Literature Review on the Statistical Quality Control in Journal of the KSQM for 50 Years

Title & Authors
Literature Review on the Statistical Quality Control in Journal of the KSQM for 50 Years
Kwon, Hyuck Moo; Hong, Sung Hoon; Lee, Min Koo; Lim, Sung Uk;

Abstract
Purpose: This paper reviews the papers on statistical quality control issues which are published in Journal of the Korean Society for Quality Management (KSQM) since 1965. The literature review is purposed to survey a variety of statistical quality control issues. Methods: By grouping all of statistical quality control issues into 3 categories:; quality inspections, control charts, and process capability analysis. Results: Grouping all of papers on statistical quality control published in journal of the KSQM for 50 years into 3 categories, we provide a chronological roadmap for individual categories, and summarize the contents and contributions of surveyed papers. Conclusion: The review paper is expected to provide future direction to improve statistical quality control theories and applications in manufacturing and service industries.
Keywords
Control Charts;Process Capability Analysis;Quality Inspections;Statistical Quality Control;
Language
Korean
Cited by
1.
A Note on the Performance of Pre-Control, Journal of the Korean society for quality management, 2016, 44, 3, 587
2.
The Analysis of Knowledge Structure using Co-word Method in Quality Management Field, Journal of the Korean society for quality management, 2016, 44, 2, 389
References
1.
Ahn, N. S., Jeong, J. S., Jeong, W. K., Hwang, W. Y., and Park, S. W. 2012. "Sampling Procedures Enhancement Goverment Defense Quality Assurance Procedures : Case Studies in Combat Force Support Material & Ammunition Areas."Journal of the Korean Society for Quality Management 40(3):245-258.

2.
Chang, K., and Shin, H. J. 1983. "An Approach to Select the Lowest Cost CSP-1 Sampling Plan(i, f)." Journal of the Korean Society for Quality Control 11(1):18-23.

3.
Chang, K., and Yang, M. H. 1997. "Detection of Changes of the Population Fraction Nonconforming in the p Control Chart." Journal of the Korean Society for Quality Control 25(3):74-85.

4.
Chang, Y. S. 2006. "Effects of Non-normality on the Performance of Univariate and Multivariate CUSUM Control Charts." Journal of the Korean Society for Quality Control 34(4):102-141.

5.
Cho, G. Y., Ahn, Y. S., and Kim, Y. J. 1997. "Variable Sampling Interval Control Charts for Number of Defectives." Journal of the Korean Society for Quality Management 25(3):62-73.

6.
Cho, J. J., and Lim, S. D. 2006. "Better Statistical Test for Process Capability Index Cp." Journal of the Korean Society for Quality Control 34(3):66-72.

7.
Cho, J. J., Park, B. S., and Park, H. I. 2004. "Better Confidence Limits for Process Capability Index Cpmk under the assumption of Normal Process." Journal of the Korean Society for Quality Management 32(4):229-241.

8.
Cho, M. S., and Lim, T. J. 2002. "The Relation between the Process Capability Index and the Quality Assurance Level Considering Various Conditions." Journal of the Korean Society for Quality Management 30(2):130-151.

9.
Cho, N. H., and Shin, S. H. 1997. "Real Time Process Control System under 100 PPM Management System." Journal of the Korean Society for Quality Control 25(1):116-134.

10.
Choi, I. J., and Hong, S. H. 2008a. "Effects of Limited Capacity on Tolerance Design for Products with N-Type Quality Characteristics." Journal of the Korean Society for Quality Control 36(2):20-27.

11.
Choi, I. J., and Hong, S. H. 2008a. "Effects of Limited Capacity on Screening Procedures Using a Surrogate Variable." Journal of the Korean Society for Quality Control 36(4):77-86.

12.
Choi, B. C., and Chun, Y. M. 2001. "Modified Two-Level Skip-Lot Sampling Plans." Journal of the Korean Society for Quality Management 29(1):113-127.

13.
Chung, Y. B., and Mun, H. J. 2002. "A Study on Process Capability Index using Reflected Normal Loss Function." Journal of the Korean Society for Quality Management 30(3):66-78.

14.
Chun, Y. R. 1995. "Design of Accelerated Life Test Sampling Plans for Exponential Distribution under Type II Censoring." Journal of the Korean Society for Quality Management 23(4):13-27.

