JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Vibration analysis of a pre-stressed laminated composite curved beam
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Vibration analysis of a pre-stressed laminated composite curved beam
Ozturk, Hasan;
 Abstract
In this study, natural frequency analysis of a large deflected cantilever laminated composite beam fixed at both ends, which forms the case of a pre-stressed curved beam, is investigated. The laminated beam is considered to have symmetric and asymmetric lay-ups and the effective flexural modulus of the beam is used in the analysis. In order to obtain the pre-stressed composite curved beam case, an external vertical concentrated load is applied at the free end of a cantilever laminated composite beam and then the loading point of the deflected beam is fixed. The non-linear deflection curve of the flexible beam undergoing large deflection is obtained by the Reversion Method. The curved laminated composite beam is modeled by using the Finite Element Method with a straight-beam element approach. The effects of orientation angle and vertical load on the natural frequency parameter for the first four modes are examined and the results obtained are given in graphics. It has been found that the effect of the load parameter, which forms the curved laminated beam, on the natural frequency parameter, almost disappears after a certain value of the load parameter. This certain value differs for each laminated curved beam and each vibration mode.
 Keywords
large deflection;laminated curved beam;vibration;non-linear deflection;finite element method;
 Language
English
 Cited by
1.
Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory,;;;;;;

Structural Engineering and Mechanics, 2016. vol.57. 4, pp.617-639 crossref(new window)
2.
An efficient shear deformation theory for wave propagation of functionally graded material plates,;;;;;

Structural Engineering and Mechanics, 2016. vol.57. 5, pp.837-859 crossref(new window)
3.
Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory,;;;;

Wind and Structures, 2016. vol.22. 4, pp.429-454 crossref(new window)
4.
A study on natural frequencies and damping ratios of composite beams with holes,;

Steel and Composite Structures, 2016. vol.21. 6, pp.1211-1226 crossref(new window)
1.
Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory, Wind and Structures, 2016, 22, 4, 429  crossref(new windwow)
2.
Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory, Structural Engineering and Mechanics, 2016, 57, 4, 617  crossref(new windwow)
3.
A study on natural frequencies and damping ratios of composite beams with holes, Steel and Composite Structures, 2016, 21, 6, 1211  crossref(new windwow)
4.
An efficient shear deformation theory for wave propagation of functionally graded material plates, Structural Engineering and Mechanics, 2016, 57, 5, 837  crossref(new windwow)
5.
Vibrations of pinned-fixed heterogeneous circular beams pre-loaded by a vertical force at the crown point, Journal of Sound and Vibration, 2017, 393, 92  crossref(new windwow)
 References
1.
Addessi, D., Lacarbonara, W. and Paolone, A. (2005), "On the linear normal modes of planar pre-stressed curved beams", J. Sound Vib., 284(3-5), 1075-1097. crossref(new window)

2.
Agarwal, S., Chakraborty, A. and Gopalakrishnan, S. (2006), "Large deformation analysis for anisotropic and inhomogeneous beams using exact linear static solutions", Compos. Struct., 72(1), 91-104. crossref(new window)

3.
Ang, M.H., Wei, W. and Teck-Seng, L. (1993), "On the estimation of the large deflection of a cantilever beam", Proceedings of the IECON '93 International Conference on Industrial Electronics, Control, and Instrumentation, Maui, HI, USA, November.

4.
Bauchau, O.A. and Hong, C.H. (1988), "Nonlinear composite beam theory", J. Appl. Mech.-T. Asme, 55(1), 156-163. crossref(new window)

5.
Bayat, M., Pakar, I. and Bayat, M. (2013), "On the large amplitude free vibrations of axially loaded Euler-Bernoulli beams", Steel Compos. Struct., Int. J., 14(1), 73-83. crossref(new window)

6.
Belendez, T., Neipp, C. and Belendez, A. (2002), "Large and small deflections of a cantilever beam", Eur. J. Phys., 23(3), 371-379. crossref(new window)

7.
Belendez, T., Neipp, C. and Belendez, A. (2003), "Numerical and experimental analysis of a cantilever beam: a laboratory project to introduce geometric nonlinearity in mechanics of materials", Int. J. Eng. Educ., 19(6), 885-892.

8.
Bisshopp, K.E. and Drucker, D.C. (1945), "Large deflection of cantilever beams", Q. Appl, Math., 3, 272-275. crossref(new window)

9.
Chen, J.K. and Sun, C.T. (1985), "Dynamic large deflection response of composite laminates subjected to impact", Compos. Struct., 4(1), 59-73. crossref(new window)

10.
Chen, L. (2010), "An integral approach for large deflection cantilever beams", Int. J. Nonlin. Mech., 45(3), 301-305. crossref(new window)

11.
Cornil, M.B., Capolungo, L., Qu, J. and Jairazbhoy, V.A. (2007), "Free vibration of a beam subjected to large static deflection", J. Sound Vib., 303(3-5), 723-740. crossref(new window)

12.
Gay, D., Hoa, S.V. and Tsai, S.W. (2003), Composite Materials Design and Applications, CRC press, New York, NY, USA.

13.
Hadji, L., Daouadji, T.H., Tounsi, A. and Bedia, E.A. (2014), "A higher order shear deformation theory for static and free vibration of FGM beam", Steel Compos. Struct., Int. J., 16(5), 507-519. crossref(new window)

14.
Hajianmaleki, M. and Qatu, M.S. (2013), "Vibrations of straight and curved composite beams: A review", Compos. Struct., 100, 218-232. crossref(new window)

15.
Holden, J.T. (1972), "On the finite deflections of thin beams", Int. J. Solids Struct., 8(8), 1051-1055. crossref(new window)

