JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Prediction of chloride binding isotherms for blended cements
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Computers and Concrete
  • Volume 17, Issue 5,  2016, pp.655-672
  • Publisher : Techno-Press
  • DOI : 10.12989/cac.2016.17.5.655
 Title & Authors
Prediction of chloride binding isotherms for blended cements
Ye, Hailong; Jin, Xianyu; Chen, Wei; Fu, Chuanqing; Jin, Nanguo;
 Abstract
A predictive model for chloride binding isotherms of blended cements with various supplementary cementitious materials (SCMs) was established in this work. Totally 560 data points regarding the chloride binding isotherms of 106 various cements were collected from literature. The total amount of bound chloride for each mixture was expressed a combinational function of the predicted phase assemblage and binding isotherms of various hydrated phases. New quantitative expressions regarding the chloride binding isotherms of calcium-silicate-hydrate (C-S-H), AFm, and hydrotalcite phases were provided. New insights about the roles of SCMs on binding capabilities of ordinary portland cements (OPC) were discussed. The proposed model was verified using separate data from different sources and was shown to be reasonably accurate.
 Keywords
cement;corrosion;degradation;computer-aided design & integration;reinforced concrete (RC);
 Language
English
 Cited by
1.
Chloride penetration into concrete damaged by uniaxial tensile fatigue loading, Construction and Building Materials, 2016, 125, 714  crossref(new windwow)
2.
Simple Technique for Tracking Chloride Penetration in Concrete Based on the Crack Shape and Width under Steady-State Conditions, Sustainability, 2017, 9, 2, 282  crossref(new windwow)
3.
Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments, Construction and Building Materials, 2016, 127, 733  crossref(new windwow)
 References
1.
Amey, S.L., Johnson, D.A., Miltenberger, M.A. and Farzam, H. (1998), "Predicting the service life of concrete marine structures: an environmental methodology", ACI Struct. J., 95(2), 205-214.

2.
Angst, U., Elsener, B., Larsen, C.K. and Vennesland, O. (2009), "Critical chloride content in reinforced concrete-a review", Cement Concrete Res., 39(12), 1122-1138. crossref(new window)

3.
Arya, C., Buenfeld, N. and Newman, J. (1990), "Factors influencing chloride-binding in concrete", Cement Concrete Res., 20(2), 291-300. crossref(new window)

4.
Arya, C. and Xu, Y. (1995), "Effect of cement type on chloride binding and corrosion of steel in concrete", Cement Concrete Res., 25(4), 893-902. crossref(new window)

5.
Baroghel-Bouny, V., Wang, X., Thiery, M., Saillio, M. andd Barberon, F. (2012), "Prediction of chloride binding isotherms of cementitious materials by analytical model or numerical inverse analysis", Cement Concrete Res., 42(9), 1207-1224. crossref(new window)

6.
Boulfiza, M., Sakai, K., Banthia, N. and Yoshida, H. (2003), "Prediction of chloride ions ingress in uncracked and cracked concrete", ACI Mater. J., 100(1).

7.
Brouwers, H. (2004), "The work of Powers and Brownyard revisited: Part 1", Cement Concrete Res., 34(9), 1697-1716. crossref(new window)

8.
Castellote, M., Andrade, C. and Alonso, C. (1999), "Chloride-binding isotherms in concrete submitted to non-steady-state migration experiments", Cement Concrete Res., 29(11), 1799-1806. crossref(new window)

9.
Chen, W. (2016), "Study on chloride binding and transportation of mortars in salt-fog wetting-drying environments (in Chinese)", (Master of Science), Zhejiang University.

10.
De Weerdt, K., Orsakova, D. and Geiker, M. (2014), "The impact of sulphate and magnesium on chloride binding in Portland cement paste", Cement Concrete Res., 65, 30-40. crossref(new window)

11.
Delagrave, A., Marchand, J., Ollivier, J.P., Julien, S. and Hazrati, K. (1997), "Chloride binding capacity of various hydrated cement paste systems", Adv. Cement Mater., 6(1), 28-35. crossref(new window)

12.
Florea, M. and Brouwers, H. (2012), "Chloride binding related to hydration products: Part I: Ordinary Portland Cement", Cement Concrete Res., 42(2), 282-290. crossref(new window)

13.
Fu, C., Jin, X., Ye, H. and Jin, N. (2015), "Theoretical and experimental investigation of loading effects on chloride diffusion in saturated concrete", J. Adv. Concrete Tech., 13(1), 30-43. crossref(new window)

14.
Hirao, H., Yamada, K., Takahashi, H. and Zibara, H. (2005), "Chloride binding of cement estimated by binding isotherms of hydrates", J. Adv. Concrete Tech., 3(1), 77-84. crossref(new window)

15.
Ipavec, A., Vuk, T., Gabrovsek, R. and Kaucic, V. (2013), "Chloride binding into hydrated blended cements: The influence of limestone and alkalinity", Cement Concrete Res., 48, 74-85. crossref(new window)

16.
Kayali, O., Khan, M. and Ahmed, M.S. (2012), "The role of hydrotalcite in chloride binding and corrosion protection in concretes with ground granulated blast furnace slag", Cement Concrete Compos., 34(8), 936-945. crossref(new window)

17.
Kulik, D., Berner, U. and Curti, E. (2003), "Modelling chemical equilibrium partitioning with the GEMSPSI code", PSI Scientific Report, 4, 109-122.