15.
Han, B. D., and Hwang, E. C. 1983. "A study on determination of the economic parameter in $\bar{X}$ control chart." Journal of the Korean Society for Quality Management 11(1):44-50.

16.
Han, J. H., and Cho, J. J. 1998. "EWMA Control Chart for Monitoring a Process Correlation coefficient." Journal of the Korean Society for Quality Management 26(1):108-125.

17.
Hong, S. H., Choi, I. J., Lee, Y. D., Lee, M. K., and Kwon, H. M. 2007. "Design of Rectifying Inspections under a Bivariate Normal Distribution." Journal of the Korean Society for Quality Control 35(4):147-158.

18.
Hong, S. H., and Jung, M. Y. 2009. "Design of Screening Procedures Using a Surrogate Variable with Specified Producer's and Consumer's Risks." Journal of the Korean Society for Quality Management 37(4):23-30.

19.
Hong, S. H., and Lee, S. W. 1996. "ISO 2859-1 (1989), Sampling Plans Indexed by Acceptable Quality Level for Lot-by Lot Inspection." Journal of the Korean Society for Quality Management 24(3):77-93.

20.
Hong, S. H., Lee, S. Y., and Choe, S. I. 1999. "ISO/DIS 2859-1(1997), Sampling Plans Indexed by AQL for Lot-by-Lot Inspection." Journal of the Korean Society for Quality Management 27(1):135-150.

21.
Hong, S. H., Lim, H. 1995. "Economic selection of the lower limit and the process mean for a continuous production process." Journal of the Korean Society for Quality Management 23(3):20-32.

22.
Hwang, E. C. 1968. "Standard Deviation and Control Limit in Attribute Control Charts." Journal of the Korean Society for Quality Control 2(5):5-7.

23.
Hwang, E. C. 1979. "A Theory of the Variable Sampling Plans with Specified Producer's and Consumer's Risk Points(KS A 3103)." Journal of the Korean Society for Quality Control 7(1):35-40.

24.
Hwang, E. C., and Chung, Y. B. 1980. "A Study on the Determination of a Minimum Cost Sampling Inspection Plan for Destructive Testing." Journal of the Korean Society for Quality Control 8(2):15-22.

25.
Im, T. J.. and Pyun, S. S. 2000. "A process capability index Cpd consistent with the proportion of nonconforming items." Journal of the Korean Society for Quality Control 28(2):103-122.

26.
Jang, D. H. 2010. "Bootstrap Cpp Multiple Process Performance Analysis Chart."Journal of the Korean Society for Quality Control 38(2):171-179.

27.
Jeong, D. W. and Lee, J. H. 2012. "Economic Design of $\bar{X}$ Control Charts with Warning Limits under Weibull Failure Model." Journal of the Korean Society for Quality Control 40(2):186-198.

28.
Ju, Y. J., Kang, K. S., and Kim, C. E. 1992. "The Effect on AOQ in CSP-1 by a Type of Production Process."Journal of the Korean Society for Quality Control 20(2):55-66.

29.
Jung, M. S., and Lim, T. J. 2009. "Economic-Statistical Design of VSSI Cause-Selecting Charts Considering Two Assignable Causes." Journal of the Korean Society for Quality Control 37(1):29-39.

30.
Jung, W., and Chung, Y. K. 1995. "In-Line Automated inspection System for Quality Improvement of Electronic Parts." Journal of the Korean Society for Quality Management 23(3):33-44.

31.
Kang, B. C., and Cho, J. R. 1996. "An Algorithm for Determining Double Rectifying Inspection Plans." Journal of the Korean Society for Quality Management 24(4):207-223.

32.
Kang, B. C., and Cho, J. R. 2002."A Study on the Rectifying Inspection Plan & Life Test Sampling Plan Considering Cost." Journal of the Korean Society for Quality Management 30(1):74-96.

33.
Kang, B. K., and Lim. T. J. 2010. "Economic-Statistical Design of VSI Run Rules Charts."Journal of the Korean Society for Quality Management 38(2):190-201.

34.
Kang, H. S. 1984. "A study on the warning limit of statistical control chart by the heuristic approach." Journal of the Korean Society for Quality Management 12(2):15-24.

