Advanced SearchSearch Tips
Modified electrical conductivity test method for evaluation concrete permeability
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Computers and Concrete
  • Volume 16, Issue 6,  2015, pp.865-880
  • Publisher : Techno-Press
  • DOI : 10.12989/cac.2015.16.6.865
 Title & Authors
Modified electrical conductivity test method for evaluation concrete permeability
Pilvar, Amirreza; Ramezanianpour, Ali Akbar; Rajaie, Hosein;
Standard test method for bulk electrical conductivity (ASTM C1760) provides a rapid indication of the concrete`s resistance to the penetration of chloride ions by diffusion. In this paper a new approach for assessing the bulk electrical conductivity of saturated specimens of hardened concrete is presented. The test involves saturating concrete specimens with a 5 M NaCl solution before measuring the conductivity of the samples. By saturating specimens with a highly conductive solution, they showed virtually the same pore solution conductivity. Different concrete samples yield different conductivity primarily due to differences in their pore structure. The feasibility of the method has been demonstrated by testing different concrete mixtures consisting ordinary and blended cement of silica fume (SF) and calcined perlite powder (CPP). Two standard test methods of RCPT (ASTM C1202) and Bulk Conductivity (ASTM C1760) were also applied to all of the samples. The results show that for concretes containing SF and CPP, the proposed method is less sensitive towards the variations in the pore solution conductivity in comparison with RCPT and Bulk Conductivity tests. It seems that this method is suitable for the assessment of the performance and durability of different concretes containing supplementary cementitious materials.
concrete;chloride permeability;conductivity;pore solution;
 Cited by
Andrade, C. (1993), "Calculation of chloride diffusion coefficients in concrete from ionic migration measurements", Cement Concrete Res., 23(3), 724-742. crossref(new window)

Andrade, C., Prieto, M., Tanner, P., Tavares, F. and Andrea, R. (2013), "Testing and modelling chloride penetration into concrete", Constr. Build. Mater., 39, 9-18. crossref(new window)

ASTM C1543 (2010), Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding.

ASTM C1556 (2011), Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion.

ASTM C1202 (2012a), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, West Conshohocken Pennsylvania.

ASTM C1760 (2012b), Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete.

Atkinson, A. and Nickerson, A.K. (1984), "The diffusion of ions through water-saturated cement", J. Mater. Sci., 19, 3068-3078. crossref(new window)

Bagheri, A.R. and Zanganeh, H. (2012), "Comparison of rapid tests for evaluation of chloride resistance of concretes with supplementary cementitious materials", J. Mater. Civ. Eng., 24(9), 1175-1182. crossref(new window)

Bard, A.J. and Faulkner, L.R. (1980), Electrochemical Methods: Fundamentals And Applications, Wiley, New York.

Buckley, L.J., Carter, M.A., Wilson, M.A. and Scantlebury, J.D. (2007), "Methods of obtaining pore solution from cement pastes and mortars for chloride analysis", Cement Concrete Res., 37(11), 1544-1550. crossref(new window)

Calleja, J. (1952), "Effect of current frequency on measurement of electrical resistance of cement pastes", ACI J. Proceedings.

Dhir, R.K., Jones, M.R., Ahmed, H.E.H. and Seneviratne, A.M.G. (1990), "Rapid estimation of chloride diffusion coefficient in concrete", Mag. Concrete Res., 42(152), 177-185. crossref(new window)

Garboczi, E.J. and Bentz, D.P. (1992), "Computer simulation of the diffusivity of cement-based materials", J. Mater. Sci., 27(8), 2083-2092. crossref(new window)

Gulikers, J. (2005), "Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement", Mater. Corros., 56(6), 393-403. crossref(new window)

Hooton, R.D. and Karkar, E. (2012), "Specifying fluid penetration resistance of concrete", International congress on durability of concrete.

Jiang, L., Song, Z., Yang, H., Pu, Q. and Zhu, Q. (2013), "Modeling the chloride concentration profile in migration test based on general Poisson Nernst Planck equations and pore structure hypothesis", Constr. Build. Mater., 40, 596-603. crossref(new window)

Julio-Betancourt, G. and Hooton, R. (2004), "Study of the Joule effect on rapid chloride permeability values and evaluation of related electrical properties of concretes", Cement Concrete Res., 34(6), 1007-1015. crossref(new window)

Kessler, R.J., Powers, R.G., Vivas, E., Paredes, M.A. and Virmani, Y.P. (2008), "Surface resistivity as an indicator of concrete chloride penetration resistance", Concrete Bridge Conference, St. Louis, Missouri.

NT Build 355 (1995), Concrete, mortar and cement based repair materials: chloride diffusion coefficient from migration cell experiments, Nordtest Standards Institution.

Page, C.L. and Vennesland, O. (1983), "Pore solution composition and chloride binding capacity of silicafume cement pastes", Mater. Struct., 16(1), 19-25.

Pigeon, M., Garnier, F., Pleau, R. and Aitcin, P.C. (1993), "Influence of Drying on the Chloride Ion Permeability of HPC", Concrete Int., 15(2).

Pilvar, A., Ramezanianpour, A.A. and Rajaie, H. (2015), "New method development for evaluation concrete chloride ion permeability", Constr. Build. Mater., 101(1), 10007.

