Aerod., 92(12), 991-1024. crossref(new window)

Chen, Y.B. and Feng, M.Q. (2006), "Modeling of traffic excitation for system identification of bridge structures", Comput-Aided Civ. Infrastruct Eng , 21, 57-66.

Chen, S.R. and Cai, C.S. (2007), "Equivalent wheel load approach for slender cable-stayed bridge fatigue assessment under traffic and wind: feasibility study", J. Bridge Eng., 12(6), 755-764. crossref(new window)

Chen, S.R. and Wu, J. (2010), "Dynamic performance simulation of long-span bridge under combined loads of stochastic traffic and wind", J. Bridge Eng., 15(3), 219-230. crossref(new window)

Chen, S.R. and Wu, J. (2011), "Modeling stochastic live load for long-span bridge based on microscopic traffic flow simulation", Comput. Struct., 89,813-824. crossref(new window)

Clough, R.W. and Penzien, J. (1993), "Dynamics of structures" [M], New York, McGraw-Hill Inc.

Deng, L. and Cai, C.S. (2010), "Bridge model updating using response surface method and genetic algorithm ", J. Bridge Eng., 5(15), 553-564.

Fujii, S. and Yoshimoto, K. (1975), "An analysis of the lateral hunting motion of a two-axle railway wagon by digital simulation (1st report, the outline of the mathematical model)", Bull. JSME, 18(122), 813-818. crossref(new window)

Fujii, S., Yoshimoto, K. and Kobayashi, F. (1975), "An analysis of the lateral hunting motion of a two-axle railway wagon by digital simulation (2nd report, the outline of the mathematical model)", Bull. JSME, 18(125), 1246-1251. crossref(new window)

Gim, G. and Nikravesh, P.E. (1990), "Analytical model of pneumatic types for vehicle dynamic simulations Part 1. Pure slips", Int. J. Vehicle Des., 11(5), 589-618.

Guo, W.H. and Xu, Y.L. (2001), "Fully computerized approach to study cable-stayed bridge vehicle interaction", J. Sound Vib., 248(4), 745-761. crossref(new window)

Han, W., Ma, L., Cai, C.S., Chen, S. and Wu, J. (2015), "Nonlinear dynamic performance of long-span cable-stayed bridge under traffic and wind", Wind Struct., 20(2), 249-274. crossref(new window)

ISO. (1995), "Mechanical vibration-road surface profiles-reporting of measured data", ISO 8068: (E), Geneva.

ISO. (1997), "Mechanical vibration and shock - Evaluation of human exposure to whole body vibration-Part1: General requirements", ISO 2631-1:1997E, Geneva.

Park J.H., Huynh T.C., Lee K.S. and Kim J.T. (2016), "Wind and traffic-induced variation of dynamic characteristics of a cable-stayed bridge-benchmark study", Smart Struct. Syst., 17(3), 491-522. crossref(new window)

Kong, X., Gao, Z. and Li, K. (2006), "A two lane celluar automata model with influence of next nearest neighbor vehicle", Commun. Theor. Phys., 45(4), 657-662. crossref(new window)

Nagel, K. and Schreckenberg, M. (1992), "A cellular automaton model for freeway traffic", J. Phys. (France), 2(12), 2221-2229.

Zhang, W. and Cai, C.S. (2012), "Fatigue reliability assessment for existing bridges considering vehicle speed and road surface conditions", J. Bridge Eng., 17(3), 443-453. crossref(new window)

Xu, Y.L. and Guo, W.H. (2004), "Effects of bridge motion and crosswind on ride comfort of road vehicles", J. Wind Eng. Ind. Aerod., 92, 641-662. crossref(new window)

Yin, X.F., Fang, Z. and Cai, C.S. (2011), "Lateral vibration of high-pier bridges under moving vehicular loads", J. Bridge Eng., 16(3), 400-412. crossref(new window)

Yu, L. and Chan, T.H. (2007), "Recent research on identification of moving loads on bridges", J. Sound Vib., 305(1-2), 3-21. crossref(new window)