JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Properties of pervious concrete containing high-calcium fly ash
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Computers and Concrete
  • Volume 17, Issue 3,  2016, pp.337-351
  • Publisher : Techno-Press
  • DOI : 10.12989/cac.2016.17.3.337
 Title & Authors
Properties of pervious concrete containing high-calcium fly ash
Sata, V.; Ngohpok, C.; Chindaprasirt, P.;
 Abstract
This paper presents the properties of pervious concrete containing high-calcium fly ash. The water to binder ratios of 0.19, 0.22, and 0.25, designed void ratios of 15, 20, and 25%, and fly ash replacements of 10, 20, and 30% were used. The results showed that the use of fly ash as partial replacement of Portland cement enhanced the mixing of paste resulting in a uniform mix and reduced amount of superplasticizer used in the mixture. The compressive strength and flexural strength of pervious concrete were slightly reduced with an increase in fly ash replacement level, while the abrasion resistance increased due mainly to the pozzolanic and filler effects. The compressive strength and flexural strengths at 28 days were still higher than 85% of the control concrete. The aggregate size also had a significant effect on the strength of pervious concrete. The compressive strength and flexural strength of pervious concrete with large aggregate were higher than that with small aggregate.
 Keywords
cement paste;pervious concrete;void ratio;fly ash;compressive strength;flexural strength;
 Language
English
 Cited by
1.
Development of Vegetation-Pervious Concrete in Grid Beam System for Soil Slope Protection, Materials, 2017, 10, 12, 96  crossref(new windwow)
2.
Mechanical properties, thermal conductivity, and sound absorption of pervious concrete containing recycled concrete and bottom ash aggregates, KSCE Journal of Civil Engineering, 2017  crossref(new windwow)
 References
1.
Aamer Rafique Bhutta, M., Tsuruta, K. and Mirza, J. (2012), "Evaluation of high-performance pervious concrete properties", Constr. Build. Mater., 31, 67-73. crossref(new window)

2.
ACI Committee 522 (2010), ACI 522R-10 Report on pervious concrete, American Concrete Institute, Farmington Hills, MI, USA.

3.
ASTM C 39/C 39M-10 (2010), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, 04.02, USA.

4.
ASTM C 78-10 (2010), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), Annual Book of ASTM Standards, 04.02, USA.

5.
ASTM C 618-08a (2008), Standard Test Method for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, Annual Book of ASTM Standards, 04.02, USA.

6.
ASTM C 944/C 944M-12 (2012), Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, Annual Book of ASTM Standards, 04.02, USA.

7.
ASTM C 1754/C 1754-12 (2012), Standard Test Method for Density and Void Content of Hardened Pervious Concrete, Annual Book of ASTM Standards, 04.02, USA.

8.
Chindaprasirt, P., Hatanaka, S., Chareerat, T., Mishima, N. and Yuasa, Y. (2008), "Cement paste characteristics and pervious concrete properties", Constr. Build. Mater., 22(5), 894-901. crossref(new window)

9.
Chindaprasirt, P., Hatanaka, T., Mishima, N., Yuasa, Y. and Chareerat, S. (2009), "Effects of binder strength and aggregate size on the compressive strength and void ratio of porous concrete", Int. J. Minerals Metall. Mater., 16(6), 714-9.

10.
Delatte, N., Miller, D. and Mrkajic, A. (2007), Portland cement pervious concrete pavement: Field performance investigation on parking lot and roadway pavements, RMC Research & Education Foundation, Cleveland, Ohio, USA.

11.
Deo, O. and Neithalath, N. (2010), "Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features", Mater. Sci. Eng., 528(1), 402-412. crossref(new window)

12.
Deo, O. and Neithalath, N. (2011), "Compressive response of pervious concrete proportioned for desired porosities", Constr. Build. Mater., 25(11), 4181-4189. crossref(new window)

13.
Golroo, A. and Tighe, S.L. (2011), "Alternative modeling framework for pervious concrete pavement condition analysis", Cement Concrete Res., 25(10), 4043-4051.

14.
Hatanaka, S., Mishima, N., Yuasa, Y., Maegawa, A., Nakagawa, T. and Kuroda, M. (2006), "Fundamentals and a few recent applications of environmentally friendly pervious concrete", International Conference on Pozzolan, Concrete and Geopolymer.

15.
Haselbach, L.M., Valavala, S. and Montes, F. (2006), "Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems", J. Environ. Manage., 81(1), 42-49. crossref(new window)

16.
JIS Committee (1997), Physical Testing Methods for Cement (JIS R 5201), Japanese Industrial Standards, Japan.

17.
Kim, H.K. and Lee, H.K. (2010), "Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of pervious concrete", Appl. Acoust., 71(7), 607-615. crossref(new window)

18.
Leming, M.L., Malcom, H.R. and Tennis, P.D. (2007), Hydrologic design of pervious concrete, Portland Cement Association (PCA), Skokie, Illinois, USA.

19.
Lian, C., Zhuge, Y. and Beecham, S. (2011), "The relationship between porosity and strength for pervious concrete", Constr. Build. Mater., 25(11), 4294-4298. crossref(new window)

20.
Limbachiya, M., Meddah, M.S. and Ouchagour, Y. (2012), "Use of recycled concrete aggregate in fly-ash concrete", Constr. Build. Mater., 27(1), 439-449.