Poulsen, E. and Mejlbro, L. (2010), Diffusion Of Chloride In Concrete: Theory And Application, CRC Press.

Ramezanianpour, A., Motahari Karein, S.M., Vosoughi, P., Pilvar, A., Isapour, S. and Moodi, F. (2014), "Effects of calcined perlite powder as a SCM on the strength and permeability of concrete", Constr. Build. Mater., 66, 222-228. crossref(new window)

Ramezanianpour, A.A. (2014), Cement Replacement Materials, Springer.

Ramezanianpour, A.A., Pilvar, A., Mahdikhani, M. and Moodi, F. (2011), "Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength", Constr. Build. Mater., 25(5), 2472-2479. crossref(new window)

Rupnow, T.D. and Icenogle, P. (2011), "Evaluation of surface resistivity measurements as an alternative to the rapid chloride permeability test for quality assurance and acceptance", Louisiana Transportation Research Center.

Safehian, M. and Ramezanianpour, A.A. (2013), "Assessment of service life models for determination of chloride penetration into silica fume concrete in the severe marine environmental condition", Constr. Build. Mater., 48, 287-294. crossref(new window)

Safehian, M. and Ramezanianpour, A.A. (2015), "Prediction of RC structure service life from field long term chloride diffusion", Comput. Concrete, 15(4), 589-606. crossref(new window)

Shimizu, Y. (1928), "An electrical method for measuring the setting time of portland cement", Mill Section Concrete, 32(5), 111-113.

Snyder, K. (2001), "The relationship between the formation factor and the diffusion coefficient of porous materials saturated with concentrated electrolytes: theoretical and experimental considerations", Concrete Sci. Eng., 3(12), 216-224.

Snyder, K., Feng, X., Keen, B. and Mason, T. (2003), "Estimating the electrical conductivity of cement paste pore solutions from OH-, K+ and Na+ concentrations", Cement Concrete Res., 33(6), 793-798. crossref(new window)

Snyder, K., Ferraris, C., Martys, N. and Garboczi, E. (2000), "Using impedance spectroscopy to assess the viability of the rapid chloride test for determining concrete conductivity", J. Res.Natl Inst. Stand. Tech., 105(4), 497-510. crossref(new window)

Spiesz, P. and Brouwers, H.J.H. (2013), "The apparent and effective chloride migration coefficients obtained in migration tests", Cement Concrete Res., 48, 116-127. crossref(new window)

Spragg, R., Villani, C., Snyder, K.A., Bentz, D.P., Bullard, J.W. and Weiss, J. (2013), "Electrical resistivity measurements in cementitious systems: observations of factors that influence the measurements", J. Transport. Res. Board, 2342, 90-98. crossref(new window)

Stanish, K., Hooton, R.D. and Thomas, M.D.A. (2004), "A novel method for describing chloride ion transport due to an electrical gradient in concrete: Part 1. Theoretical description", Cement Concrete Res., 34(1), 43-49. crossref(new window)

Streicher, P.E. and Alexander, M.G. (1995), "A chloride conduction test for concrete", Cement Concrete Res., 25(6), 1284-1294. crossref(new window)

Sun, G.W., Sun, W., Zhang, Y.S. and Liu, Z.Y. (2011), "Relationship between chloride diffusivity and pore structure of hardened cement paste", J. Zhejiang Univ. Sci., 12(5), 360-367. crossref(new window)

Tang, L. (2005), "Guideline for practical use of methods for testing the resistance of concrete to chloride ingress", EU-Project Chlortest, Project No: G6RD-CT-2002, 855.

Tang, L. and Lars-Olof, N. (1993), "Rapid determination of the chloride diffusivity in concrete by applying an electric field", ACI Mater. J., 89(1), 49-53.

Tang, L., Nilsson, L.O. and Basheer, P.M. (2011), Resistance of concrete to chloride ingress: Testing and modelling, CRC Press.

Taylor, H.F. (1987), "A method for predicting alkazi ion concentrations in cement pore solutions", Adv. Cement Res., 1(1), 5-17. crossref(new window)

Wang, J. C. (2015), "Testing of the permeability of concrete box beam with ion transport method in service", Comput. Concrete, 15(3), 461-471. crossref(new window)

Whiting, D.A. and Nagi, M.A. (2003), "Electrical resistivity of concrete-a literature review", R&D Serial.

Whittington, H., McCarter, J. and Forde, M. (1981), "The conduction of electricity through concrete", Mag. Concrete Res., 33(114), 48-60. crossref(new window)

Xia, J. and Li, L.Y. (2013), "Numerical simulation of ionic transport in cement paste under the action of externally applied electric field", Constr. Build. Mater., 39, 51-59. crossref(new window)

Yogendran, V., Langan, B., Haque, M. and Ward, M. (1987), "Silica fume in high-strength concrete", ACI Mater. J., 84(2), 124-129.

Yoon, I.S., Hong, S. and Kang, T.H. (2015), "Influence of curing condition and carbonation on electrical resistivity of concrete", Comput. Concrete, 15(6), 973-987. crossref(new window)

Zofia, S. and Adam, Z. (2013), "Theoretical model and experimental tests on chloride diffusion and migration processes in concrete", Procedia Eng., 57, 1121-1130. crossref(new window)