JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Convergence Technique Study of Model Tie Rod End by Configuration through Simulation Analysis
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Convergence Technique Study of Model Tie Rod End by Configuration through Simulation Analysis
Lee, Jung-Ho; Cho, Jae-Ung;
  PDF(new window)
 Abstract
Deformation, stress and fatigue life due to the configuration of tie rod end are investigated in this study. Tie rod ends with the total three kinds of configurations are modelled with three dimensions through CATIA program and the simulation analysis is carried out with the ANSYS finite element analysis program. There are the models of A, B and C by the configuration of the rod end. As this study result, maximum deformation, maximum equivalent stress and maximum fatigue life of A type model are shown to be 0.0614mm, 160.27MPa and 336,930cycles respectively. And maximum deformation, maximum equivalent stress and maximum fatigue life of B type model are shown to be 0.0648mm, 90.889MPa and 1,171,000cycles respectively. Maximum deformation, maximum equivalent stree and maximum fatigue life of C type model are also shown to be 0.0402mm, 84.794MPa and 20,000,000cycles respectively. The durability of the models of tie rod ends through the values of this result could be estimated and the data for the design and development of more improved tie rod end could be secured. And it is possible to be grafted onto the convergence technique at design and be shown as the esthetic sense.
 Keywords
Tie rod end;Configuration;Structural analysis;Fatigue analysis;Durability;Convergence technique;
 Language
Korean
 Cited by
 References
1.
C. Z. Jin, K. K. Jin, S. K. Ha, H. S. Seo, I. S. Yoon, "Structure Analysis and Design Optimization of Stiffeners in LNG Tanks", Journal of the Korean Society of Mechanical Engineers, Vol. 36, No. 3, pp. 325-330, 2012.

2.
S. S. Kang. J. H. Lee, "Evaluation of Fatigue Life and Structural Analysis for Dish-Type and Spoke-Type Automobile Wheels", Journal of the Korean Society of Mechanical Engineers, Vol. 35, No. 10, pp. 1315-1321, 2011. crossref(new window)

3.
D. H. Choi, K. H. Lee, "Structural Analysis and Optimization of a Pedestal for Deck Crane", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 95-100, 2012.

4.
Y. J. Jang, J. H. Lee, K. W. Kang, "Structural Integrity of Small Wind Turbine Composite Blade Using Structural Test and Finite Element Analysis", Journal of the Korean Society Mechanical Engineers, Vol. 36, No. 9, pp. 1087-1094, 2012. crossref(new window)

5.
M. S. Han, J. U. Cho, "Structural Analysis on Flange Coupling due to Change of Bolt Numbers", Journal of the Korean Society Manufacturing Process Engineers, Vol. 12, No. 5, pp. 57-66, 2013.

6.
J. S. Moon, J. W. Kim, J. C. Shin, M. S. Kim, "Reliability Estimation of Door Hinge for Home Appliances", Journal of the Korean Society of Mechanical Engineers, Vol. 29, No. 5, pp. 689-697, 2005. crossref(new window)

7.
J. U. Cho, M. S. Han, "Structural Durability Analysis Related to Shape and Direction of Bicycle Frames", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 6, No. 22, pp. 969-975, 2013.

8.
H. K. Choi, J. U. Cho, "Structural Analysis on the Fracture of Bonded Double Cantilever Beam Model", Jou. of Korean Society of Mechanical Technology, Vol. 14, No. 4, pp. 41-47, 2012.

9.
H. J. Jung, "The Analysis of Data on the basis of Software Test Data", Journal of Digital Convergence, Vol. 13, No. 10, pp. 1-7, 2015.

10.
Y. H. Cho, "Manufacturing convergence simulation system effect for the degree of perfection improvement of the new product", Journal of Digital Convergence, Vol. 13, No. 6, pp. 91-103, 2015.

11.
W. B. Lee, W. Y. Hao, B. P. Kyung, S. H. Ryu, "Dismantling Simulation of Nuclear Reactor Using Par tial Mesh Cutting Method for 3D Model", Journal of Digital Convergence, Vol. 13, No. 4, pp. 303-310, 2015.

12.
Y. C. Lim, H. S. Yang, "A Design of a Context-Aware System in Solar Cell Equipment with the use of Multi-sensor", Journal of Digital Convergence, Vol. 12, No. 11, pp. 265-272, 2014.

13.
B. H. Kim, J. H. Um, R. G. Jeong, Y. S. Byun, S. W. Kang, "Development of an Operation Control System of the Vertical Transferable Korean Personal Rapid Transit", Journal of Digital Convergence, Vol. 12, No. 10, pp. 337-343, 2014.

14.
J. H. Lee, J. U. Cho, "Convergence Technique Study through CAE due to the Shape of Lift for Car", Journal of the Korea Convergence Society, Vol. 6, No. 5, pp. 49-54, 2015.

15.
J. H. Lee, J. U. Cho, "Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis", Journal of the Korea Convergence Society, Vol. 6, No. 4, pp. 99-104, 2015.