16.
Holland, D.B., Virgin, L.N. and Plaut, R.H. (2008), "Large deflections and vibration of a tapered cantilever pulled at its tip by a cable", J. Sound Vib., 310(1-2), 433-441. crossref(new window)

17.
Jeon, S.M., Cho, M.H. and Lee, I. (1995), "Static and dynamic analysis of composite box beams using large deflection theory", Comput. Struct., 57(4), 635-642. crossref(new window)

18.
Jones, R.M. (1999), Mechanical of Composite Materials, (2nd Edition), Taylor & Francis Inc, USA.

19.
Kant, T. and Kommineni, J.R. (1994), "Large amplitude free vibration analysis of cross-ply composite and sandwich laminates with a refined theory and C0 finite elements", Comput. Struct., 50(1), 123-134. crossref(new window)

20.
Karaagac, C., Ozturk, H. and Sabuncu, M. (2013), "Effects of an edge crack on the free vibration and lateral buckling of a cantilever laminated composite slender beam", J. Vib. Control, 19(16), 2506-2522. crossref(new window)

21.
Khdeir, A.A. and Reddy, J.N. (1994), "Free vibration of cross-ply laminated beams with arbitrary boundary conditions", Int. J. Eng. Sci., 32(12), 1971-1980. crossref(new window)

22.
Kien, N.D. (2013), "Large displacement response of tapered cantilever beams made of axially functionally graded material", Compos. Part B, 55, 298-305. crossref(new window)

23.
Lee, K. (2002), "Large deflections of cantilever beams of non-linear elastic material under a combined loading", Int. J. Nonlin. Mech., 37(3), 439-443. crossref(new window)

24.
Murty, A.V.K. and Shimpi, R.P. (1974), "Vibration of laminated beams", J. Sound Vib., 36(2), 273-284. crossref(new window)

25.
Nallathambi, A.K., Rao, C.L. and Srinivasan, S.M. (2010), "Large deflection of constant curvature cantilever beam under follower load", Int. J. Mech. Sci., 52(3), 440-445. crossref(new window)

26.
Ozturk, H. (2011), "In-plane free vibration of a pre-stressed curved beam obtained from a large deflected cantilever beam", Finite Elem. Anal. Des., 47(3), 229-236. crossref(new window)

27.
Ozturk, H. and Sabuncu, M. (2005) "Stability analysis of a cantilever composite beam on elastics supports", Compos. Sci. Technol., 65(13), 1982-1995. crossref(new window)

28.
Pulngern, T., Chucheepsakul, S. and Halling, M.W. (2005), "Analytical and experimental studies on the large amplitude free vibrations of variable-arc-length beams", J. Vib. Control, 11(7), 923-947. crossref(new window)

29.
Rao, B.N. and Rao, G.V. (1986), "On the large deflection of cantilever beams with end rotational load", ZAMM-Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 66(10), 507-509. crossref(new window)

30.
Rao, K.M., Desai, Y.M. and Chitnis, M.R. (2001), "Free vibrations of laminated beams using mixed theory", Compos. Struct., 52(2), 149-160. crossref(new window)

31.
Reddy, J.N. (1997), Mechanics of Laminated Composite Plates Theory and Analysis, CRS Press, New York, NY, USA.

32.
Rikards, R., Chate, A. and Barkanov, E. (1993), "Finite element analysis of damping the vibrations of laminated composites", Compos. Struct., 47(6), 1005-1015. crossref(new window)

33.
Schmidt, W.F. (1978), "Nonlinear bending of beams using the finite element method", Comput. Struct., 8(1), 153-158. crossref(new window)

34.
Silva, V.D.D. (2006), Mechanics and Strength of Materials, Springer, Berlin, Heidelberg, Germany.

35.
Stemple, A.D. and Lee, S.W. (1989), "A finite element model for composite beams undergoing large deflection with arbitrary cross- sectional warping", Int. J. Numer. Meth. Eng., 28(9), 2143-2160. crossref(new window)

36.
Sun, C.T. and Chin, H. (1988), "On large deflection effects in unsymmetric cross-ply composite laminates", J. Compos. Mater., 22(11), 1045-1059. crossref(new window)

37.
Thomas, D.L. and Wilson, R.R. (1973), "The use of straight beam finite elements for analysis of vibrations of curved beams", J. Sound Vib., 26(1), 155-158. crossref(new window)

38.
Tseng, Y.P., Huang, C.S. and Kao, M.S. (2000), "In-plane vibration of laminated curved beams with variable curvature by dynamic stiffness analysis", Compos. Struct., 50(2), 103-114. crossref(new window)

39.
Upadhyay, P.C. and Lyons, J.S. (2000), "Effect of hygrothermal environment on the bending of PMC laminates under large deflection", J. Reinf. Plast. Compos., 19(6), 465-491. crossref(new window)

40.
Wang, T.M. (1968), "Non-linear bending of beams with concentrated loads", J. Franklin Inst., 285(5), 386-390. crossref(new window)

41.
Wang, T.M. (1969), "Non-linear bending of beams with uniformly distributed loads", Int. J. Nonlin. Mech., 4(4), 389-395. crossref(new window)

42.
Yang, T.Y. (1973), "Matrix displacement solution to elastica problems of beams and frames", Int. J. Solids Struct., 9(7), 829-842. crossref(new window)

43.
Yang, Y.B., Kuo, S.R. and Yau, J.D. (1991), "Use of straight-beam approach to study buckling of curved beams", J. Struct. Eng.-ASCE., 117(7), 1963-1978. crossref(new window)

44.
Zhang, Y., Wang, S. and Petersson, B. (2003), "Large deflection analysis of composite laminates", J. Mater. Process. Technol., 138(1-3), 34-40. crossref(new window)