JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Hardware-In-the-Loop Simulation of ECU using Reverse Engineering
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Hardware-In-the-Loop Simulation of ECU using Reverse Engineering
Park, Ji-Myoung; Ham, Won-Kyung; Ko, Min-Suk; Park, Sang-Chul;
  PDF(new window)
 Abstract
Increasing the proportion of an embedded system in automotive industry, test methods for evaluation and fault detection of the embedded system have been researched. HILS is a test method that is used in the development and test of complex real-time embedded systems. In this study, we defined the HILS method of the ECU, one of the embedded systems used in automobiles. Our method is to create a test model that can provide a virtual vehicle environment to the ECU on the basis of the actual vehicle data. The test model has reference information that can transmit the sensor signal and CAN Message into the ECU from HILS tester. In this study, the HILS can detect faults of the target ECU.
 Keywords
Hardware In the Loop Simulation (HILS);Reverse engineering;Embedded System;Electronic Control Unit;Engine Management System ECU (EMS ECU);
 Language
Korean
 Cited by
 References
1.
I. Arsie, G. Betta, D. Capriglione, A. Pietrosanto and P. Sommella (2014), "Functional testing of measurement-based control systems: An application to automotive", Measurement, Vol. 54, pp. 222-233. crossref(new window)

2.
H. Cho (2014), "Design and Application of Accelerated Run-in Test for ECU Quality Improvement", Transaction of KSAE, Vol. 22, No. 4, pp. 145-151. crossref(new window)

3.
J. Baek (2011), "A Study on Reliability Evaluation of Embedded Software in Vehicle", Transaction of KSAE, Vol. 19, No. 4, pp. 1-7.

4.
S. Lee and S. Shin (2014), "Software Fault Injection Test Methodology for the Software Verification of ISO 26262 Standards-based," Transaction of KSAE, Vol. 22, No. 3, pp. 68-74.

5.
D. Jung and K. Min (2009), "Study on the Development of HILS System Using HEV's ECUs," KSAE Annual Conference Proceedings, pp. 2887-2892.

6.
H. K. Fathy, Z. S. Filipi, J. Hagena and J. L. Stein (2006), "Review of Hardware-in-the-Loop Simulation and Its Prospects in the Automotive Area", Proceeding of SPIE, Vol. 6228.

7.
J. Cho, D. Choi, S. Yoo and W. Lee (2000), "PC-Based Real-Time Driving Simulation", Proceeding of the korea society for simulation, pp. 192-197.

8.
D. Ramaswamy, R. McGee, S. Sivashankar, A. Deshpande, J. Allen, K. Rzemien and W. Stuart (2004), "A Case Study in Hardware-In-the-Loop Testing: Development of an ECU for a Hybrid Electric Vehicle", SAE Technical Paper Series, 2004-01-0303.

9.
E. Bringmann and A. Kramer (2008), "Model-based Testing of Automotive Systems", International Conference on Software Testing, Verification, and Validation, pp. 485-493.

10.
W. Lee, S. Park and M. Sunwoo (2004), "Towards a seamless development process for automotive engine-control system," Control Engineering Practice, Vol. 12, pp. 977-986. crossref(new window)

11.
L. Jun, G. Ying-qing and W. Hai-Quan (2008), "Rapid Prototyping Real-Time Simulation Platform for Digital Electronic Engine Control", IEEE, and Validation, pp. 1-5.

12.
R. Isermann, J. Schaffnit and S. Sinsel (1999), "Hardware-in-the-loop simulation for the design and testing of engine-control systems", Control Engineering Practice, Vol. 7, pp. 643-653. crossref(new window)

13.
Q. R. Butt, A. I. Bhatti, M. R. Mufti, M. A. Rizvi and I. Awan (2013), "Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer", Simulation Modeling Practice and Theory, Vol. 32, pp. 138-154. crossref(new window)

14.
T. Park, C. Han and S. Lee (2005), "Development of the electronic control unit for the rack-actuating steer-by-wire using the hardware-in-the-loop simulation system," Mechatronics, Vol. 15, pp. 899-918. crossref(new window)

15.
A. Palladino, G. Fiengo and D. Lanzo (2012), "A portable hardware-in-the-loop (HIL) device for automotive diagnostic control systems," ISA Transactions, Vol. 51, pp. 229-236. crossref(new window)

16.
C. You and Y. Ko (2015), "Development of the Vehicle Diagnosis Program Using OBD-II", Transaction of KSAE, Vol. 23, No. 3, pp. 271-278. crossref(new window)

17.
N. Jeong, S. Yang, K. Kim, S. Choi, M. Wang, S. You, H. Kim and M. Suh (2015), "Development of Urban Driving Cycle for Performance Evaluation of Electric Vehicles Part II : Verification of Driving Cycle," Transaction of KSAE, Vol. w23, No. 2, pp. 161-168, 2015. crossref(new window)