35.
Kang, H. W., Kang, C. W., and Paik, J. W. 2004 "The Z-CUSUM Control Chart for the Process with Recurring Cycles or Frequent Small Shifts" Journal of the Korean Society for Quality Management 32(2):132-153.

36.
Kim, H. C. 1969. "Variable Control Charts Using Median." Journal of the Korean Society for Quality Management 3(3):2-7.

37.
Kim, J. H., and Kim. S. B. 2012. "Local T2 Control Charts for Process Control in Local Structure and Abnormal Distribution Data." Journal of the Korean Society for Quality Management 40(3):337-346.

38.
Kim, K. S., and Lee, K. H. 1979. " Study on Economic Efficiency of Incoming Inspections-Focused on Sampling Plans by Attributes." Journal of the Korean Society for Quality Control 7(1):26-34.

39.
Kim, K. S. 1979. "A Study on the Specification-Oriented Control Chart." Journal of the Korean Society for Quality Management 7(2):3-6.

40.
Kim, K. W., Seo, H. S., and Yun, D. K. 2004. "A Design of Control Chart for Fraction Nonconforming Using Fuzzy Data" Journal of the Korean Society for Quality Management 32(2):191-200.

41.
Kim, P. K., and Cho, J. J. 1995. "Bootstrapping som process capability indices." Journal of the Korean Society for Quality Management 23(4):157-166.

42.
Kim, S. B. 1994. "Optimum Screening Procedures Using Prior Information." Journal of the Korean Society for Quality Management 22(1):142-151.

43.
Kim, S. I. 1980. "On the Estimation of Fraction Defective." Journal of the Korean Society for Quality Control 8(2):3-14.

44.
Kim, Y. B., and Park, D. S. 2000. "X control charts of autocorrelated process using threshold bootstrap method." Journal of the Korean Society for Quality Control 28(2):39-56.

45.
Kim, Y. B., Hong, J. S., and Lie, C. H. 2008. "Statistical design of Shewhart control chart with runs rules." Journal of the Korean Society for Quality Control 36(3):34-44.

46.
Kim, Y. J., Kim.D. H., and Chung, Y. B. 2012. "The Design of Robust Control Chart for A Contaminated Process." Journal of the Korean Society for Quality Control 40(3):327-336.

47.
Kwon, H. M., and Kim, Y. J. 2005. "A Study on the Multistage Screening Procedure when Inspection Errors are Present." Journal of the Korean Society for Quality Control 33(4):88-95.

48.
Kwon, H. M., Lee, M. K., Kim, S. B., and Hong, S. H. 1998. "Review of Screening Procedure as Statistical Hypothesis Testing."Journal of the Korean Society for Quality Control 26(2):39-50.

49.
Kwon, Y. I. 2002. "An Acceptance Sampling Plan for Products from Production Process with Variable Fraction Defective."Journal of the Korean Society for Quality Management 30(2):152-159.

50.
Lee, H. J., and Lim, T. J. 2004. "Statistical Efficiency of VSSI $\bar{X}$ Control Charts for the Process with Two Assignable Causes" Journal of the Korean Society for Quality Management 32(4):156-168.

51.
Lee, J. H., Cho, S. S., and Kim, J. J. 1999. "CUSUM of Squares Chart for the Detection of Variance change in the Process." Journal of the Korean Society for Quality Management 26(1):126-142.

52.
Lee, J. H., Jeon, T. Y., and Cho, S. S. 1998. "Robust CUSUM chart for Autocorrelated Process." Journal of the Korean Society for Quality Management 27(4):123-142.

53.
Lee, J. H., Kang, H. W., Hong, E. P., and Kang, C. W. 2010. "Statistical Design of CV-CUSUM Control Chart Using Fast Initial Response" Journal of the Korean Society for Quality Management 38(3):313-321.

54.
Lee, J. H., Park, C. S., and Park, J. T. 1996. "Sequential Sampling Inspection Plans for Defectives." Journal of the Korean Society for Quality Management 24(4):1-13.

55.
Lee, J. H., Park, T., Kwon, H. M., Hong, S. H., and Lee, M. K. 2010. "Optimum target values for manufacturing processes when drifting rate in the Process mean is normally distributed." Journal of the Korean Society for Quality Management 38(4):540-548.

