JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Characteristics Evaluation with Cavitation Condition of 304 Stainless Steel in Seawater Environment
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Characteristics Evaluation with Cavitation Condition of 304 Stainless Steel in Seawater Environment
Jang, Seok-Ki; Chong, Sang-Ok; Han, Min-Su; Kim, Seong-Jong;
  PDF(new window)
 Abstract
This investigation evaluated the effect of cavitation condition on electrochemical characteristics of 304 stainless steel, which is widely used for marine environment. The cavitation test with time were conducted on 304 stainless steel in seawater solution. Surface morphologies of specimen were observed by scanning electron microscope (SEM) and 3D microscope. Pitting depth, weight loss and damage rate were analyzed after each cavitation experiment. The surface damage was more severe as the current density increased. A dramatical increase in the damage depth and weight loss was observed after 7 hours of cavitation experiment.
 Keywords
Cavitation;Electrochemical experiment;Pitting depth;304 stainless steel;Sea water;
 Language
Korean
 Cited by
1.
해양 환경 하에서 16.7Cr-10Ni-2Mo 스테인리스강의 표면 손상에 미치는 캐비테이션의 영향,정상옥;한민수;김성종;

Corrosion Science and Technology, 2015. vol.14. 5, pp.239-246 crossref(new window)
1.
Effect of cavitation on surface damage of 16.7Cr-10Ni-2Mo stainless steel in marine environment, Corrosion Science and Technology, 2015, 14, 5, 239  crossref(new windwow)
2.
Electrochemical Characteristics under Cavitation-Erosion Environment of STS 304 and Hot-Dip Aluminized STS 304 in Sea Water Solution, Journal of the Korean institute of surface engineering, 2016, 49, 1, 26  crossref(new windwow)
 References
1.
C. Y. Choi, N. H. Kang, D. G. Nam, J. Kor. Inst. Surf. Eng., 44 (2011) 173. crossref(new window)

2.
J. K. Bae, S. O. Park, I. S. Chung, J. Kor. Inst. Surf. Eng., 22 (1989) 185.

3.
G. Okamoto, Corrosion Science, 13 (1973) 471. crossref(new window)

4.
T. Momma, A. Lichtarowicz, Wear, 186-187 (1995) 425. crossref(new window)

5.
M. G. Lee, S. M. Hong, Q. H. Kim, C. K. Rhee, J. Kor. Inst. Met. Mater., 44 (2006) 350.

6.
A. J. Sedriks, "Corrosion of Stainless Steels", Wiley- Interscience, (1996).

7.
Denny A. Jones, "Principles and Prevention of Corrosion", 2nd Edition, (1996).

8.
I. R. Jones, D. H. Edward, Journal of Fluid Mechanics, 7 (1960) 596. crossref(new window)

9.
M. R. Sriraman, R. Vasudevan, J. Mater. Sci., 33 (1998) 2899. crossref(new window)

10.
A. Al-Hashem, P. G. Caceres, A. Abdullah, H. M. Shalaby, NACE International, 53 (1997) 103.

11.
K. H. Lo, F. T. Cheng, C. T. Kwok, H. C. Man, Surface & Coatings Technology, 165 (2003) 258. crossref(new window)

12.
Y. Zheng, S. Luo, W. Ke, Wear, 262 (2007) 1308. crossref(new window)

13.
X. B. Zhang, C. S. Liu, J. Zhu, Y. G. Zheng, Joural-Northeastern University Natural Science, 27 (2006) 1335.

14.
A. Neville, T. Hodgkiess, British Corrosion Journal, 32 (1997) 197. crossref(new window)

15.
Book of ASTM Standards G32-92, 110, (1992).

16.
M. Qin, D. Y. Ju, R. Oba, Surface & Coating Technology, 200 (2006) 5364. crossref(new window)

17.
J. C. Park, S. J. Lee, S. J. Kim, J. Kor. Inst. Surf. Eng., 44 (2011) 277. crossref(new window)

18.
D. Y. Ju, H. Tsuda, V. Ji, T. Uchiyama, R. Oba, Proceedings of the Third International Conference on Advanced Technology in Experimental Mechanics, 399 (2003).

19.
S. J. Kim, K. Y. Hyun, S. K. Jang, Current. Appl. Phys., 12 (2012) S24.

20.
D. Odhiambo, H. Soyama, International Journal of Fatigue, 25 (2003) 1217. crossref(new window)

21.
ASTM Special Technical Publication, 567 (1982).

22.
S. J. Lee, S. J. Kim, Corros. Sci. Tech., 11 (2012) 205.

23.
H. Mochizuki, M. Yokota, S. Hattori, Wear, 262 (2007) 522. crossref(new window)

24.
G. Bregliozzi, A. Di Schino, S. I. U. Ahmed, J. M. Kenny, H. Haefke, Wear, 258 (2005) 503. crossref(new window)