Advanced SearchSearch Tips
Evaluation on Uniaxial Compression Strength of SSG Method with Curing Condition
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Evaluation on Uniaxial Compression Strength of SSG Method with Curing Condition
Choi, Yong-Sung; Kim, Byoung-Il; Moon, In-Jong; Heo, Jun;
  PDF(new window)
The grouting method, which can be used to effectively improve small areas within a short amount of time, may have different injection effects depending on the ground conditions and the levels of a water table. In particular, for ground with a relatively large permeability, the strength of the ground and the water proof ability can decrease over time due to the leaching process. To solve this problem, a "self-healing smart grouting (SSG) method", which was designed to maintain the initial strength of the ground by minimizing the leaching process, was developed recently. In this study, uniaxial compression tests were carried out on SSG samples to understand the strength of SSG over curing time where two different curing temperatures have been applied for comparison. The uniaxial compression strength of SSG was further compared with the samples prepared using conventional methods (LW and SGR). The test results showed that the uniaxial compression strength of SSG was higher at both high and low curing temperatures compared to that of the samples prepared using conventional methods. The initial strength of SSG was also relatively higher.
Grout material;Initial strength;Self-healing smart grouting;Uniaxial compression strength;Uniaxial compression tests;
 Cited by
자기치유 기능을 이용하는 SSG공법의 공학적 특성,문인종;김병일;허준;최용성;최용기;

한국지반공학회논문집, 2016. vol.32. 3, pp.29-37 crossref(new window)
B. I. Kim, S. M. Cho, J. H. Kim, S. R. Kim, Soft Ground Improvement Methods. CIR Publishing Co., 2015.

B. S. Chun, "Development and Practice of the Inorganic Ultra Fine Cement and Silica Sol", Ministry of Construction and Transportation, 1997.

H. C. Yang, "Hardening Behaviour of Sodium Silicate-Cement Grout", Hanyang University, 2007.

Y. J. Lim, K. H. Lee, H. K. Kim, C. S. Hong, J. H. Ahn, "Development of New Micro-Cement Grouting Materials for Tunneling", Korean Geotechnical Society Fall National Conference 2008, pp.1559-1570, 2008.

Y. H. Kim, "A Study on Engineering Characteristics for Alkali Silicasol Grout Material", Hanyang University, 2014.

S. J. Kim, "Characteristics of Seawater-resistance for Geo-polymer Grout", Hanyang University, 2012.

H. H. Shin, M. C. Park, K. H. Park, J. W. Seo, "A Empirical Study on Durability and Waterproofing Characteristic of Space Multi-Injection Grouting Method", Korean Geo-Environmental Society, Vol.14, No.1, pp.53-60, 2013.