Advanced SearchSearch Tips
Monitoring of Dry Cutting and Applications of Cutting Fluid for Ball End Milling
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Monitoring of Dry Cutting and Applications of Cutting Fluid for Ball End Milling
Tangjitsitcharoen, Somkiat; Rungruang, Channarong; Laiaddee, Duangta;
  PDF(new window)
For economical and environmental reasons, the aim of this research is hence to monitor the cutting conditions with the dry cutting, the wet cutting, and the mist cutting to obtain the proper cutting condition for the plain carbon steel with the ball end milling based on the consideration of the surface roughness of the machined parts, the life of the cutting tools, the use of the cutting fluids, the density of the particles of cutting fluids dispersed in the working area, and the cost of cutting. The experimentally obtained results of the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and tool wear can be explained by the in-process cutting forces. The models of the tool wear with the cutting conditions and the cutting times are proposed to estimate the tool cost for the different cooling strategies based on the experimental data using the multiple regression technique. The cutting cost is calculated from the costs of cutting tool and cutting fluid. The mist cutting gives the lowest cutting cost as compared to others. The experimentally obtained proper cutting condition is determined based on the experimental results referring to the criteria.
Ball End Milling;Dry Cutting;Wet Cutting;Mist Cutting;Cutting Force;Tool Life;
 Cited by
Prediction of surface roughness in ball-end milling process by utilizing dynamic cutting force ratio, Journal of Intelligent Manufacturing, 2017, 28, 1, 13  crossref(new windwow)
7-Leaders Corp. (2007/2008), End mills, Drills, Reamers Solid Carbide Cutting Tools Catalog, 39.

Cakir, O., Kiyak, M., and Altan, E. (2004), Comparison of gases applications to wet and dry cutting in turning, Journal of Materials Processing Technology, 153, 35-41. crossref(new window)

Dhar, N. R., Islam, M. W., and Mithu, M. A. H. (2006), The influence of minimum quantity lubricant (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel, Journal of Materials Processing Technology, 171, 93-99. crossref(new window)

Diniz, A. E. and Micaroni, R. (2002), Cutting conditions for finish turning process aiming: the use of dry cutting, International Journal of Machine Tools and Manufacture, 42, 899-904. crossref(new window)

Dolinsek S., Sustarsic B., and Kopac J. (2001), Wear mechanisms of cutting tools in high-speed cutting processes, Wear, 250, 349-356. crossref(new window)

Gunter, K. L. and Sutherland, J. W. (1999), An experimental investigation into the effect of process conditions on the mass concentration of cutting fluid mist in turning, Journal of Cleaner Production, 7, 341-350. crossref(new window)

Kishawy, H. A., Dumitrescu, Ng, E. G., and Elbestawi, M. A. (2005), Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy, International Journal of Machine Tools and Manufacture, 45, 219-227. crossref(new window)

Ii, M., Eda, H., Imai, T., Nishimura, M., Kawasaki, T., Shimizu, J., Yamamoto T., and Zhou, L. (2000), Development of water-content cutting fluids with a new concept fire prevention and environmental protection, Journal of the International Societies for Precision Engineering and Nanotechnology, 24, 231-236.

Rahman, M., Kumar, A. S., and Salam, M. U. (2002), Experimental evaluation on the effect of minimal quantities of lubricant in milling, International Journal of Machine Tools and Manufacture, 2, 539-547.

Somkiat, T. (2009), In-process investigation of turning process applied with and without cutting fluid, Journal of mechanical engineering, 6, 85-102.

Sutherland, J. W., Kulur, V. N., and King, N. C. (2000), An experimental investigation of air quality in wet and dry turning, Annals of the CIRP, 49, 61-64. crossref(new window)

Thepsonthi, T., Hamdi, M., and Mitsui, K. (2009), Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills, International Journal of Machine Tools and Manufacture, 49, 156-162. crossref(new window)

Varadarajan, A. S., Philip, P. K., and Ramamoorthy, B. (2002), Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning, International Journal of Machine Tools and Manufacture, 42, 193-200. crossref(new window)

Weinert, K., Inasaki, I., Sutherland, J. W., and Wakabayashi, T. (2004), Dry machining and minimum quantity lubrication, Annals of the CIRP, 53, 511-537. crossref(new window)

Tasdelen B., Thordenberg H., and Olofsson D. (2008), An experimental investigateion on contact length during minimum quantity lubrication (MQL) machining, Journal of Materials Processing Technology, 203, 221-231. crossref(new window)