JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Response modification factor of dual moment-resistant frame with buckling restrained brace (BRB)
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Response modification factor of dual moment-resistant frame with buckling restrained brace (BRB)
Abdollahzadeh, Gholamreza; Banihashemi, Mohammadreza;
 Abstract
Response modification factor is one of the seismic design parameters to consider nonlinear performance of building structures during strong earthquake, in conformity with the point that many seismic design codes led to reduce the loads. In the present paper it`s tried to evaluate the response modification factors of dual moment resistant frame with buckling restrained braced (BRB). Since, the response modification factor depends on ductility and overstrength; the nonlinear static analysis, nonlinear dynamic analysis and linear dynamic analysis have been done on building models including multi-floors and different brace configurations (chevron V, invert V, diagonal and X bracing). The response modification factor for each of the BRBF dual systems has been determined separately, and the tentative value of 10.47 has been suggested for allowable stress design method. It is also included that the ductility, overstrength and response modification factors for all of the models were decreased when the height of the building was increased.
 Keywords
R-factor;ductility and overstrength factors;dual moment resistant frame with BRB;
 Language
English
 Cited by
1.
Response modification factor of the frames braced with reduced yielding segment BRB,;;

Structural Engineering and Mechanics, 2014. vol.50. 1, pp.1-17 crossref(new window)
2.
Structural behavior of conventional and buckling restrained braced frames subjected to near-field ground motions,;;

Earthquakes and Structures, 2014. vol.7. 4, pp.553-570 crossref(new window)
3.
Response modification factor of suspended zipper braced frames,;;

Steel and Composite Structures, 2015. vol.18. 1, pp.165-185 crossref(new window)
1.
Performance-based plastic design method for steel concentric braced frames, International Journal of Advanced Structural Engineering (IJASE), 2015, 7, 3, 281  crossref(new windwow)
2.
Performance-based plastic design method of high-rise steel frames, Journal of Vibroengineering, 2017, 19, 3, 2003  crossref(new windwow)
3.
Hybrid Recentering Energy Dissipative Device for Seismic Protection, Journal of Structures, 2014, 2014, 1  crossref(new windwow)
4.
Response modification factor of suspended zipper braced frames, Steel and Composite Structures, 2015, 18, 1, 165  crossref(new windwow)
5.
Structural behavior of conventional and buckling restrained braced frames subjected to near-field ground motions, Earthquakes and Structures, 2014, 7, 4, 553  crossref(new windwow)
6.
Reliability and fragility curve assessment of steel concentrically braced frames, European Journal of Environmental and Civil Engineering, 2016, 20, 7, 748  crossref(new windwow)
7.
Development of the Performance Based Plastic Design for Steel Concentric Braced Frames and Evaluation by Energy Methodology, Advances in Structural Engineering, 2015, 18, 10, 1619  crossref(new windwow)
8.
Seismic reliability-based ductility demand evaluation for inelastic base-isolated structures with friction pendulum devices, Earthquake Engineering & Structural Dynamics, 2017, 46, 8, 1245  crossref(new windwow)
9.
Seismic behavior of coupled shear wall structures with various concrete and steel coupling beams, The Structural Design of Tall and Special Buildings, 2018, 27, 1, e1405  crossref(new windwow)
10.
Response modification factor of the frames braced with reduced yielding segment BRB, Structural Engineering and Mechanics, 2014, 50, 1, 1  crossref(new windwow)
11.
Strength or force reduction factors for steel buildings: MDOF vs SDOF systems, Journal of Vibroengineering, 2017, 19, 4, 2680  crossref(new windwow)
 References
1.
AISC (2005), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Constructions, Chicago, IL, USA.

2.
Annan, C.D., Youssef, M.A. and El Naggar, M.H. (2009), "Experimental evaluation of the seismic performance of modular steel-braced frames", Eng. Struct., 31(7), 1435-1446. crossref(new window)

3.
Asgarian, B. and Amirhesari, N.A. (2008), A comparison of dynamic nonlinear behavior of ordinary and buckling restrained braced frames subjected to strong ground motion", Struct. Design Tall Special Build., 17(2), 367-386. crossref(new window)

4.
Asgarian, B. and Shokrgozar, H.R. (2009), "BRBF response modification factor", J. Construct. Steel Res., 65(2), 290-298. crossref(new window)

5.
ATC (1995a), A critical review of current approaches to earthquake-Resistant design, ATC-34, Applied Technology Council, Redwood City, CA, pp. 31-36.

6.
ATC (1995b), Structural response modification factors, ATC-19, Applied Technology Council, Redwood City, CA, pp. 5-32.

7.
BHRC (2005), Iranian code of practice for seismic resistance design of buildings: Standard No. 2800, 3rd Ed., Building and Housing Research Center.

8.
Black, C., Makris, N. and Aiken, I. (2002), Component Testing, Stability Analysis and Characterization of Buckling-Restrained Braces, Report of Pacific Earthquake Engineering Research Center, Berkeley, University of California.