18.
Lee, M.K., Jung, S.H. and Oh, B.H. (2013), "Effects of carbonation on chloride penetration in concrete", ACI Mater. J., 110(5).

19.
Loser, R., Lothenbach, B., Leemann, A. and Tuchschmid, M. (2010), "Chloride resistance of concrete and its binding capacity-Comparison between experimental results and thermodynamic modeling", Cement Concrete Compos., 32(1), 34-42. crossref(new window)

20.
Lothenbach, B. and Gruskovnjak, A. (2007), "Hydration of alkali-activated slag: thermodynamic modelling", Adv. Cement Res., 19(2), 81-92. crossref(new window)

21.
Lothenbach, B., Scrivener, K. and Hooton, R. (2011), "Supplementary cementitious materials", Cement Concrete Res., 41(12), 1244-1256. crossref(new window)

22.
Luo, R., Cai, Y., Wang, C. and Huang, X. (2003), "Study of chloride binding and diffusion in GGBS concrete", Cement Concrete Res., 33(1), 1-7. crossref(new window)

23.
Martin-Pérez, B., Zibara, H., Hooton, R. and Thomas, M. (2000), "A study of the effect of chloride binding on service life predictions", Cement Concrete Res., 30(8), 1215-1223. crossref(new window)

24.
Mien, T.V., Nawa, T. and Stitmannaithum, B. (2014), "Chloride binding isotherms of various cements basing on binding capacity of hydrates", Comput. Concrete, 13(6), 695-707. crossref(new window)

25.
Mien, T.V., Stitmannaithum, B. and Nawa, T. (2009), "Simulation of chloride penetration into concrete structures subjected to both cyclic flexural loads and tidal effects", Comput. Concrete, 6(5), 421-435. crossref(new window)

26.
Neville, A. (1995), "Chloride attack of reinforced concrete: an overview", Mater. Struct., 28(2), 63-70. crossref(new window)

27.
Richardson, I. (2008), "The calcium silicate hydrates", Cement Concrete Res., 38(2), 137-158. crossref(new window)

28.
Sergi, G., Yu, S. and Page, C. (1992), "Diffusion of chloride and hydroxyl ions in cementitious materials exposed to a saline environment", Mag Concrete Res., 44(158), 63-69. crossref(new window)

29.
Tang, L. and Nilsson, L.O. (1993), "Chloride binding capacity and binding isotherms of OPC pastes and mortars", Cement Concrete Res., 23(2), 247-253. crossref(new window)

30.
Thomas, M., Hooton, R., Scott, A. and Zibara, H. (2012), "The effect of supplementary cementitious materials on chloride binding in hardened cement paste", Cement Concrete Res., 42(1), 1-7. crossref(new window)

31.
Vu, K.A.T. and Stewart, M.G. (2000), "Structural reliability of concrete bridges including improved chloride-induced corrosion models", Struct. Safe., 22(4), 313-333. crossref(new window)

32.
Yang, Z., Fischer, H. and Polder, R. (2012), Possibilities for improving corrosion protection of reinforced concrete by modified hydrotalcites-a literature review Advances in Modeling Concrete Service Life (pp. 95-105), Springer.

33.
Ye, H., Fu, C., Jin, N. and Jin, X. (2015), "Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition", Comput. Concrete, 15(2), 183-198. crossref(new window)

34.
Ye, H., Jin, N., Jin, X. and Fu, C. (2012), "Model of chloride penetration into cracked concrete subject to drying-wetting cycles", Constr. Build. Mater., 36, 259-269. crossref(new window)

35.
Ye, H., Jin, X., Fu, C., Jin, N., Xu, Y. and Huang, T. (2016), "Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation", Constr. Build. Mater., 112, 457-463. crossref(new window)

36.
Ye, H., Tian, Y., Jin, N., Jin, X. and Fu, C. (2013), "Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions", Constr. Build. Mater., 47, 66-79. crossref(new window)

37.
Zibara, H. (2001), "Binding of external chlorides by cement pastes", Ph.D. Thesis, Universityof Toronto.

38.
Zibara, H., Hooton, R., Thomas, M. and Stanish, K. (2008), "Influence of the C/S and C/A ratios of hydration products on the chloride ion binding capacity of lime-SF and lime-MK mixtures", Cement Concrete Res., 38(3), 422-426. crossref(new window)