56.
Lee, J. J. 1995. "A Study of Control Chart for Skewness." Journal of the Korean Society for Quality Management 23(4):1-12.

57.
Lee, J. J., and Lee, J. S. 2008. "A note on CUSUM design for autocorrelated processes." Journal of the Korean Society for Quality Management 36(4):87-92.

58.
Lee, J. S., Lee, J. J., and Bae, S. H. 2007. "A Study on Optimal Subgroup Size in Estimating Variance of Small Autocorrelated Samples." Journal of the Korean Society for Quality Management 35(2):106-112.

59.
Lee, J. S., and Yun, W. Y. 2001. "A case Study on Electronic Part Inspection based on Surrogate variable." Journal of the Korean Society for Quality Management 29(3):124-137.

60.
Lee, K. J., and Lee, S. Y. 1993. "The Economic Design of Two-Stage Sampling Plan for Attributes." Journal of the Korean Society for Quality Control 12(1):35-43.

61.
Lee, M. K. 2005. "Economic Selection of Optimum Process Mean for a Mixture Production Process." Journal of the Korean Society for Quality Control 33(4):111-116.

62.
Lee, S. G., and Yun D. K. 1996. "The Allocation of Inspection Stations in Multi-Stage production Systems with 0-1 Integer programming." Journal of the Korean Society for Quality Management 24(1):20-31.

63.
Lee, T. H., Lee, J. H., Lee, M. K., and Lee, J. H. 2009. "Economic Design of $\bar{X}$ Control Chart Using a Surrogate Variable." Journal of the Korean Society for Quality Management 37(2):46-57.

64.
Lee, Y. D., and Ahn, B. J. 2005. "A New Performance Criterion for CUSUM Control Chart." Journal of the Korean Society for Quality Management 33(4):96-102.

65.
Lee, Y. D., and Kim, S. I. 2005. "CUSUM Control Chart for Monitoring Process Variance." Journal of the Korean Society for Quality Management 33(3):149-155.

66.
Lim, T. J. 2004. "An Adaptive Synthetic Control Chart for Detecting Shifts in the Process Mean." Journal of the Korean Society for Quality Management 32(4):169-183.

67.
Lim, T. J. 2007. "The ARL of a Selectively Moving Average Control Chart." Journal of the Korean Society for Quality Management 35(1):24-34.

68.
Lim, T. J. 2008. "A Comparative Study on the Design of Adaptive Control Charts." Journal of the Korean Society for Quality Management 36(1):7-19.

69.
Lim, T. J., and Kim, Y. D. 2003. "Economic Design of Synthetic Control Charts." Journal of the Korean Society for Quality Management 31(2):117-130.

70.
Lim, T. J., and Song, S. K. 2003. "Bootstrap Confidence Intervals of the Process Capability Index Based on the EDF Expected Loss." Journal of the Korean Society for Quality Management 31(4):164-175.

71.
Min, S. J., Kim, K.W., Ryu, J. H., and Yun, D. K. 2008. "Development and Application of Process Incapability Index including Capability Analysis of Inspection or Gage System." Journal of the Korean Society for Quality Management 30(1):118-131.

72.
Na, S. M., Kang, C. W., and Sim, S. B. 2003. "A Study of Demerit-CUSUM Control Chart and Interpretation Method." Journal of the Korean Society for Quality Management 31(1):132-141.

73.
Nam, H. S., and Kang, J. C. 2001. "An $\bar{X}$ Control Chart Based on the Gini 's Mean Difference." Journal of the Korean Society for Quality Management 29(3):79-85.

74.
Park, B. K. 1982 "Sampling Plans for Analyzing Fiber." Journal of the Korean Society for Quality Control 10(2):34-38.

75.
Park, B. S., Lee, C. H., and Cho, J. J. 2002 "On the Confidence Region of Vector-valued Process Capability lndices Cp & Cpk." Journal of the Korean Society for Quality Control 30(4):44-57.

76.
Park, J. Y., and Seo, S. K. 2012. "$\bar{X}$ Control Chart with Runs Rules: A Review." Journal of the Korean Society for Quality Management 40(2):176-185.

77.
Park, J. Y., and Seo, S. K. 2012. "Statistical Design of $\bar{X}$ Control Chart with Improved 2-of-3 Main and Supplementary Runs Rules." Journal of the Korean Society for Quality Management 40(4):467-479.

