JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of the PC, diatomite and zeolite on the performance of concrete composites
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Computers and Concrete
  • Volume 17, Issue 6,  2016, pp.815-829
  • Publisher : Techno-Press
  • DOI : 10.12989/cac.2016.17.6.815
 Title & Authors
Effect of the PC, diatomite and zeolite on the performance of concrete composites
Kocak, Yilmaz; Savas, Muhsin;
 Abstract
This study has been carried out to investigate the effect of the surface properties of Portland cement, diatomite and zeolite on the performance of concrete composites. In this context, to describe the materials used in this study and determine the properties of them, chemical, physical, mineralogical, molecular, thermal, and zeta potential analysis have been applied. In the study, reference (Portland cement), 10%-20% diatomite, 10%-20% zeolite, 5+5%-10+10% diatomite and zeolite were substituted for Portland cement, a total of 7 different cements were obtained. Ultrasonic pulse velocity, capillary water absorption and compressive strength tests were performed on the hardened concrete specimens. Hardened concrete tests have been done on seven different types of concrete, for 28, 56 and 90 days. As a result of experiments it has been identified that both the zeolite and diatomite substitution has a positive effect on the performance of concrete.
 Keywords
concrete;diatomite;zeolite;zeta potential;strength;
 Language
English
 Cited by
 References
1.
Aruntas, H.Y. and Tokyay, M. (1996), "The use of diatomite as pozzolanic material in blended cement production", Cement Concrete World, 1(4), 3-41.

2.
ASTM C 618-85. (1985), Standard specifications for fly ash and raw or calcined natural pozzolan for use as mineral admixture in Portland cement concrete, ASTM, Philadelphia, USA. 827

3.
Yilmaz Kocak and Muhsin Savas Canpolat, F. (2002), "Utilization of natural zeolite and industrial waste in improving cement performance in cement production", Doctorate Thesis, Suleyman Demirel University, Graduate School of Science, Engineering and Technology; Sakarya (in Turkey).

4.
Erdogan, T.Y. (2010), Concrete, Metu Press Publishing Company ; Ankara, Turkey.

5.
Gabrovsek, R., Vuk, T. and Kaucic, V. (2006), "Evaluation of the hydration of Portland cement containing various carbonates by means of thermal analysis", Acta Chim. Slov, 53, 159-165.

6.
Gerengi, H., Kocak, Y., Jazdzewska, A., Kurtay, M. and Durgun, H. (2013), "Electrochemical investigations on the corrosion behaviour of reinforcing steel in diatomite-and zeolite-containing concrete exposed to sulphuric acid", Constr. Build. Mater., 49, 471-477. crossref(new window)

7.
Gerengi, H., Kurtay, M. and Durgun, H. (2015), "The effect of zeolite and diatomite on the corrosion of reinforcement steel in 1M HCl solution", Result. Phys., 5, 148-153. crossref(new window)

8.
Ghrici, M., Kenai, S. and Said-Mansour, M. (2007), "Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements", Cement Concrete Compos., 29(7), 542-549. crossref(new window)

9.
Gomes, C.E.M., Ferreira, O.P. and Fernandes, M.R. (2005), "Influence of vinyl acetate-versatic vinylester copolymer on the microstructural characteristics of cement pastes", Mater. Res., 8(1), 51-56. crossref(new window)

10.
Goni, S., Frias, M., de la Villa, R.V. and Garcia, R. (2013), "Sodium chloride effect on durability of ternary blended cement. Microstructural characterization and strength", Compos. Part B: Eng., 54, 163-168. crossref(new window)

11.
Govin, A., Peschard, A. and Guyonnet, R. (2006), "Modification of cement hydration at early ages by natural and heated wood", Cement Concrete Compos., 28(1), 12-20. crossref(new window)

12.
Jia, Y., Han, W., Xiong, G. and Yang, W. (2008), "A method for diatomite zeolitization through steam-assisted crystallization with in-situ seeding", Mater. lett., 62(16), 2400-2403. crossref(new window)

13.
Jozic, D. and Zelic, J. (2006), "The effect of fly ash on cement hydration in aqueous suspensions", Ceramics-Silikaty, 50(2), 98-105.

14.
Karakaya, M.C. (2006), Properties of clay minerals and identification methods, Bizim Buro Press Publishing Company; Ankara, Turkey.

