JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Case of Developing Analysis Model for Recoil System for Automatic Gun
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Case of Developing Analysis Model for Recoil System for Automatic Gun
Noh, Dae-Kyung; Kang, Young-Ky; Ji, Jae-Do; Park, Jin-Saeng; Jang, Joo-Sup;
  PDF(new window)
 Abstract
Recoil system for 40mm automatic gun is a device developed to absorb the shock of explosion. It is impossible to conduct pinpoint strike due to recoil if very high explosive shock, which is generated when an automatic gun fires shells, can`t be absorbed. This study covers development and verification of analysis model for recoil system by utilizing a multi-domain software. The research process is as in the following. First, an analysis model is developed to verify damping characteristics through understanding of design intention. Second, environment which is identical to a field test is set up on analysis tool after putting explosive force that is measured through the test into the analysis model. Finally, the analysis model for recoil system using the multi-domain software is verified if it has effectiveness with a comparison between internal pressure of the recoil system along with displacement of gun barrel and the field test result.
 Keywords
Recoil system;Explosive force;Force-Stroke curve;Force-Velocity curve;Effectiveness;SimulationX;
 Language
Korean
 Cited by
1.
지능형 브레이커의 자동타격 메카니즘 분석,박성수;노대경;이대희;이근호;강영기;조재상;장주섭;

한국시뮬레이션학회논문지, 2016. vol.25. 4, pp.31-42 crossref(new window)
2.
설계 타당성 검토를 위한 압력·유량 제어형 사판식 피스톤 펌프의 해석모델 개발,이근호;노대경;박성수;이대희;진정만;장주섭;

한국시뮬레이션학회논문지, 2016. vol.25. 4, pp.53-63 crossref(new window)
 References
1.
T.H. Yang, Y.S. Lee, K.S. Lee, S.B. Jun, K.J. Kang (2012), "A Study on Parameters of Soft Recoil Mechanism for Reduction of Recoil Force", Journal of the Korea Society of Mechanical Engineers A, Vol. 36, No. 7, pp. 823-828. crossref(new window)

2.
Y.S. Kim, S.S. Kim, K.U. Cha, M.G. Noh (2011), "Study on Designing Recoil System with Friction Springs", Journal of the Korea Society of Mechanical Engineers A, Vol. 35, No. 4, pp. 367-374. crossref(new window)

3.
C.B. Shin, J.S. Bae, J.H. Hwang, K.J. Kang, S.T. Ahn, T.H. Han (2008), "Control of a Soft Recoil System for Recoil Force Reduction", Journal of the Korea Society for Noise and Vibration Engineering, Vol. 18, No. 7, pp. 764-774. crossref(new window)

4.
D.K. Noh, J.S. Jang (2013), "Shape Design Sensitivity Analysis Case of the Valves installed in the Hydraulic Driving Motor", Journal of the Korea Society for Simulation, Vol. 22, No. 3, pp. 81-87. crossref(new window)

5.
D.K. Noh, J.S. Jang (2012), "Dynamic Analysis of the Valves installed in the swash plate type of Hydraulic Driving Motor", journal of Korea Society of Fluid Power & Construction Equipments, Vol.9, No.4, pp. 62-69.

6.
J.W. Yun (2004), "CFD Analysis on the Continuous and Variable Damping Characteristics of a Semi-Active Shock Absorber", Journal of the Korea Society of Automotive Engineers, Vol. 12, No. 2, pp. 101-108.

7.
D.K. Noh, J.S. Jang, W.J. Seo (2014), "Analysis of Design Parameter Characteristics for Automobile Passive Dampers", Journal of the Korea Society of Tribologists & Lubrication Engineers, Vol. 30, No. 1, pp. 46-51. crossref(new window)

8.
Y.H. Yoon, J.S. Jang (2012), "SimulationX, Multi-domain Simulation and Modeling tool for the Design, Analysis, and Optimization of Complex systems", journal of Korea Society of Fluid Power & Construction Equipments, Vol. 9, No. 1, pp. 56-69.

9.
D.K. Noh, W.J. Seo, J.S. Yun, J.S. Jang (2015), "Performance Comparison Analysis of Frequency Sensing Shock Absorber and Passive Shock Absorber", Journal of the Korea Society of Automotive Engineers, Vol. 23, No. 4, pp. 380-387. crossref(new window)