Advanced SearchSearch Tips
Numerical study on the thermal-hydraulic safety of the fuel assembly in the Mast assembly
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of Energy Engineering
  • Volume 24, Issue 1,  2015, pp.149-163
  • Publisher : The Korea Society for Energy Engineering
  • DOI : 10.5855/ENERGY.2015.24.1.149
 Title & Authors
Numerical study on the thermal-hydraulic safety of the fuel assembly in the Mast assembly
Kim, YoungSoo; Yun, ByongJo; Kim, HuiYung; Jeon, JaeYeong;
  PDF(new window)
In this study, we conducted study on the confirmation of thermal-hydraulic safety for Mast assembly with Computational Fluid Dynamics(CFD) analysis. Before performing the natural convection analysis for the Mast assembly by using CFD code, we validated the CFD code against two benchmark natural convection data for the evaluation of turbulence models and confirmation of its applicability to the natural convection flow. From the first benchmark test which was performed by Betts et al. in the simple rectangular channel, we selected standard k-omega turbulence model for natural convection. And then, calculation performance of CFD code was also investigated in the sub-channel of rod bundle by comparing with PNL(Pacific Northwest Laboratory) experimental data and prediction results by MATRA and Fluent 12.0 which were performed by Kwon et al.. Finally, we performed main natural convection analysis for fuel assembly inside the Mast assembly by using validated turbulence model. From the calculation, we observed stable natural circulation flow between the mast assembly and pool side and evaluated the thermal-hydraulic safety by calculating the departure from nucleate boiling ratio.
Mast assembly;Fuel assembly;Computational Fluid Dynamics;Natural convection;Departure from Nucleate Boiling Ratio(DNBR);
 Cited by
POWER MnC Co., Ltd, "핵연료 재장전용 마스터 집합체 및 통합이송계통 개발", p.34, (2010)

S.H. Ryu, "Cooling and purification system for spent fuel storage", Safety Review Guidelines for Light Water Reactors, Chap.9.1.3, 9-10 (2009)

John R. Lamarsh, and Anthony J. Baratta, "Introduction to Nuclear Engineering Third Edition", Peason, p. 451 (2012)

Betts, P. L., and I. H. Bokhari. "Experiments on turbulent natural convection in an enclosed tall cavity." International Journal of Heat and Fluid Flow, 21.6, 675-683 (2000) crossref(new window)

Lien, F. S., W. L. Chen, and M. A. Leschziner. "Low-Reynolds-number eddy-viscosity modelling based on non-linear stress-strain/vorticity relations." Engineering turbulence modelling and experiments, 3, 91-100 (1996)

CD-adapco, 2014, "Using K-Epsilon Turbulence", STAR-CCM+ User guide 9.02, 3392-3396

Versteeg, Henk Kaarle, and Weeratunge Malalasekera. An introduction to computational fluid dynamics: the finite volume method. Pearson Education, (2007)

Wilcox, David C. Turbulence modeling for CFD. Vol. 2. La Canada, CA: DCW industries, (1998)

Hyuk Kwon, et. al., "Computations of Transient Natural Circulation on PNL 2 by 6 Test Bundle Experiments." KAERI(Korea Atomic Energy Reserach Instititute)

J. M. Bates, E. U. Khan, Investigation of combined free and forced convection in a 2 x 6 rod bundle during controlled flow transients, PNL-3135, Richland, Washington, Pacific Northwest Laboratory, (1980)

Neil E. Todreas and Mujid S. Kazimi, 1990, Nuclear Systems 1, Taylor & Francis, New York, 66-67

Neil E. Todreas and Mujid S. Kazimi, 1990, Nuclear Systems 1, Taylor & Francis, New York, 19-27

Groeneveld, D.C., Leung, L. K. H., Kirillov, P. I., Bobkov, V. P., Smogalev, I. P., Vinogradov, V. N., Huang, X. C., and Royer, E. "The 1995 look-up table for critical heat flux in tubes, Nucl. Eng. Design, 163, 1-23 (1996) crossref(new window)