15.
Kelestemur, O. (2010), "Utilization of waste vehicle tires in concrete and its effect on the corrosion behavior of reinforcing steels", Int. J. Min., Metallurgy Mater., 17(3), 363-370. crossref(new window)

16.
Kelestemur, O. and Demirel, B. (2010), "Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume", Constr. Build. Mater., 24, 1898-1905. crossref(new window)

17.
Kocak, Y., Tasci, E. and Kaya, U. (2013), "The effect of using natural zeolite on the properties and hydration characteristics of blended cements", Constr. Build. Mater., 47, 720-727. crossref(new window)

18.
Mozgawa, W. (2001), "The relation between structure and vibrational spectra of natural zeolites", J. Mol. Struct., 596(1), 129-137. crossref(new window)

19.
Nachbaur, L., Nkinamubanzi, P.C., Nonat, A. and Mutin, J.C. (1998), "Electrokinetic properties which control the coagulation of silicate cement suspensions during early age hydration", J. Colloid Interf. Sci., 202(2), 261-268. crossref(new window)

20.
Pan, Z., Cheng, L., Lu, Y. and Yang, N. (2002), "Hydration products of alkali-activated slag-red mud cementitious material", Cement Concrete Res., 32, 357-362. crossref(new window)

21.
Perraki, T. and Orfanoudaki, A. (2004), "Mineralogical study of zeolites from Pentalofos area, Thrace, Greece", Appl. Clay Sci., 25(1), 9-16. crossref(new window)

22.
Serbest, D. (1999), "The use of natural zeolites in the industry of the light construction", Master's Thesis, Anadolu University, Graduate School of Science, Engineering and Technology; Eskisehir (in Turkey).

23.
Siddique, R. and Kadri, E.H. (2011), "Effect of metakaolin and foundry sand on the near surface characteristics of concrete", Constr. Build. Mater., 25(8), 3257-3266. crossref(new window)

24.
Skripkiunas, G., Sasnauskas, V., Dauksys, M. and Palubinskaite, D. (2007), "Peculiarities of hydration of cement paste with addition of hydrosodalite", Mater. Sci.-Poland, 25(3), 627-635.

25.
Sprynskyy, M., Kovalchuk, I. and Buszewski, B. (2010), "The separation of uranium ions by natural and modified diatomite from aqueous solution", J. Hazard. Mater., 181(1), 700-707. crossref(new window)

26.
Termkhajornkit, P. and Nawa, T. (2004), "The fluidity of fly ash-cement paste containing naphthalene sulfonate superplasticizer", Cement Concrete Res., 34(6), 1017-1024. crossref(new window)

27.
Topcu, I.B., Bilir, T. and Uygunoglu, T. (2009), "Effect of waste marble dust content as filler on properties of self-compacting concrete", Constr. Build. Mater., 23(5), 1947-1953. crossref(new window)

28.
TS 802. (2009), Design of concrete mixes, Turkish Standards, Ankara (in Turkey).

29.
TS EN 12350-2 (2010), Testing fresh concrete-Part 2: Slump test, Turkish Standards, Ankara (in Turkey).

30.
TS EN 12390-3 (2003), Testing hardened concrete-Part 3: Compressive strength of test specimens, Turkish Standards, Ankara (in Turkey).

31.
Varela, M.B., Ramirez, S.M., Erena, I., Gener, M. and Carmona, P. (2006), "Characterization and pozzolanicity of zeolitic rocks from two Cuban deposits", Appl. Clay Sci., 33(2), 149-159. crossref(new window)

32.
Viallis-Terrisse, H., Nonat, A. and Petit, J.C. (2001), "Zeta-potential study of calcium silicate hydrates interacting with alkaline cations", J. Colloid Interf. Sci., 244(1), 58-65. crossref(new window)

33.
Wang, X.Y., Cho, H.K. and Lee, H.S. (2011), "Prediction of temperature distribution in concrete incorporating fly ash or slag using a hydration model", Compos. Part B: Eng., 42(1), 27-40. crossref(new window)

34.
Yildiz, K., Dorum, A. and Kocak, Y. (2010), "The investigation of the effect of minerological molecular electrokinetical and thermal compliance of pumice, zeolite and CEM I cement on high strength concrete", Journal of the Faculty of Engineering and Architecture of Gazi University, 25 (4), 867-879.

35.
Yildiz, K., Dorum, A. and Kocak, Y. (2010), "The investigation of the effect of minerological molecular electrokinetical and thermal compliance of pumice, zeolite and CEM I cement on high strength concrete", J. Fac. Eng. Archit. Gazi Univ., 25(4), 867-879.

36.
Yoshioka, K., Tazawa, E.I., Kawai, K. and Enohata, T. (2002), "Adsorption characteristics of superplasticizers on cement component minerals", Cement Concrete Res., 32(10), 1507-1513. crossref(new window)