JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Thermal Performance Tester for Non-Homogeneous Insulation Pannels Installed Vertically
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Thermal Performance Tester for Non-Homogeneous Insulation Pannels Installed Vertically
Oh, Hong Young; Song, Ki O; Jeon, Hyun Ik; Cho, Sun Young;
  PDF(new window)
 Abstract
In case of metal insulation, which is produced by stacking stainless steel sheets and air layers in a multi-stack manner at a specific thickness, insulation performance will be evaluated based on thermal transmittance rather than the intrinsic physical properties of each material such as thermal conductivity. However, there is no standard for measuring thermal transmittance targeted for non-homogeneous insulation which is used in relatively high temperature conditions such as a power station. In this study, the thermal conductivity of homogeneous insulation acquired by the standardized guard hot plate method and the thermal conductivity of homogeneous insulation measured by the newly developed performance tester were compared to verify the confidence level of the tester. As a result, thermal conductivity acquired by the newly developed thermal transmittance tester was about 6% higher than the thermal conductivity measured by the existing guard hot plate method under the anticipated service temperature conditions.
 Keywords
Guarded hot plate method;Guarded hot box method;Non-homogeneous;Thermal transmittance;Thermal conductivity;Heat loss;
 Language
Korean
 Cited by
 References
1.
USNRC, 2003, Water Sources for Long-Term Recirculation Cooling Following a Loss-of-Collant Accident, Regulatory Guide 1.82, Rev. 3.

2.
USNRC, 2005, GSI-191:Experimental Studies of Loss of Coolant Accident Generated Debris Accumulation and Head Loss with Emphasis on the Effects of Calcium Silicate Insulation, NUREG/CR-6874.

3.
KATS, 2012, Determination of Steady State Thermal Transmission Properties-Calibrated and Guarded Hot Box, KS F 2277.

4.
KATS, 2012, Test Methods for Thermal Transmission Properties of Thermal Insulation, KS L 9016.

5.
John, G., William, A., and Marc, J., 2014, Measurement Instrumentation and Sensors Handbook, CRC PRESS, Second Edition, pp. 33-34.

6.
Neil, E. and Mujid, S., 2012, Nuclear Systems, CRC PRESS, Vol. 1, p. 828.