JOURNAL BROWSE
Search
Advanced SearchSearch Tips
No-Failure Accelerated Life Test of Flap Actuating System using Weibull Distribution
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
No-Failure Accelerated Life Test of Flap Actuating System using Weibull Distribution
Cho, Hyunjun; Lee, Inho; Kim, Sangbeom; Park, Sangjoon; Yang, Myungseok;
  PDF(new window)
 Abstract
In this paper, we present some results on No-failure accelerated life test of aerial vehicle for reliability demonstration. The design of general accelerated life test consists of the three phases: 1) Estimating normal life test time of a single product from Weibull distribution model; 2) Determining the acceleration factor (AF) by utilizing the relation between the life of mechanical components and the applied torque; 3) Calculating the accelerated life test time, which comes from dividing the estimated normal life test time into AF. Then, we applied the calculated life test time to the real reliability test of the flap actuating system, while considering the requirement specification for mechanical components and operating environment of the actuation system. Real experimental processes and results are presented to validate the theory.
 Keywords
reliability;Weibull distribution;accelerated life test;acceleration factor;no-failure;MTBF;airplane;flap actuating system;
 Language
Korean
 Cited by
 References
1.
KATS, "Reliability Terms Handbook", pp. 43-101, Korean Agency for Technology and Standards, Seoul, 2003.

2.
R. B. Abernethy, "The New Weibull Handbook", 5th Ed., Mohmehr, 2006.

3.
Y. Kwon, "The Effect of Shape Parameters in Designing Reliability Qualification Test for Weibull lifetime distribution", Journal of Applied Reliability, Vol. 11, No. 3, pp. 225-234, 2011.

4.
G. Lee, H. Kim, and B. Kang, "Development of accelerated life test method for mechanical components using Weibull-IPL(Inverse Power Law) model", Proc. of the KSME Spring Conference 2003, pp. 445-450, 2003.

5.
S. Lee and H. Kim, "No-Failure Test Times of Hydraulic System Components for the Life Test", Proc. of the KSME Fall Conference 2006, pp. 7-12, 2006.

6.
D. Kim and Y. Kang, "Case Study of Accelerated Life Test Method for Agricultural Tractor Transmission", Journal of Biosystems Engineering, Vol. 34, No. 5 pp. 325-330, Oct. 2009. crossref(new window)

7.
D. Kim and H. Kim, "Accelerated Life Test for Fluid Power Components", Journal of the Korea Fluid Power Systems Society, Vol. 7, No. 1 pp. 9-15, Mar. 2010.

8.
Y. Kim, S. Kim, H. Kim, and H. Mok, "Accelerated Life Test of In-Wheel Motor for Mobile Robot", Proc. of the Korean Institute of Power Electronics Annual Conference 2009, pp. 498-505, 2009.

9.
B. Yi, S. Yoo, and W. Lee, "Accelerated Life Test and Safety Assessment of Airbone Starter-Generator", KARI, Aerospace Engineering and Technology, Vol. 6, No. 2, pp. 229-235, Nov. 2007.

10.
M. Shin, S. Wei, and H. Kim, "Comparison to Automobile Pilot Lamp by Accelerated Life Test", Journal of Applied Reliability, Vol. 8, No. 2, pp. 75-85, June 2008.

11.
H. Cha, Y. Park, J. Kim, Y. Son, S. Chang, and K. Kwack, "Mechanical Lifetime Estimation of A Relay using Accelerated Life Testing", Proc. of the KSME Fall Conference 2007, pp. 1-6, 2007.

12.
K. Lee and W. Yun, "Accelerated Life Test Design for Vacuum Cleaner Motors", Journal of Applied Reliability, Vol. 9, No. 1, pp. 47-58, Mar. 2009.

13.
J. Jo, N. Mun, K. Lee, I. Han, J. Kim, and H. Kim, "Estimation of Exhaust Pipe Lifetime Through Accelerated Life Test", Pro. of the KSAE Annual Conference 2012, pp. 753-758, 2012.

14.
M. Kim, Y. Park, J. Lee, and J. Park, "Fatigue Life Estimation for Flaperon Joint of Tilt-Rotor UAV", Journal of Aerospace System Engineering, Vol. 3, No. 2, pp. 12-19, June 2009.

15.
W. Sim, E. Park, K. Kim, Y. Kim, S. Park, and J. Roh, Journal of Aerospace System Engineering, "Design of flap devices driven by SMA spring actuators", Vol. 4, No. 4, pp. 11-17, Dec. 2010.

16.
H. Cho, H. Kim, S. Kim, S. Park, and M. Yang, "No-Failure Accelerated Life Test Time for Airborne Drive System", Proc. of the SASE Fall Conference 2015, pp. 304-309, 2015.

17.
H. P. Bloch and F. K. Geitner, "An Introduction to Machinery Reliability Assessment", 2nd Ed., Motor City Books, 1994.

18.
H. P. Bloch and F. K. Geitner, "Practical Machinery Management for Process Plants Volume2: Machinery Failure Analysis and Troubleshooting", 2nd Ed., Gulf Publishing Corp, 1994.

19.
International Organization for Standardization, "Calculation of Load Capacity of Spur and Helical Gears - Part 6: Calculation of service life under variable load", ISO/DIS 6336-6. 2004.

20.
Defense Acquisition Program Administration, "무기체계 시험평가 실무 가이드북", Publication registration number: 11-1690000-001479-01, 2013.