JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effects on the Joining Condition of TiAl Alloy and SCM440 by Servo Motor Type Friction Welding
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effects on the Joining Condition of TiAl Alloy and SCM440 by Servo Motor Type Friction Welding
Park, Jong-Moon; Kim, Ki-Young; Kim, Kyoung-Kyun; Oh, Myung-Hoon;
  PDF(new window)
 Abstract
In this study, characteristics of TiAl alloy and SCM440 (Cr-Mo steel) have been investigated with the various joining condition by servo motor type friction welder. The experimental factors of friction welder used in this study are spindle revolution, friction speed, and distance, upset speed and distance, respectively. Servo motor type friction welder could be controlled by the level of oil pressure, and it could be performed by position control dependence of electrical energy. Mechanical properties and morphology of welded interface were characterized by various joining condition. This aroused due to the bond strength dependence on friction heat and size of the heat affected zone. Therefore, it is necessary to have enough friction heat and decreased heat affected zone for good friction welding between dissimilar metals. An optimum bond was obtained between TiAl alloy and SCM440 by controlling friction speed and distance. At the spindle revolution 4,000 rpm, friction speed 120 mm/min, friction distance 15 mm, the bond strength was found to be 312 MPa.
 Keywords
TiAl alloy;SCM440;Servo-motor type friction welding;Joining factors;
 Language
Korean
 Cited by
 References
1.
M. H. Oh, S. H. Hwang, S. N. Choi, I. S. Kim and S. J. Kim : J. Advanced Materials (KNUT). 2 (1995) 7.

2.
T. Noda : Intermetallics. 6 (1998) 709. crossref(new window)

3.
P. He, J. C. Feng, B. G. Zhang and Y. Y. Qian : Materials Characterization. 48 (2002) 401. crossref(new window)

4.
G. X. Luo, G. Q. Wu, Z. Huang and Z. J. Ruan : Scripta Materialia. 57 (2007) 521. crossref(new window)

5.
H. Li, H. Wei, P. He, T. Lin, J. Feng and Y. Huang : Intermetallics. 34 (2013) 69. crossref(new window)

6.
T. Noda, T. Shimizu, M. Okabe and T. MIikubo : Materials Science and Engineering. A239-240 (1997) 613.

7.
W. B. Lee, Y. J. Kim and S. B. Jung : Intermetallics. 12 (2004) 671. crossref(new window)

8.
R. Kumar and M. Balasubramanian : Defence Technology. 11 (2015) 65. crossref(new window)

9.
이영호, 이규천, 최신접합공학, 인터비전 (2008) 77.

10.
S. T. Selvanmani, K. Palanikumar, K. Umanath and D. Jayaperumal : Materials and Design. 65 (2015) 652. crossref(new window)

11.
P. Li, J. Li, M. Salman, L. Liang, J. Xiong and F. Zhang : Materials and Design 56 (2014) 649. crossref(new window)

12.
M. Hazra, K. S. Rao and G. M. Reddy : J. Materials technol 3(1) (2014) 90. crossref(new window)

13.
H. G. Dong, L. Z. Yu, H. M. Gao, D. W. Deng, W. L. Zhou and C. Dong : Trans. Nonferrous Met. Soc. China 24 (2014) 3126. crossref(new window)

14.
Y. S. Kong and S. J. Kim : J. of the Korean Society of Mechanical Engineers, 30(4) (2006) 402. crossref(new window)

15.
K. S. Koo : J. of the Korean Society of Manufacturing Technology Engineers 21(6) (2012) 932. crossref(new window)

16.
M. Takuya and H. Haruki : J. Japan Inst. Matals, 58(2) 1994 215. crossref(new window)

17.
W. B. Lee, M. G. Kim and J. M. Koo : J. of Materials Science 39 (2004) 1125. crossref(new window)

18.
Y. T. Lee, H. D. Lee and S. K. Oh : J of Korean Welding and Joining Society 1 (1995) 110.

19.
S. G. Lee, B. H. Min, S. H. Choi, D. K. Shim and T. K. Min : J of Korean Welding and Joining Society, 25(6) (2007) 53. crossref(new window)

20.
M. Karadge, M. Preuss, C. Lovell, P. J. Withers and S. Bray : Materials Science and Engineering A 459 (2007) 182. crossref(new window)

21.
M. B. Uday and M. N. Ahmad-Fauzi : Materilals and Design. 59 (2014) 76. crossref(new window)

22.
H. Cho and S. Suh : J of Korean Welding and Joining Society, 15(6) (1997) 78.

23.
Y. C. Kim and J. U. Park : J of Korean Welding and Joining Society, 18(5) (2000) 84.

24.
L. Zhou, H. J. Liu and Q. W. Liu : Materials and Design 31 (2010) 2631. crossref(new window)

25.
S. Celik and I. Ersozlu : Materials and Design. 30 (2009) 970. crossref(new window)