JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Study on Isolation Performance of High Damping Rubber Bearing Through Shaking Table Test and Analysis
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on Isolation Performance of High Damping Rubber Bearing Through Shaking Table Test and Analysis
Kim, Hu-Seung; Oh, Ju;
  PDF(new window)
 Abstract
The research, development and use of seismic isolation systems have been increasing with the gradual development of structure safety assurance methods for earthquakes. The High Damping Rubber Bearing (HDRB), one type of seismic isolation system, is a Laminated Rubber Bearing using special High Damping Rubber. However, as its damping function is slightly lower than that of the Lead Rubber Bearing, a similar seismic isolation system, its utilization has not been high. However, the HDRB has a superior damping force to the Natural Rubber Bearing, which has similar materials and shapes, and the existing Lead Rubber Bearing has a maleficence problem in that it contains lead. Thus, studies on HDRBs that do not use lead have increased. In this study, a test targeting the HDRB was done to examine its various dependence properties, such as its compressive stress, frequency and repeated loading. To evaluate the HDRB's seismic performance in response to several earthquake waves, the shaking table test was performed and the results analyzed. The test used the downscaled bridge model and the HDRB was divided into seismic and non-seismic isolation. Consequently, when the HDRB was applied, the damping effect was higher in the non-seismic case. However, its responses on weak foundations, such as in Mexico City, represented increased shapes. Thus, its seismic isolator.
 Keywords
High Damping Rubber Bearing;Seismic Isolation;Seismic Analysis;Shaking Table Test;
 Language
Korean
 Cited by
 References
1.
Koo GH, Lee JH, Yoo B, "Performance Experiments and Analysis of Nonlinear Behavior for HDRB Using in Seismic Isolation, J. of EESK, EESK, Vol. 2, No. 4, pp.1-113, 1998.

2.
Jung GY, Ha DH, Park KN, Kim DH, "Experimental study on characteristics of low hardness rubber bearing", J. of KSCE, KSCE, Vol. 22, No. 6A, pp.1295-1307, 2002.

3.
Oh J, Jung HY, "An Experimental Study for the Shear Property Dependency of High Damping Rubber Bearings", J. of KSCE, KSCE, Vol. 30, No. 2A, pp.121-129, 2010.

4.
Takayama Mineo, "Isolation to 4 seconds-Sesimic Isolation Design", Engineering Books, 1997.

5.
J.S.S.I, "Introduction to Seismic Isolation Structure", Japan Society of Seismic Isolation, Ohmsa, 2002.

6.
Kelly JM, "A Seismic Base Isolation : Review and Bibliography", Soil Dynamics and Earthquake Engineering, Vol. 5, pp.202-216, 1986. DOI: http://dx.doi.org/10.1016/0267-7261(86)90006-0 crossref(new window)

7.
Lee IM, Earthquake and Soil, Korea Society Civil Engineering, Vol.35, No.5, pp.40-42, 1987.

8.
Kim YS, Im JS, Yun CB, Kim NS, "Shaking Table Tests and Simplified Anasysis of Bridge with Base Isolators Consisting of PTFE Plates and Rubber Rings", J. of KSCE, KSCE, Vol. 19, No. I-6, pp.899-906, 1999.

9.
Chung WJ, Yun CB, Kim NS, Seo JW, "Shaking table and psedodynamic tests for the evaluation of the seismic performance of base-isolated structures", Engineering Structures, Vol. 21, pp.365-379, 1999. DOI: http://dx.doi.org/10.1016/S0141-0296(97)00211-3 crossref(new window)

10.
Yi MW, Bijan S, "Shaking table testing of a base isolated model", Engineering Structures, Vol. 24, pp.1203-1215, 2002. DOI: http://dx.doi.org/10.1016/S0141-0296(02)00054-8 crossref(new window)

11.
Tsai MH, Wu SY, Chang KC, Lee GC, "Shaking table tests of a scaled bridge model with rolling-type seismic isolation bearings", Engineering Structures, Vol. 29, pp.694-702, 2007. DOI: http://dx.doi.org/10.1016/j.engstruct.2006.05.025 crossref(new window)

12.
Jeon BG, Chang SJ, Kim NS, "Seismic Performance Evaluation of Con-type Friction Pendulum Bearing System Using Shaking Table Test" J. of KSNVE, Vol. 21, No. 7, pp.599-608, 2011.

13.
Kim MK, Choun YS, Choi IK, "A Shaking Table Test for Equipment Isolation in the NPP(I):Rubber Beaing, J. of EESK, EESK, Vol. 8, No. 5, pp.65-77, 2004.

14.
ISO 22762, Elastomeric Seismic Protection Isolators Part-1 : Test Methods, 2010.

15.
ISO 22762, Elastomeric Seismic Protection Isolators Part-2 : Applications for bridge- specifications, 2010.

16.
Korea Road and Transportation Association, Limit-State based Bridge Design Specification, Ministry of Load Infrastructure and Transport, 2012.