Advanced SearchSearch Tips
Solubility and Yield Characteristics of KCl in Cement By-Pass Dust
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Solubility and Yield Characteristics of KCl in Cement By-Pass Dust
Yun, Youngmin; Jeong, Jaehyun; Chu, Yongsik;
  PDF(new window)
Cement manufacturing plant uses various kinds of industrial/municipal waste. The waste contains considerable amount of potassium, chlorine and small amount of heavy metal. Many researches were performed to fabricate valuable resources from the waste. In this study, various methods, which dissolves and crystallizes potassium/chlorine to extract potassium chloride, were experimented. Especially amount of water, slurry temperature, and stirring time were controlled. Then kind of heavy metal and content of potassium chloride were analyzed. The yield of potassium chloride increased, as the amount of water for slurry increased but it increased slightly, when the water content was over 200%. The yield tended to increase, when the temperature of slurry was over a certain point. The yield did not increase in case of over 10 minutes stirring time. The kind and content of heavy metal in potassium chloride were various according to stirring time. The main heavy metals were Pb, Cu, and .
Waste recycling;By-pass dust;Potassium Chloride;Heavy metal;Slurry;
 Cited by
Pranab Barkakati, Dipak Bordoloi, Prakash Ch. Borthakur, 1994 : Paddy husk as raw material and fuel for making portland cement, Cement and Concrete Research, 24(4), pp613-620 crossref(new window)

P.E. Tsakiridis et al., 2005 : Examination of the jarosite- alunite precipitate addition in the raw meal for the production of portland cement clinker, Cement and Concrete Research, 35(11), pp2066-2073 crossref(new window)

M. Schneider et al., 2011 : Sustainable cement production-present and future, Cement and Concrete Research, 41(7), pp642-650 crossref(new window)

N. Gineys, G. Aouad, D. Damidot, 2011 : Managing trace elements in Portland cement - Part II: Comparison of two methods to incorporate Zn in a cement, Cement and Concrete Composites, 33(6), pp629-636 crossref(new window)

N. Gineys, G. Aouad, D. Damidot, 2010 : Managing trace elements in Portland cement - Part I: Interactions between cement paste and heavy metals added during mixing as soluble salts, Cement and Concrete Composites, 32(8), pp563-570 crossref(new window)

HuXing Chen, Xianwei Ma, HengJie Dai, 2010 : Reuse of water purification sludge as raw material in cement production, Cement and Concrete Composites, 32(6), pp436-439 crossref(new window)

Gang-Soon Choi, F.P. Glasser, 1988 : The sulphur cycle in cement kilns: Vapour pressures and solid-phase stability of the sulphate phases, Cement and Concrete Research, 18(3), pp 367-374 crossref(new window)

Korea Industrial Standards, 2011 : Ready-mixed concrete, KS F 4009

N.B. Singh, K.N. Bhattacharjee, A.K. Shukla, 1995 : Effect of alkali bypass dust on the hydration of granulated blast furnace slag blended cement, Cement and Concrete Research, 25(4), pp883-892 crossref(new window)

H. Y. Ghoraba et al., 2004 : Resuse of Cement Kiln Bypass Dust in the Manufacture of Ordinary Portland Cement, Polymer-Plastics Technology and Engineering, 43(6), pp1723-1734 crossref(new window)

TAMURA N., SAITO S., KONDOU K., 2010 : Washing method for incineration ash and dust in combustion gas extracted from cement kiln, PCT/JP2010/052254