JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The deformable multilaminate for predicting the Elasto-Plastic behavior of rocks
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Computers and Concrete
  • Volume 18, Issue 2,  2016, pp.201-214
  • Publisher : Techno-Press
  • DOI : 10.12989/cac.2016.18.2.201
 Title & Authors
The deformable multilaminate for predicting the Elasto-Plastic behavior of rocks
Haeri, Hadi; Sarfarazi, V.;
 Abstract
In this paper, a multilaminate based model have been developed and presented to predict the strain hardening behavior of rock. In this multilaminate model, the stress-strain behavior of a material is obtained by integrating the mechanical response of an infinite number of predefined oriented planes passing through a material point. Essential features such as the variable deformations hypothesis and multilaminate model are discussed. The methodology to be discussed here is modeling of strains on the 13 laminates passing through a point in each loading step. Upon the presented methodology, more attention has been given to hardening in non-linear behaviour of rock in going from the peak to residual strengths. The predictions of the derived stress-strain model are compared to experimental results for marble, sandstone and dense Cambria sand. The comparisons demonstrate the ability of this model to reproduce accurately the mechanical behavior of rocks.
 Keywords
multilaminate model;variable deformations hypothesis;elasto-plastic behavior;
 Language
English
 Cited by
 References
1.
Antunes, F.V. and Rodrigues, D.M. (2008), "Numerical simulation of plasticity induced crack closure: Identification and discussion of parameters", Eng. Fract. Mech., 75(10), 3101-3120. crossref(new window)

2.
Batdorf, S.B. and Budiansky, B. (1949), "A mathematical theory of plasticity based on the concept of slip", National Advisory Committee for Aeronautics, TN 1871.

3.
Brewer, R. (1964), Fabric and mineral analysis of soils. Wiley: New York, 129-158.

4.
Brinkgreve, R.B.J., Broere, W. and Waterman, D. (2006), Plaxis, finite element code for soil and rock analyses, Users Manual, PLAXIS b.v., The Netherlands.

5.
Calladine, C.R. (1971), "A microstructural view of the mechanical properties of saturated clay", Geotech., 21(4), 391-415. crossref(new window)

6.
Caputo, F., Lamanna, G. and Soprano, A. (2013), "On the evaluation of the plastic zone size at the crack tip", Eng. Fract. Mech., 103, 162-173. crossref(new window)

7.
Chang, C.S. and Hicher, P.Y. (2005), "An elasto-plastic model for granular materials with macrostructural consideration", Int. J. Solid. Struct., 42, 4258-4277. crossref(new window)

8.
Christofferson, C., Mehrabadi, M.M, Nemat-Nasser, S.A. (1981), "Macromechanical description of granular behavior", J. Appl. Mech., 48, 339-344. crossref(new window)

9.
Drucker, D.C. (1959), "A definition of a stable inelastic material", J. Appl. Mech., 26, 101-106.

10.
Fathi, A., Moradian, Z., Rivard, P. and Ballivy, G. (2016), "Shear mechanism of rock joints under pre-peak cyclic loading condition", Int. J. Rock Mech. Min. Sci., 83, 197-210.

11.
Ghadrdan, M., Sadrnejad, S.A. and Shaghaghi, T. (2015), "Numerical evaluation of geomaterials behavior upon multiplane damage model", Comput. Geotech., 68, 1-7. crossref(new window)

12.
Haeri, H. (2015a), "Influence of the inclined edge notches on the shear-fracture behavior in edge-notched beam specimens", Comput. Concrete , 16(4), 605-623, crossref(new window)

13.
Haeri, H. (2015a), Coupled experimental-numerical fracture mechanics, Lambert academic press, Germany

14.
Haeri, H. (2015b), "Experimental crack analysis of rock-like CSCBD specimens using a higher order DDM", Comput. Concrete, 16(6), 881-896. crossref(new window)

15.
Haeri, H. (2015c), "Simulating the crack propagation mechanism of pre-cracked concrete specimens under shear loading conditions", Strength Mater., 47(4), 618-632. crossref(new window)

16.
Haeri, H. (2015d), "Propagation mechanism of neighboring cracks in rock-like cylindrical specimens under uniaxial compression", J. Min. Sci., 51(3), 487-496. crossref(new window)

17.
Haeri, H. and Marji, M.F. (2016b), "Simulating the crack propagation and cracks coalescence underneath TBM disc cutters", Arab. J. Geosci., 9(2), 1-10. crossref(new window)

18.
Haeri, H. and Sarfarazi, V. (2016), "The effect of micro pore on the characteristics of crack tip plastic zone in concrete", Comput. Concrete, 17(1), 107-127. crossref(new window)

19.
Haeri, H., Marji, M.F. and Shahriar, K. (2014c), "Simulating the effect of disc erosion in TBM disc cutters by a semi-infinite DDM", Arab J Geosci., 8(6), 3915-3927

20.
Haeri, H., Marji, M.F., Shahriar, K. and Moarefvand, P. (2015), "On the HDD analysis of micro crack initiation, propagation, and coalescence in brittle materials", Arab. J. Geosci., 8(5), 2841-2852. crossref(new window)

21.
Haeri, H., Shahriar, K., Marji, M.F. and Moaref, Vand P. (2014a), "An experimenta and numerical study of crack propagation and cracks coalescence in the pre-cracked rock-like disc specimens under compression", Int. J. Rock Mech. Min. Sci., 67, 20-28.

