Advanced SearchSearch Tips
The relationship between time-varying eccentricity of load with the corner lateral displacement response of steel structure during an earthquake
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The relationship between time-varying eccentricity of load with the corner lateral displacement response of steel structure during an earthquake
Takin, Kambiz; Hashemi, Behrokh H.; Nekooei, Masoud;
In an actual design, none of the structures with shear behaviors will be designed for torsional moments. Any failure or damages to roofs, infills, shear walls, and braces caused by an earthquake, will inevitably result in relocation of center of mass and rigidity of the structure. With these changes, the dynamic characteristics of structure could be changed during an earthquake at any moment. The main objective of this paper is to obtain the relationship between time-varying eccentricity of load and corner lateral displacement. In this study, various methods have been used to determine the structural response for time-varying lateral corner displacement. As will be seen below, some of the structural calculation methods result in a significant deviation from the actual results, although these methods include the interaction effects of modes. Controlling the lateral displacement of structure can be performed in different ways such as, passive dampers, friction dampers, semi-active systems including the MR damper and active Systems. Selecting and locating these control systems is very important to bring the maximum safety with minimum cost into the structure. According to this study will be show the relation between the corner lateral displacements of structure and time-varying eccentricity by different kind of methods during an earthquake. This study will show that the response of the structure at the corners due to an earthquake can be very destructive and because of changing the eccentricity of load, calculating the maximum possible response of system can be carried out by this method. Finally, some kind of systems must be used for controlling these displacements. The results shows that, the CQC, DSC and exact methods is comply each other but the results of Vanmark method is not comfortable for these kind of buildings.
torsional modes;shear modes;lateral displacement;eccentricity;earthquake;ABS, SRSS, CQC;vanmark;humar;Gupta and exact methods;
 Cited by
Anastassiadis, K., Athanatopoulos, A. and Makarios, T. (1998), "Equivalent static eccentricities in the simplified methods of seismic analysis of buildings", Earthq. Spectra, 14(1), 1-34. crossref(new window)

Bahmani, P., van de Lindt, J.W. and Dao, T.N. (2014), "Displacement-based design of buildings with torsion: Theory and verification", J. Struct. Eng. (ASCE), 140(6), 04014020.

De la Llera, J.C. and Chopra, A.K. (1994), "Using accidental eccentricity in code-specified static and dynamic analysis of buildings", Earthq. Eng. Struct. Dyn., 23(7), 947-967. crossref(new window)

Dempsey, K.M. and Irvine, H.M. (1979), "Envelopes of maximum seismic response for a partially symmetric single storey building model", Earthq. Eng. Struct. Dyn., 7(2), 161-180. crossref(new window)

Fajfar, P., Marusic, D. and Perus, I. (2005), "Torsional effects in the pushover-based seismic analysis of buildings", J. Earthq. Eng., 9(6), 831-854.

Hosseini, M. and Legzian, Gh. (2011), "Derivation of stiffness and mass matrices of torsional buildings in fully irregular state", 8(3), 125-136.

Kevadkar, M.D. and Kodag, P.B. (2013), "Lateral load analysis of R.C.C. building", Int. J. Modern Eng Res. (IJMER), 3(3), 1428-1434.

Kuo, P.T. (1974), "Torsional effects in structures subjected to dynamic excitations of the ground", Ph.D. Thesis; Rice University, Houston, TX, USA.

Tande, S.M. and Patil, S.J. (2013), "Seismic response of asymmetric buildings", Int. J. Latest Trend. Eng. Technol. (IJLTET), 2(4), 365-369.

Tso, W.K. and Moghadam, A.S. (1998), "Application of Eurocode 8 torsional provisions to multi-storey buildings", Proceedings of the 11th European Conference on Earthquake Engineering, Paris, France, September.