Advanced SearchSearch Tips
Compensation of temperature effect on impedance responses of PZT interface for prestress-loss monitoring in PSC girders
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Smart Structures and Systems
  • Volume 17, Issue 6,  2016, pp.881-901
  • Publisher : Techno-Press
  • DOI : 10.12989/sss.2016.17.6.881
 Title & Authors
Compensation of temperature effect on impedance responses of PZT interface for prestress-loss monitoring in PSC girders
Huynh, Thanh-Canh; Kim, Jeong-Tae;
In this study, a method to compensate the effect of temperature variation on impedance responses which are used for prestress-loss monitoring in prestressed concrete (PSC) girders is presented. Firstly, an impedance-based technique using a mountable lead-zirconate-titanate (PZT) interface is presented for prestress-loss monitoring in the local tendon-anchorage member. Secondly, a cross-correlation-based algorithm to compensate the effect of temperature variation in the impedance signatures is outlined. Thirdly, lab-scale experiments are performed on a PSC girder instrumented with a mountable PZT interface at the tendon-anchorage. A series of temperature variation and prestress-loss events are simulated for the lab-scale PSC girder. Finally, the feasibility of the proposed method is experimentally verified for prestress-loss monitoring in the PSC girder under temperature-varying conditions and prestress-loss events.
impedance monitoring;mountable PZT interface;prestress force monitoring;tendon-anchorage;PSC girders;temperature effect;temperature compensation;
 Cited by
Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage, Smart Materials and Structures, 2017, 26, 12, 125004  crossref(new windwow)
Fabricio, G.B., Danilo, E.B., Vinicius, A.D.A. and Jose, A.C.U. (2014), "An experimental study on the effect of temperature on piezoelectric sensors for impedance-based structural health monitoring", Sensors, 14, 1208-1227. crossref(new window)

Fasel, T.R., Sohn, H., Park, G. and Farrar, C.R. (2005), "Active sensing using impedance-based ARX models and extreme value statistics for damage detection", Earthq. Eng. Struct. D., 34(7), 763-785. crossref(new window)

Ho, D.D., Lee, P.Y., Nguyen, K.D., Hong, D.S., Lee, S.Y., Kim, J.T., Shin, S.W., Yun, C.B. and Shinozuka, M. (2012), "Solar-powered multi-scale sensor node on imote2 platform for hybrid SHM in cable-stayed bridge", Smart Struct. Syst., 9(2), 145-164. crossref(new window)

Hong, D.S. (2011), Vibration-impedance-based hybrid structural health monitoring and temperature effect assessment in girder's structures, PhD Thesis, Department of Ocean Engineering, Pukyong National University, Korea.

Huynh, T.C. and Kim, J.T. (2014), "Impedance-based cable force monitoring in tendon-anchorage using portable PZT-interface technique", Math. Probl. Eng., Article ID 784731, 1-11.

Huynh, T.C., Park, Y.H., Park, J.H. and Kim, J.T. (2015a), "Feasibility verification of mountable PZT-interface for impedance monitoring in tendon-anchorage", J. Shock Vib., 2015, 1-11.

Huynh, T.C., Lee, K.S. and Kim, J.T. (2015b), "Local dynamic characteristics of PZT impedance interface on tendon anchorage under prestress force variation", Smart Struct. Syst., 15(2), 375-393. crossref(new window)

Huynh, T.C., Park, Y.H., Park, J.H., Hong, D.S., and Kim, J.T. (2015c), "Effect of temperature variation on vibration monitoring of prestressed concrete structures", J. Shock Vib., 2015, 1-9.

Huynh, T.C., Park, J.H. and Kim, J.T. (2016), "Structural identification of cable-stayed bridge under back-to-back typhoons by wireless vibration monitoring", Measurement, 10.1016/j.measurement.2016.03.032. crossref(new window)

Huynh, T.C. and Kim, J.T. (2016), "FOS-based prestress force monitoring and temperature effect estimation in unbonded tendons of PSC girders", J. Aerospace Eng., 10.1061/(ASCE)AS.1943-5525.0000608, B4016005. crossref(new window)

Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27, 1715-1725. crossref(new window)

Koo, K.Y, Park, S.H., Lee, J.J. and Yun, C.B. (2009), "Automated impedance-based structural health monitoring incorporating effective frequency shift for compensating temperature effects", J. Intel. Mat. Syst. Str., 20, 367-377. crossref(new window)

Kim, J.T., Huynh, T.C. and Lee, S.Y. (2014), "Wireless structural health monitoring of stay cables under two consecutive typhoons", Struct. Monit. Maint., 1(1), 47-67.

