Advanced SearchSearch Tips
A Study on the Characteristics of the Stack Effect Occurs in Independent Core Type's Office Building
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on the Characteristics of the Stack Effect Occurs in Independent Core Type's Office Building
Song, Cha-Won; Chung, Kwang-Seop; Jang, Hyun-Mun; Youn, Jeung-Eun; Lim, Tae-Sub;
  PDF(new window)
For a general office building having a center core, the distinction between the outer wall and the compartment should be clear, and it should be set at a stack effect pressure distribution acting on the respective compartment by a relative area ratio of the respective leak compartment. In the case of office buildings with an independent core for core there, some blocks of shares and exterior pressure distribution in buildings and office buildings typically have different characteristics. Therefore, if the stack effect reduction measures, designed on the basis of a general office building are applied to a stand-alone building, the core of the building should reflect the unique pressure distribution characteristics. This study, performed as part of the object corresponding to the flat plan of the building in the diversification trend, analyzed the stack effect that actually occurs in an office building having the properties intended for stand-core construction, and thus on the basis of and tested by the method of using a conventional stack effect reduction measures. Reviewed in the study, an independent cored office building that does not have the air flow path through the specific space with respect to the center core type office building has a feature, and the variation in characteristics of the pressure distribution inside the building according to this air flow path stack effect was reduced by a variety of measures that should be applied to determine the application.
Stack effect;Office building;Independent core;Simulation;CONTAMW;
 Cited by
Tamura, G. T., 1994, Smoke movement and control in high-rise buildings, The national fire protection association, Inc., Quincy, Massachusetts USA.

Lee, J.-H., Lim, H. W., Seo, J., Lee, J., Song, D.-S., 2009, Effect of the a floor plan of lobby floor for the Stack Effect in a High-rise Building, Proceedings of the SAREK Summer Annual Conference, pp. 293-299.

Jo, J.-H., Yeo, M.-S., Yang, I.-H., Kim, K.-W., 2000, A Study on the Stack Effect in High-rise Building, AIK, Fall Conference, pp. 769-772.

Lim et al., 2009, A Study on Application of an E/V Shaft Cooling System to Reduce the Stack Effect in High-Rise Building, Proceedings of the SAREK Summer Annual Conference, pp. 284-292.

Park, D. R. et al., 2007, Reduction Strategies of Stack Effect in High-Rise Residential Building, AIK, Conference, pp. 773-776.

Jo, J.-H. et al., 2002, A Case study on the field measurement and reduction of the stack effect in highrise buildings, AIK Journal, Vol. 18, No. 7, pp. 169-176.

Wang, M.-H. et al., 2008, Investigation into the variable characteristics of the air flow rates for reducing the stack effect using the revolving door, KSLES Journal, Vol. 15, No. 4, pp. 440-446.

Kim, J.-J. et al., 2014, Research on HVAC system operating schemes for pressurization to reduce stack effect problems in elevator halls of high-rise office building, AIK Journal, Vol. 30, No. 6, pp. 239-246.

Lee, J. H. et al., 2008, Study on the measures for stack effect considering sustainable side, Magazine of the SAREK, Vol. 37 No. 11, pp. 35-40.

Song, D. et al., 2008, Summary and measures for the stack effect, Magazine of the SAREK, Vol. 37, No. 11, pp. 4-13.