9.
Broderick, B.M., Elghazouli, A.Y. and Goggins, J. (2008), "Earthquake testing and response analysis of concentrically-braced sub-frames", J. Construct Steel Res., 64(9), 997-1007. crossref(new window)

10.
Chang, H.Y. and Chiu, C.K. (2011), "Performance assessment of buckling restrained braces", Procedia Eng., 14, 2187-2195 crossref(new window)

11.
Davaran, A. and Hoveidae, N. (2009), "Effect of mid-connection detail on the behavior of X- bracing systems", J. Construct Steel Res., 65(4), 985-990. crossref(new window)

12.
Di Sarno, L. and Manfredi, G. (2010), "Seismic retrofitting with buckling restrained braces: Application to an existing non-ductile RC framed building", Soil Dyn. Earthq Eng., 30(11), 1279-1297 crossref(new window)

13.
DiSarno, L., Elnashai, A.S. and Nethercot, D.A. (2008), "Seismic response of stainless steel braced frames", J. Construct. Steel Res., 64(7-8), 914-925. crossref(new window)

14.
FEMA (2000), Prestandard and commentary for the seismic rehabilitation of building, FEMA-356, Federal Emergency Management Agency, Washington, D.C., MA, USA.

15.
Kalyanaraman, V., Ramachandran, B., Prasad, B.K. and Sridhara, B.N. (2003), "Analytical study of sleeved column buckling resistant braced system", In: SEAOC convention proceedings, 713-720.

16.
Kiggins, S. and Uang, C.M. (2006), "Reducing residual drift of buckling-restrained braced frames as a dual system", J. Eng. Struct., 28(11), 1525-1532. crossref(new window)

17.
Kim, J. and Choi, H. (2005), "Response modification factors of chevron-braced frames", J. Eng. Struct., 27(2), 285-300. crossref(new window)

18.
Kim, J. and Seo, Y. (2004), "Seismic design of low-rise steel frames with buckling-restrained braces", J. Eng. Struct., 26(5), 543-551. crossref(new window)

19.
Lee, K. and Bruneau, M. (2005), "Energy dissipation of compression members in concentrically braced frames: Review of experimental data", J. Struct. Eng., 131(4), 552-559. crossref(new window)

20.
Maheri, M.R. and Akbari, R. (2003), "Seismic behavior factor, R, for steel X-braced and knee-braced RC buildings", J. Eng. Struct., 25(12), 1505-1513. crossref(new window)

21.
Mahmoudi, M. and Zaree, M. (2010), "Evaluating response modification factors of concentrically braced steel frames", J. Construct. Steel Res., 66(10), 1196-1204. crossref(new window)

22.
Mazzolani, F.M. and Piluso, V. (1996), Theory and Design of Seismic Resistant Steel Frames, E & FN Spon, London, UK.

23.
MHUD (2009), Iranian national building code (part 10): Steel Structure Design, Tehran, Iran, Ministry of Housing and Urban Development.

24.
Mitchel, D., Tremblay, R., Karacabeyli, E., Paultre, P., Saatcioglu, M. and Anderson, D. (2003), "Seismic Force Modification Factors for the proposed 2005 edition of the National Building Code of Canada", Can. J. Civil Eng., 30(2), 308-327. crossref(new window)

25.
Moghaddam, H., Hajirasouliha, I. and Doostan, A. (2005), "Optimum seismic design of concentrically braced steel frames concepts and design procedures", J. Construct. Steel Res., 61(2), 151-166. crossref(new window)

26.
Mwafy, A.M. and Elnashai, A.S. (2002), "Calibration of force reduction factors of RC buildings", J. Earthq. Eng., 6(22), 239-273.

27.
Rahai, A.R. and Alinia, M.M. (2008), "Performance evaluation and strengthening of concrete structures with composite bracing members", J. Construct. Build. Mater., 22(10), 2100-2110. crossref(new window)

28.
Rai, D.C. and Goel, S.C. (2003), "Seismic evaluation and upgrading of chevron braced frames", J. Construct. Steel Res., 59(8), 971-994. crossref(new window)

29.
Ravi Kumar, G., Satish Kumar, S.R. and Kalyanaraman, V. (2007), "Behavior of frames with non-buckling bracings under earthquake loading", J. Construct. Steel Res., 63(2), 254-262. crossref(new window)

30.
Sabelli, R., Mahin, S. and Chang, C. (2003), "Seismic demands on steel braced frame buildings with buckling-restrained braces", J. Eng. Struct., 25(5), 655-666. crossref(new window)

31.
SEAOC (2001), Recommended Provision for Buckling-Restrained Braced Frames, Seismology and Structural Committee, Structural Engineers Association of Northern California, San Francisco, CA, USA.

32.
Tsai, K.C., Lai, J.W., Hwang, Y.C., Lin, S.L. and Weng, C.H. (2004a), "Research and application of buckling restrained braces in Taiwan", The 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August, Paper No. 2179.

33.
Tsai, K.C., Weng, Y.T,. Lin, S.L. and Goel, S. (2004b), "Pseudo-dynamic test of a full-scale CFT/BRB frame, part 1: Performance based specimen design", The 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August, Paper No. 750.

34.
Uang, C.M. (1991), "Establishing R (or Rw) and Cd factor for building seismic provision", J. Struct. Eng., 117(1), 19-28. crossref(new window)

35.
Uang C.M. and Nakashima, M. (2003), "Steel buckling-restrained frames", In: Bozorgnia, Y., Bertero, V.V. Editors, Earthquake Engineering: Recent Advances and Applications, CRC Press, publication pending, Chapter 16.