Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam`s shear strength

- Journal title : Steel and Composite Structures
- Volume 21, Issue 3, 2016, pp.679-688
- Publisher : Techno-Press
- DOI : 10.12989/scs.2016.21.3.679

Title & Authors

Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam`s shear strength

Safa, M.; Shariati, M.; Ibrahim, Z.; Toghroli, A.; Baharom, Shahrizan Bin; Nor, Norazman M.; Petkovic, Dalibor;

Safa, M.; Shariati, M.; Ibrahim, Z.; Toghroli, A.; Baharom, Shahrizan Bin; Nor, Norazman M.; Petkovic, Dalibor;

Abstract

Structural design of a composite beam is influenced by two main factors, strength and ductility. For the design to be effective for a composite beam, say an RC slab and a steel I beam, the shear strength of the composite beam and ductility have to carefully estimate with the help of displacements between the two members. In this investigation the shear strengths of steel-concrete composite beams was analyzed based on the respective variable parameters. The methodology used by ANFIS (Adaptive Neuro Fuzzy Inference System) has been adopted for this purpose. The detection of the predominant factors affecting the shear strength steel-concrete composite beam was achieved by use of ANFIS process for variable selection. The results show that concrete compression strength has the highest influence on the shear strength capacity of composite beam.

Keywords

ANFIS;forecasting;steel-concrete composite beam;shear capacity;

Language

English

Cited by

1.

2.

3.

4.

References

1.

Bailey, C., Burgess, I., Plank, R., El-Rimawi, J. and Huang, Z., Bailey, C.G., Lennon, T. and Moore, D.B. (1999), "The behaviour of full-scale steel-framed buildings subjected to compartment fires", The Struct. Eng., 77(8), 15-21.

2.

Dong, Y. and Prasad, K. (2009), "Experimental study on the behavior of full-scale composite steel frames under furnace loading", J. Struct. Eng., 135(10), 1278-1289.

3.

Duan, S., Wang, J., Zhou, Q. and Wang, H. (2010), "An experimental study on double steel-concrete composite beam specimens", In: Challenges, Opportunities and Solutions in Structural Engineering and Construction, Taylor & Francis Group, London, UK, pp. 209-214.

4.

Ekici, B.B. and Aksoy, U.T. (2011), "Prediction of building energy needs in early stage of design by using ANFIS", Expert Syst. Appl., 38(5), 5352-5358.

5.

Hakim, S.J.S., Noorzaei, J., Jaafar, M., Jameel, M. and Mohammadhassani, M. (2011), "Application of artificial neural networks to predict compressive strength of high strength concrete", Int. J. Phys. Sci., 6(5), 975-981.

6.

Inal, M. (2008), "Determination of dielectric properties of insulator materials by means of ANFIS: a comparative study", J. Mater. Process. Technol., 195(1), 34-43.

7.

Jang, J.-S. (1993), "ANFIS: Adaptive-network-based fuzzy inference system", IEEE Transactions on Systems, Man and Cybernetics, 23(3), 665-685.

8.

Khajeh, A., Modarress, H. and Rezaee, B. (2009), "Application of adaptive neuro-fuzzy inference system for solubility prediction of carbon dioxide in polymers", Expert Syst. Appl., 36(3), 5728-5732.

9.

Kurnaz, S., Cetin, O. and Kaynak, O. (2010), "Adaptive neuro-fuzzy inference system based autonomous flight control of unmanned air vehicles", Expert Syst. Appl., 37(2), 1229-1234.

10.

Liew, R.J.Y. and Xiong, D.X. (2009), "Effect of preload on the axial capacity of concrete-filled composite columns", J. Construct. Steel Res., 65(3), 709-722.

11.

Lo, S.-P. and Lin, Y.-Y. (2005), "The prediction of wafer surface non-uniformity using FEM and ANFIS in the chemical mechanical polishing process", Journal of Materials Processing Technology, 168(2), 250-257.

12.

Maleki, S. and Bagheri, S. (2008), "Behavior of channel shear connectors, Part I: Experimental study", J. Construct. Steel Res., 64(12), 1333-1340.

13.

Maleki, S. and Mahoutian, M. (2009), "Experimental and analytical study on channel shear connectors in fiber-reinforced concrete", J. Construct. Steel Res., 65(8-9), 1787-1793.

14.

Michels, J., Martinelli, E., Czaderski, C. and Motavalli, M. (2014), "Prestressed CFRP strips with gradient anchorage for structural concrete retrofitting: Experiments and numerical modeling", Polymers, 6(1), 114-131.

15.

Mohammadhassani, M., Nezamabadi-Pour, H., Jameel, M. and Garmasiri, K. (2013), "Applications of the ANFIS and LR in the prediction of strain in tie section of concrete deep beams", Comput. Concrete, 12(3), 243-259.

16.

Mohammadhassani, M., Nezamabadi-Pour, J., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868.

17.

Mohammadhassani, M., Nezamabadi-Pour, M., Suhatril, M. and Shariati, M. (2014a), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809.

18.

Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848.

19.

Petkovic, D., Issa, M., Pavlovic, N.D., Zentner, L. and Cojbasic, Z. (2012), "Adaptive neuro fuzzy controller for adaptive compliant robotic gripper", Expert Syst. Appl., 39(18), 13295-13304.

20.

Prakash, A., Anandavalli, N., Madheswaran, C. and Lakshmanan, N. (2012), "Modified push-out tests for determining shear strength and stiffness of HSS stud connector-experimental study", Int. J. Compos. Mater., 2(3), 22-31.

21.

Queiroz, F., Vellasco, P. and Nethercot, D. (2007), "Finite element modelling of composite beams with full and partial shear connection", J. Construct. Steel Res., 63(4), 505-521.

22.

Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.

23.

Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011a), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea, September.

24.

Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011b), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983.

25.

Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011c), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307.

26.

Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011d), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essays, 6(1), 213-220.

27.

Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012a), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331.

28.

Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012b), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831.

29.

Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012c), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890.

30.

Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012d), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.

31.

Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012e), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73.

32.

Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Construct. Build. Mater., 38, 582-593.

33.

Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Construct. Build. Mater., 52, 276-283.

34.

Slutter, R.G. (1963), "Pushout tests of welded stud shear connectors in lightweight concrete", Report No. 200.63.409.1; Fritz Engineering Laboratory, Lehigh University, Bethlehem, PA, USA.

35.

Tian, L. and Collins, C. (2005), "Adaptive neuro-fuzzy control of a flexible manipulator", Mechatronics, 15(10), 1305-1320.

36.

Toghroli, A., Mohammadhassani, M., Shariati, M., Suhatril, M., Ibrahim, Z. and Ramli Sulong, N.H. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639.

37.

Viest, I.M., Siessr, C.P., Appleton, J.H. and Newmark, N.M. (1952), "Full scale test of channel shear connectors and composite T-beams", Bulletin Series No. 405.