Advanced SearchSearch Tips
A study of the fresh properties of Recycled ready-mixed soil materials (RRMSM)
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Computers and Concrete
  • Volume 17, Issue 6,  2016, pp.787-799
  • Publisher : Techno-Press
  • DOI : 10.12989/cac.2016.17.6.787
 Title & Authors
A study of the fresh properties of Recycled ready-mixed soil materials (RRMSM)
Huang, Wen-Ling; Wang, Her-Yung; Chen, Jheng-Hung;
Climate anomalies in recent years, numerous natural disasters caused by landslides and a large amount of entrained sands and stones in Taiwan have created significant disasters and greater difficulties in subsequent reconstruction. How to respond to these problems efficaciously is an important issue. In this study, the sands and stones were doped with recycled materials (waste LCD glass sand, slag powder), and material was mixed for recycled ready-mixed soil. The study is based on security and economic principles, using flowability test to determine the water-binder ratio (W/B
Recycled Ready-Mixed Soil Materials (RRMSM);waste LCD glass sand;waste-to-resource;
 Cited by
Achtemichuk, S., Hubbard, J., Sluce, R. and Shehata, M.H. (2009), "The utilization of recycled concrete aggregate to produce controlled low-strength materials without using Portland cement", Cement Concrete Compos., 31(8), 564-569. crossref(new window)

ACI 229R- 99, Controlled Low-strength Material (CLSM), ACI Committee.

ASTM D6103, Standard Test Method for Flow Consistency of Controlled Low Strength Material(CLSM).

ASTM C33, Standard Specification for Concrete Aggregates.

ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.

ASTM C143, Standard Test Method for Slump of Cement Concrete.

ASTM C150, American Society for Testing and Materials, Standard Specification for Portland cement.

ASTM C1602, Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete.

ASTM C403, Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance.

ASTM D 6023, Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM).

ASTM D 6024, ASTM D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application.

ASTM D 6103, Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM).

Chen, J.W. and Chang, C.F. (2003), "Development and application of the ready-mixed soil material", Proceedings of the 14th International Society of Offshore and Polar Engineering Conference (ISOPE), Toulon France.

CNS 12549, Concrete and cement plaster material ballast water quenched blast furnace dust.

Katz, A. and Kovler, K. (2004), "Utilization of industrial by-products for the production of controlled low strength materials (CLSM)", Waste Manage., 24(5), 501-512. crossref(new window)

Khatib, J.M. (2005), "Properties of concrete incorporating fine recycled aggregate", Cement Concrete Res., 35(4), 763-769. crossref(new window)

Lee, S.T., Moon, H.Y., Swamy, R.N., Kim, S.S. and Kim, J.P. (2005), "Sulfate attack of mortars containing recycled fine aggregates", ACI Mater. J., 102(4), 224-230.

Lachemi, M., Hossain, K.M., Shehata, M. and Thaha, W. (2007), "Characteristics of controlled low-strength materials incorporating cement kiln dust", Can. J. Civil Eng., 34(4), 485-495. crossref(new window)

Mejeoumov, G.G., Shon, C.S., Saylak, D. and Estakhri, C.K. (2010), "Potential use of stockpiled circulating fluidized bed combustion ashes in controlled low strength material (CLSM) mixture", Constr. Build. Mater., 24(5), 839-847. crossref(new window)

Nataraja, M.C. and Nalanda, Y. (2008), "Performance of industrial by-products in controlled low-strength materials (CLSM)", Waste Manage., 28(7), 1168-1181. crossref(new window)

Naik, T.R., Singh, S.S. and Ramme, B.W. (2001), "Performance and leaching assessment of flowable slurry", J. Envir. Eng., 127(4), 359-368. crossref(new window)

Naik, T.R., Kraus, R.N. and Siddique, R. (2003), "Controlled low-strength materials containing mixtures of coal ash and new pozzolanic material", ACI Mater. J., 100(3), 208-215.

Naik, T.R., Kraus, R.N., Ramme, B.W., Chun, Y.M. and Kumar, R. (2006), "High-carbon fly ash in manufacturing conductive CLSM and concrete", J. Mater. Civil Eng., 18(6), 743-746. crossref(new window)

Naganathan, S., Razak, H.A. and Hamid, S.N.A. (2012), "Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust", Mater. Des., 33, 56-63. crossref(new window)

Pierce, C.E. and Blackwell, M.C. (2003), "Potential of scrap tire rubber as lightweight aggregate in flowable fill", Waste Manage., 23(3), 197-208. crossref(new window)

Pierce, C.E., Tripathi, H. and Brown, T.W. (2003), "Cement kiln dust in controlled low-strength materials", ACI Mater. J., 100(6), 455-462.

Siddique, R. (2009), "Utilization of waste materials and by-products in producing controlled low-strength materials", Resour. Conserv. Recy., 54(1), 1-8. crossref(new window)

Razak, H.A., Naganathan, S. and Hamid, S.N.A. (2009), "Performance appraisal of industrial waste incineration bottom ash as controlled low-strength material", J. Hazard. Mater., 172(2), 862-867. crossref(new window)

Rahal, K. (2007), "Mechanical properties of concrete with recycled coarse aggregate", Build. Envir., 42(1), 407-415. crossref(new window)

Siddique, R. (2009), "Utilization of waste materials and by-products in producing controlled low-strength materials", Resour. Conserv. Recy., 54(1), 1-8. crossref(new window)

Terro, M.J. (2006), "Properties of concrete made with recycled crushed glass at elevated temperatures", Build. Envir., 41(5), 633-639. crossref(new window)

Tu, T.Y., Chen, Y.Y. and Hwang, C.L. (2006), "Properties of HPC with recycled aggregates", Cement Concrete Res., 36(5), 943-950. crossref(new window)

Topcu, I.B. and Canbaz, M. (2004), "Properties of concrete containing waste glass", Cement Concrete Res., 34(2), 267-274. crossref(new window)

Tong, C.C. (2007), "A study of the impact and damaging behaviors of adding polypropylene fiber into ready-mixed soil material", the achievement report of a specific research project of the National Science Council, the Executive Yuan.

Tikalsky, P.J., Bahia, H.U., Deng, A. and Snyder, T. (2004), "Excess foundry sand characterization and experimental investigation in controlled low-strength material and hot-mixing asphalt (No. DE-FC36-01ID13974)", The Pennsylvania State University/Pennsylvania Transportation Institute.

Turkel, S. (2006), "Long-term compressive strength and some other properties of controlled low strength materials made with pozzolanic cement and Class C fly ash", J. Hazard. Mater., 137(1), 261-266. crossref(new window)

Turkel, S. (2007), "Strength properties of fly ash based controlled low strength materials", J. Hazard. Mater., 147(3), 1015-1019. crossref(new window)

Tseng, C.C. (2009), "Competitiveness analysis of display panel industry in Taiwan and Korea (II)", Quality magazine is published by the Chinese society for quality, 45(2), 48-52.

Wang, H.Y. and Huang, W.L. (2010), "Durability of self-consolidating concrete using waste LCD glass", Constr. Build. Mater., 24(6), 1008-1013. crossref(new window)

Wang, H.Y. and Chen, J.S. (2008), "Study of thin film transition liquid crystal display (TFT-LCD) optical waste glass applied in early-high-strength controlled low strength materials", Comput. Concrete, 5(5), 491-501. crossref(new window)