78.
Park, S. G., and Kim, Y. G. 2002. "Relationships among various factors used in calculating control limits of control chart for variable data." Journal of the Korean Society for Quality Management 30(4):86-93.

79.
Park, S. H., Kim, J. S., Park, J. C., Kim, S. S., and Baek, J. G. 2010. "A Fault Detection of Cyclic Signals Using Support Vector Machine-Regression." Journal of the Korean Society for Quality Management 38(3):354-362.

80.
Park, Y. H., and Lee, C. H. 1997. "Design of Screening Inspection in a Multi-Stage manufacturing Systems." Journal of the Korean Society for Quality Management 25(1):1-16.

81.
Riew, M. C. 1987. "A Rectifying Inspection Plan Giving LTPD Protection for Destructive Testing." Journal of the Korean Society for Quality Control 15(1):68-75.

82.
Seo, S. K., and Lee, S. S 2001. "Determination of target value under automatic vision inspection systems." Journal of the Korean Society for Quality Management 29(3):66-78.

83.
Shin, K. W., and Shin, K. I. 1995. "Empirical Bayes Estimation on Sampling Inspection by Variables." Journal of the Korean Society for Quality Management 23(3):45-56.

84.
Shin, W. S., and Kim, D. J. 1994. "Economic Design of Bayesian Acceptance Sampling Plans for Dependent Production Process." Journal of the Korean Society for Quality Management 22(1):96-112.

85.
Shin, W. S., and Cho, W. Y. 1997. " development of an Interactive Graphic-Aided Decision Support System for Designing Inspection Plan." Journal of the Korean Society for Quality Management 25(4):168-184.

86.
Shin, Y. B. 1977a. "A Study on Attributes Sampling Plans with Specified Producer's and Consumer's Risk Poins." Journal of the Korean Society for Quality Control 5(1):11-15.

87.
Shin, Y. B. 1977b. "A Study on the Item-by-Item Sequential Sampling Inspection of Low fraction Defective." Journal of the Korean Society for Quality Control 5(2):21-28.

88.
Shin, Y. B., and Hwang, E. C. 1986. "A study on the special purpose control chart for non-normal distribution." Journal of the Korean Society for Quality Control 14(1):11-18.

89.
Shin, Y. B., and Hwang, E. C. 1986. "Design of median control chart for unsymmetrical weibull distribution." Journal of the Korean Society for Quality Control 14(2):2-8.

90.
Shin, Y. B. 1987. "Design of median control chart for nonnormally distributed process." Journal of the Korean Society for Quality Control 15(2):10-19.

91.
Sim, S. B., and Kang, C. W. 2000. "The Statistical Design of VSS X Chart Considering Two Assignable Causes." Journal of the Korean Society for Quality Management 28(3):44-52.

92.
Song, M. S. 2004. "A case Study on Installation and Optimization of Machine-Vision System for Reducing Inferior Products." Journal of the Korean Society for Quality Control 32(1):63-74.

93.
Song, S. I., and Cho, Y. C. 1999. "Determination of process capability index considering inspection precision." Journal of the Korean Society for Quality Control 27(4):114-122.

94.
Song, S. I., Kim, J. H., and Jung, H. J. 2007. "Economic Design of VSI $\bar{X}$ Control Chart for Decision to Improve Process." Journal of the Korean Society for Quality Control 35(2):37-44.

95.
Song, S. I., and Jeong, H. J. 2002. "An Economic Design of the EWMA Control Charts with Variable Sampling Interval." Journal of the Korean Society for Quality Control 30(4):1-14.

96.
Song, S. I., and Park, H. K. 2005. "Development of VSI Synthetic Control Chart." Journal of the Korean Society for Quality Control 33(1):1-10.

97.
Sung, W. H., and Park, D. R. 2001. "Modified Multivariate r-Chart based on Robust Estimation." ournal of the Korean Society for Quality Control 29(1):1-10.

98.
Won, H. G. 1997. "Control Charts Based on Self-critical Estimation Process." Journal of the Korean Society for Quality Control 25(1):10-15.

99.
Yoo, C. S., and Hwang, E. C. "Economic Sampling Inspection Plan for Markov Dependent Production Processes." Journal of the Korean Society for Quality Control 12(1):65-77.