JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Automatic Transmission Parts by Using Vacuum Carburizing Heat-treatment Technology
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Automatic Transmission Parts by Using Vacuum Carburizing Heat-treatment Technology
Lee, Won-Beom; Moon, Gyung-Il; Cho, Yong-Ki; Lim, Kyung-Mook; Byun, Sang-Gyo;
  PDF(new window)
 Abstract
Vacuum carburizing process is well known process for its environment-friendly, low-cost, high-quality characteristics, compared with gas carburizing. In this study, a research was carried out to develop a process of vacuum carburizing for essential components of automotive transmission that is difficult to control its distortion. As a result, vacuum carburizing process is superior to gas carburizing in terms of cost, environment and quality.
 Keywords
Vacuum carburizing;Automatic transmission;Annulus gear;Distortion;
 Language
Korean
 Cited by
1.
침탄질화 처리된 SCM415강의 깊이에 따른 확산 및 마모특성 변화,이수연;윤국태;허석환;이찬규;

한국표면공학회지, 2011. vol.44. 5, pp.207-212 crossref(new window)
1.
The Change in Diffusion Coefficient and Wear Characteristic in Carbonitriding Layer of SCM415 Steel, Journal of the Korean institute of surface engineering, 2011, 44, 5, 207  crossref(new windwow)
 References
1.
H. Y. Kim, S. J. Park, Surface Heat Treatment, WonChang press, 1996.

2.
H. Iwata, IHI Technical Report, 45(1) (2005) 15.

3.
P. Kula, R. Pietrasik, K. Dybowski, J. Mat. Pro. Tech., 164-165 (2005) 876. crossref(new window)

4.
Francis T. Farago, Mark A. Curtis, Handbook of Dimensional Measurement 3rd edition, Industrial Press Inc., 1994.

5.
F. Chen, L. Liu, Mat. Chem & Phy., 82 (2003) 801. crossref(new window)