JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Study on Flow Characteristics of Spark-Ignited Engine with Variable Intake Valve Closing Timing for Miller Cycle
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of ILASS-Korea
  • Volume 21, Issue 1,  2016, pp.7-12
  • Publisher : Institute for Liquid Atomization and Spray Systems-Korea
  • DOI : 10.15435/JILASSKR.2016.21.1.7
 Title & Authors
A Study on Flow Characteristics of Spark-Ignited Engine with Variable Intake Valve Closing Timing for Miller Cycle
Chung, J.H.; Kang, S.J.; Kim, J.S.; Jeong, S.C.; Lee, J.W.;
  PDF(new window)
 Abstract
In this study, to research in-cylinder flow characteristics of spark-ignited engine with intake valve closing timing change for Miller cycle. 3D simulation study were used 6 different intake valve profile with gap for retard intake valve closing timing. Comparison of In-cylinder flow pattern characteristic were accompanied between Base and LIVC. And the efficiency of volume and the work of compression were analyzed with simulation study. When intake valve closing angle was retarded in , the pressure in cylinder was decreased about 12~13 bar and volume efficiency was reduced about 16%. The efficiency of volume and the work of compression were reduced on LIVC.
 Keywords
Miller cycle;Atkinson cycle;Variable valve timing;Intake valve closing angle;
 Language
Korean
 Cited by
 References
1.
Yunlong Li and Yiqiang Pei, Jing Qin, Shaozhe Zhang, Yu Shang, Le Yang, and Xuesong Wu, "Exhaust Gas Recirculation, Late Intake Valve Closure and High Compression Ratio for Fuel Economy Improvement in a MPI Gasoline Engine", SAE Technical Paper 2014-01-1197, 2014.

2.
Sangmyeong Kim, Gisu Sung and Jinwook Lee, "Analysis of In-cylinder Flow in a Miller Cycle Engine with Variable IVC for HEV", Journal of ILASS-Korea, Vol. 19, No. 1, 2014, pp. 25-32. crossref(new window)

3.
Yu Wan and Aimin Du, "Reducing Part Load Pumping Loss and Improving Thermal Efficiency through High Compression Ratio Over-Expanded Cycle", SAE Technical Paper 2013-01-1744, 2013.

4.
James Taylor and Neil Fraser, Rene Dingelstady and Hermann Hoffmann, "Benefits of Late Inlet Valve Timing Strategies Afforded Through the Use of Intake Cam In Cam Applied to a Gasoline Turbocharged Downsized Engine", SAE Technical Paper 2011-01-0360, 2011.

5.
Hyundai Motor, "2012 YF Sonata Hybrid Maintenance Instructions", Golden bell, 2011, pp. 5-8.

6.
H. S. Kim, "Performance and Emission Characteristics of a Controlled Auto-Ignition Gasoline Engine according to Variation", Soongsil University Graduate school, 2003, pp. 12-21.

7.
Yutaka Murata, Jin Kusaka, Yasuhiro Daisho, "Miller-PCCI Combustion in a HSDI Diesel Engine with VVT", SAE 2008-01-0644, 2008.

8.
Yong-Seok Cho, Seang-Wock Lee, Ik-Kyoo Jang, Jungkwon Park, Yu-bin Yoon, Young-Joon Park, Hyunchul Kim, Byung-chul Na, "Numerical Analysis for Prediction of the Residual Gas Fraction, Volumetric Efficiency and Pumping Loss with Continuous Variable Valve Lift System in an SI Engine", KSAE Vol. 18, 2010, pp.7-13.