21.
Neithalath, N., Sumanasooriya, M.S. and Deo, O. (2010), "Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction", Mater. Charact., 61(8), 802-813. crossref(new window)

22.
Park, S.B., Jang, Y.I., Lee, J. and Lee, B.J. (2009), "An experimental study on the hazard assessment and mechanical properties of pervious concrete utilizing coal bottom ash coarse aggregate in Korea", J. Hazard. Mater., 166(1), 348-355. crossref(new window)

23.
Park, S.B. and Tia, M. (2004), "An experimental study on the water-purification properties of pervious concrete", Cement Concrete Res., 34(2), 177-184. crossref(new window)

24.
Putman, B.J. and Neptune, A.I. (2011), "Comparison of test specimen preparation techniques for pervious concrete pavements", Constr. Build. Mater., 25(8), 3480-3485. crossref(new window)

25.
Ramanathan, P., Baskar, I., Muthupriya, P. and Venkatasubramani, R. (2013), "Performance of selfcompacting concrete containing different mineral admixtures", KSCE J. Civil Eng., 17(2), 465-472. crossref(new window)

26.
Rukzon, S. and Chindaprasirt, P. (2008), "Mathematical model of strength and porosity of ternary blend Portland rice husk ash and fly ash cement mortar", Comput. Concrete, 5(1), 1-6. crossref(new window)

27.
Sata, V., Khammathit, P. and Chindaprasirt, P. (2008), "Efficiency factor of high-calcium Class F fly ash in concrete", Comput. Concrete, 8(5), 583-595.

28.
Shu, X., Huang, B., Wu, H., Dong, Q. and Burdette, E.G. (2011), "Performance comparison of laboratory and field produced pervious concrete mixtures", Constr. Build. Mater., 25(8), 3187-3192. crossref(new window)

29.
Siddique, R. (2003), "Effect of fine aggregate replacement with Class F fly ash on the abrasion resistance of concrete", Cement Concrete Res., 33(11), 1877-1881. crossref(new window)

30.
Siddique, R. (2004), "Performance characteristics of high-volume Class F fly ash concrete", Cement Concrete Res., 34(3), 487-493. crossref(new window)

31.
Siddique, R. and Khatib, J.M. (2010), "Abrasion resistance and mechanical properties of high-volume fly ash concrete", Mater. Struct., 43, 709-718. crossref(new window)

32.
Silva, P. and De Brito, J. (2013), "Electrical resistivity and capillarity of self-compacting concrete with incorporation of fly ash and limestone filler", Adv. Concrete Constr., 1(1), 65-84. crossref(new window)

33.
Sumanasooriya, M.S. and Neithalath, N. (2011), "Pore structure features of pervious concretes proportioned for desired porosities and their performance prediction", Cement Concrete Compos., 33(8), 778-787. crossref(new window)

34.
Sunil, B.M., Manjunatha, L.S., Ravi, L. and Yaragal, S.C. (2015), "Potential use of mine tailings and fly ash in concrete", Adv. Concrete Constr., 3(1), 55-69. crossref(new window)

35.
Tamai, M., Mizuguchi, H., Hatanaka, S., Nakazawa, T., Yanagibashi, K. and Kunieda, M. (2004), "Design, construction and recent applications of pervious concrete in japan", Proceedings of the JCI Symposium on Design, Construction and Recent Applications of Pervious concrete, JCI., Tokyo, April.

36.
Tangpagasit, J., Cheerarot, R., Jaturapitakkul, C. and Kiattikomol, K. (2005), "Packing effect and pozzolanic reaction of fly ash in mortar", Cement Concrete Res., 35(6), 1145-1151. crossref(new window)

37.
Tennis, P.D., Leming, M.L. and Akers, D.J. (2004), Pervious Concrete Pavements, Portland Cement Association (PCA), Skokie, Illinois, USA.

38.
Tho-in, T., Sata, V., Chindaprasirt, P. and Jaturapitakkul, C. (2012), "Pervious high-calcium fly ash geopolymer concrete", Constr. Build. Mater., 30, 366-371. crossref(new window)

39.
Uchida, T., Ooyabu, K., Nakano, N. and Matsumoto, H. (2004), "A method of pervious concrete work for construction of high permeability steep revetment with permeable blocks", Proceedings of the JCI Symposium on Design, Construction and Recent Applications of Pervious concrete, Tokyo, April.

40.
Vimonsatit, V., Chindaprasirt, P., Ruangsiriyakul, S. and Sata, V. (2015), "Influence of fly ash fineness on water requirement and shrinkage of blended cement mortars", KKU Eng. J., 42(4), 311-316.

41.
Woo, S.K., Song, Y.C. and Won, J. (2011), "Enhanced durability performance of face slab concrete in concrete-faced rock-filled dam using fly ash and PVA fiber", KSCE J. Civil Eng., 15(5), 875-882. crossref(new window)

42.
Yang, J. and Jiang, G. (2003), "Experimental study on properties of pervious concrete pavement materials", Cement Concrete Res., 33(3), 381-386. crossref(new window)

43.
Yen, T., Hsu, T.H., Liu, Y.W. and Chen, S.H. (2007), "Influence of class F fly ash on the abrasion-erosion resistance of high-strength concrete", Constr. Build. Mater., 21(2), 458-463. crossref(new window)

44.
Zaetang, Y., Wongsa, A., Sata, V. and Chindaprasirt, P. (2013), "Use of lightweight aggregates in pervious concrete", Constr. Build. Mater., 48, 585-591. crossref(new window)