22.
Haeri, H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2015), "A coupled numerical-experimental study of the breakage process of brittle substances", Arab. J. Geosci., 8(2), 809-825. crossref(new window)

23.
Maier, G. and Hueckel, T. (1979), "Nonassociated and coupled flow rules of elastoplasticity for rock-like materials", Int. J. Rock Mech., Min. Sci. Geomech. Abst., 16, 77-92.

24.
Mandel, J. (1964), "Conditions de Stabilite et Postulat de Drucker", Proceeding of the IUTAM Symposium on rheology and soil mechanics, Kravichenko, J., Sirieys, P.M. (Eds.), Springer-Verlag, Berlin, 58-68.

25.
Mroz, Z. (1963), "Non-associated flow laws in plasticity", J. Mech., 2, 21-42.

26.
Mroz, Z. (1966), "On forms of constitutive laws for elastic-plastic solids", Arch. Mech. Sto., 18, 1-34.

27.
Nakata, Y., Hyodo, M., Murata, H. and Yasufuku, N. (1998), "Flow deformation of sands subjected to principal stress rotation", Soil. Found., 38(2), 115-128.

28.
Nemat-Nasser, S., Mehrabadi, M.M. (1983), "Stress and fabric in granular masses, mechanics of granular materials", New models and constitutive relations (Eds. J.T. Jenkins and M. Satake), 1-8, Elsevier Sci. Pub.

29.
Nemcik, J., Mirzaghorbanali, A. and Aziz, N. (2014), "An Elasto-Plastic constitutive model for rock joints under cyclic loading and constant normal stiffness conditions", Geotech. Geol. Eng., 32(2), 321-335. crossref(new window)

30.
Pande, G.N. and Sharma, K.G. (1983), "Multi-laminate model of clays-a numerical evaluation of the influence of rotation of the principal stress axes", Int. J. Numer. Anal. Method. Geomech., 7(4), 397-418. crossref(new window)

31.
Sadrnejad, S.A. and Pande, G.N. (1989), "A multilaminate model for sands", Proceedings of the 3rd International Symposium on Numerical Models in Geomechanics (NUMOG), Niagara Falls, Canada, Pietruszczak S, Pande GN (eds). Elsevier: London, 17-27.

32.
Samui, P. (2013), "Multivariate Adaptive Regression Spline (Mars) for prediction of elastic modulus of jointed rock mass", Geotech. Geol. Eng., 31(1), 249-253. crossref(new window)

33.
Schadlich, B. and Schweiger, H.F. (2013), "A multilaminate constitutive model accounting for anisotropic small strain stiffness", Int. J. Numer. Anal. Method. Geomech., 37(10), 1337-1362. crossref(new window)

34.
Scharinger, F. (2007), "A multilaminate model for soil incorporating small strain stiffness", Ph.D. Thesis, Gruppe Geotechnik Graz, Heft 31, Graz University of Technology, Austria.

35.
Scharinger, F. and Schweiger, H.F. (2005), "Undrained response of a double hardening multilaminate model for soils", Proceedings of the 11th International Conference of the International Association of Computer Methods and Advances in Geomechanics (IACMAG), Turin, Italy, Barla G, Barla M (eds). Patron Editore: Bologna, 505-512.

36.
Taylor, G.I. (1958), "Plastic strain in metals", J. Inst. Metal., 62, 307-324 (Reprinted in the Scientific Papers of G. I. Taylor 1. Cambridge University Press: Cambridge, U.K.).

37.
Varadarajan, A., Sharma, K.G, Hashemi, M. Strain (2003), "Softening behaviour of a schistose rock mass under triaxial loading", Technology roadmap for rock mechanics, S. Africa Inst. Min. Metall.

38.
Wang, T.T. and Huang, T.H. (2014), "Anisotropic deformation of a circular tunnel excavated in a rock mass containing sets of ubiquitous joints: Theory analysis and numerical modeling", Rock Mech. Rock Eng., 47(2), 643-657. crossref(new window)

39.
Wiltafsky, C. (2003), "A multilaminate model for normally consolidated clay", Ph.D. Thesis, Gruppe Geotechnik Graz, Heft 18, Graz University of Technology, Austria.

40.
Wu, J.Y. and Xu, S.L. (2011), "An augmented multicrack elastoplastic damage model for tensile cracking", Int. J. Solid. Struct., 48(18), 2511-2528. crossref(new window)

41.
Xin, G., Hangong, W., Xingwu, K. and Liangzhou, J. (2010), "Analytic solutions to crack tip plastic zone under various loading conditions", Eur. J. Mech.-A/Solid., 29(4), 738-745. crossref(new window)

42.
Yi, H., Jingjie, C. and Gang, L. (2010), "A new method of plastic zone size determined based on maximum crack opening displacement", Eng. Fract. Mech., 77(14), 2912-2918. crossref(new window)

43.
Zienkiewicz, O.C. and Pande, G.N. (1977), "Time-dependent multilaminate model of rocks-a numerical study of deformation and failure of rock masses", Int. J. Numer. Anal. Method. Geomech., 1(3), 219-247. crossref(new window)