Kim, J.T., Nguyen, K.D. and Huynh, T.C. (2013), "Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique", Smart Struct. Syst., 12(3-4), 381-379. crossref(new window)

Kim, J.T., Na, W.B., Park, J.H. and Hong, D.S. (2006), "Hybrid health monitoring of structural joints using modal parameters and EMI signatures", Proceeding of SPIE, San Diego, USA.

Kim, J.T., Park, J.H., Hong, D.S. and Park, W.S. (2010), "Hybrid health monitoring of prestressed concrete girder bridges by sequential vibration-impedance approaches", Eng. Struct., 32, 115-128. crossref(new window)

Kim, J.T., Yun, C.B. and Yi, J.H. (2003), "Temperature effects on frequency-based damage detection in plate-girder bridges", J. KSCE, 7(6), 725-733.

Li, H.N, Yi, T.H., Ren L., Li, D.S. and Huo, L.S. (2014), "Review on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1), 1-45.

Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electro-mechanical analysis of adaptive material - Determination of the actuator power consumption and system energy transfer", J. Intel. Mat. Syst. Str., 5, 12-20. crossref(new window)

Lynch, J.P., Wang, W., Loh, K.J., Yi, J.H. and Yun, C.B. (2006), "Performance monitoring of the Geumdang Bridge using a dense network of high-resolution wireless sensors", Smart Mater. Struct., 15(6), 1561-1575. crossref(new window)

Mascarenas, D.L., Todd, M.D., Park, G. and Farrar, C.R. (2007), "Development of an impedance-based wireless sensor node for structural health monitoring", Smart Mater. Struct., 16(6), 2137-2145. crossref(new window)

Min, J.Y. (2012), Structural health monitoring for civil infrastructure using wireless impedance sensor nodes and smart assessment techniques, PhD Thesis, Department of Civil and Environmental Engineering, KAIST, Korea.

Nguyen, K.D. and Kim, J.T. (2012), "Smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon-anchorage connection", Smart Struct. Syst., 9(6), 489-504. crossref(new window)

Park, J.H., Kim, J.T., Hong, D.S., Mascarenas, D. and Lynch, J.P. (2010), "Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements", Smart Struct. Syst., 6(5-6), 711-730. crossref(new window)

Park, J.H., Huynh, T.C. and Kim, J.T. (2015), "Temperature effect on wireless impedance monitoring in tendon anchorage of prestressed concrete girder", Smart Struct. Syst., 15(4), 1159-1175. crossref(new window)

Park, G., Kabeya, K., Cudney, H. and Inman, D. (1999), "Impedance-based structural health monitoring for temperature varying applications", JSME Int. J. Ser. A Solid Mech. Mater. Eng., 42, 249-258.

Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer, Jr, B.F., Agha, G. and Fujino, Y. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(5-6), 423-438. crossref(new window)

Sepehry, N., Shamshirsaz, M. and Abdollahi, F. (2011), "Temperature variation effect compensation in impedance-based structural health monitoring using neural networks", J. Intel. Mat. Syst. Str., 20(10), 1-8.

Siebel, T. and Lilov, M. (2013), "Experimental investigation on improving electromechanical impedance based damage detection by temperature compensation", Key Eng. Mater., 569-570, 1132-1139. crossref(new window)

Sohn, H. (2007), "Effects of environmental and operational variability on structural health monitoring", Philos. T. R. Soc. A, 365, 539-560. crossref(new window)

Sun, F.P., Chaudhry Z., Liang, C. and Rogers C.A. (1995), "Truss structure integrity identification using PZT sensor-actuator", J. Intel. Mat. Syst. Str., 6, 134-139. crossref(new window)

Yun, C., Cho, S., Park, H., Min, J. and Park, J. (2013), "Smart wireless sensing and assessment for civil infrastructure", Struct. Infrastruct. Eng. Maint. Manag. Life-Cycle Design Perform., 10(4), 534-550.

Zagrai, A.N. and Giurgiutiu, V. (2001), "Electro-mechanical impedance method for crack detection in thin plates", J. Intel. Mat. Syst. Str., 12, 709-718. crossref(new window)