Advanced SearchSearch Tips
A Study of 3D Printing of Self-Customization Cast by Using Fused Deposition Modeling Technique of ABS Resin
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study of 3D Printing of Self-Customization Cast by Using Fused Deposition Modeling Technique of ABS Resin
Seoung, Youl-Hun;
  PDF(new window)
In this study, we have tried to use 3D-printing technology, which is very useful for small amount production and individual personalization manufacturing to produce a cast customized by individual. To do this, we have made casts by the 3D printer in the method of fused deposition modeling technique using ABS(acrylonitrile butadiene styrene) resin which is thermoplastic plastics. The computed tomography of human hand part was used as the modeling of the cast and it was designed to circulate air well. As a result, an individual personalized cast that fitted well with the model part was produced. In addition, we could get more excellent radiography from the cast than the existing cast. In conclusion, this study of 3D-printing could be used as basic data when a similar designed structure in fused deposition modeling technique by ABS resin is printed out.
Acrylonitrile Butadiene Styrene;Cast;Fused Deposition Modeling;Self-Customization;Three-Dimensional Printing;
 Cited by
발전소 저탄장에 적용되는 풀코드스위치 부품의 구조최적화 3D 프린팅 제작기술 개발,이혜진;

한국산학기술학회논문지, 2016. vol.17. 10, pp.319-330 crossref(new window)
아크릴로나이트릴·뷰타다이엔·스타이렌 수지와 용융적층조형 방식의 3차원 프린팅 기술로 제작된 전산화단층영상장치 팬톰에서 영상 균일성 및 X선 투과성 평가,성열훈;

대한방사선기술학회지:방사선기술과학, 2016. vol.39. 3, pp.337-344 crossref(new window)
The Development of a Wrist Brace using 3D Scanner and 3D Printer, Fashion & Textile Research Journal, 2017, 19, 3, 312  crossref(new windwow)
J. P. Kruth, M.C. Leu, T. Nakagawa, "Progress in Additive Manufacturing and Rapid Prototyping", Annals of the CIRP, Vol. 47, No. 2, pp. 525-540, 1988. DOI:

P. Kulkarni, A. Marsan, D. Dutta, "A review of process planning techniques in layered manufacturing", Rapid Prototyping Journal, Vol. 6, No. 1, pp. 18-35, 2000. DOI: crossref(new window)

D. Y. Yang, H. K. Shon, "Recent State of Rapid Prototyping Technique for Rapid Product Manufacturing", Journal of the Korean Society of Precision Engineering Vol. 17, No. 10, pp. 5-10, 2000.

P. Yayue, Z. Xuejin, Z. Chi, C. Yong, "Smooth surface fabrication in mark projection based stereolithography", Journal of Manufacturing Processes, Vol. 14, No. 4, pp. 460-470, 2012. DOI: crossref(new window)

G. Katal, N. Tyagi, A. Joshi, "Digital Light Processing and its Future Applications", Int. J. of Scientific and Research Publication, Vol. 3, No. 4, pp.1-8, 2013.

W. Ruban, J. Gideon George, H. Chockalingam, "process parameters optimization in selective laser sintering", ISR National Journal, Vol. 1, No. 1, pp. 42-55, 2014.

S. H. Ahn, M. Montero, D. Odell, S. Roundy, P. K. Wright, "Anisotropic material properties of fused deposition modeling ABS", Rapid Prototyping Journal, Vol. 8 Iss: 4, pp. 248-257 DOI:


E. J. Choi, S. A. Kim, J. Y. Bae, et al., "A Study on the State-of-the-Art of 3D Printers", Journal of The Korea Society of Computer and Information, Vol. 21, No. 2, pp. 385-388, 2013.

Y. H. Seoung, "3-Dimensional Printing for Mesh Types of Short Arm Cast by Using Computed Tomography", The Journal of the Korea Contents Association, Vol. 15, No. 1, pp. 308-315, 2015. DOI: crossref(new window)

H. M. Sohn, J. Y. Lee, S. H. Ha, et al., "Rapid Prototyping Assisted Orthopaedic Fracture Surgery - A Case Report", Journal of the Korean Orthopaedic Association Vol. 39, No. 7, pp. 845-848, 2004. crossref(new window)

C. J. Lee, J. N. Sohn, "Plans for 3D printers Diffusion-Focusing on production figures-", Journal of digital convergence, Vol .12 No. 9, pp. 335-341, 2014.

W. K. Oh, "Customized Model Manufacturing for Patients with Pelvic Fracture using FDM 3D Printer", The Journal of the Korea Contents Association, Vol. 14, No. 11, pp. 370-377, 2014. DOI: crossref(new window)

S. H. Park, J. H. Park, H. J. Lee, N. K. Lee, "Current Status of Biomedical Applications using 3D Printing Technology", Journal of the Korean Society of Precision Engineering, Vol. 31, No. 12, pp. 1067-1076, 2014. DOI: crossref(new window)

J. S. Miller, K. R. Stevens, M. T. Yang, et al., "Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues", Nat Mater. Vol. 11, No. 9, pp. 768-774, 2012. DOI: crossref(new window)