JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Preparation and Characterization of PAN-based Carbon Fiber with Carbonization Temperature
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Textile Science and Engineering
  • Volume 53, Issue 2,  2016, pp.103-108
  • Publisher : The Korean Fiber Society
  • DOI : 10.12772/TSE.2016.53.103
 Title & Authors
Preparation and Characterization of PAN-based Carbon Fiber with Carbonization Temperature
Lee, Hyun Jae; Won, Jong Sung; Lim, Sung Chan; Lee, Tae Sang; Yoon, Jun Young; Lee, Seung Goo;
  PDF(new window)
 Abstract
In this study, PAN (polyacrylonitrile)-based carbon fiber was prepared under different carbonization conditions. Carbonization of oxi-PAN fiber was performed under four different temperature conditions. Changes in the characteristics of these carbon fibers prepared under each condition were studied using various analyses. Crystalline characteristics of carbon fiber such as crystallinity and crystal size were analyzed using X-ray diffraction (XRD) and Scherrer`s equation, based on the XRD patterns, respectively. The tensile strength and modulus of these carbon fibers were measured through a tensile test. Thermal characteristics were analyzed using a thermogravimetric analyzer (TGA). The result showed that the crystal size and crystallinity of the carbon fibers increased with carbonization temperature. Furthermore, both mechanical strength and thermal resistance were also observed to improve with carbonization temperature. Finally, a relationship between carbonization temperature, thermal properties, and mechanical properties of the carbon fibers was derived.
 Keywords
carbon fiber;PAN;polyacrylonitrile;carbonization;
 Language
Korean
 Cited by
 References
1.
O. P. Bahl and L. M. Manocha, “Characterization of Oxidized PAN Fibers”, Carbon, 1974, 12, 417-423. crossref(new window)

2.
A. D. Cato and D. D. Edie, “Flow Behavior of Mesophase Pitch”, Carbon, 2003, 41, 1411-1417. crossref(new window)

3.
L. L. Hong, A. Moshonov, and J. D. Muzzy, "Electrochemical Polymerization of Xylene Derivatives on Carbon Fiber", Polym. Compos., 1991, 12, 191-195. crossref(new window)

4.
L. T. Drzal and M. Madhukar, "Fibre-matrix Adhesion and Its Relationship to Composite Mechanical Properties", J. Mater. Sci., 1993, 28, 569-610. crossref(new window)

5.
M. S. Dresselhaus and G. Dresselhaus, "Intercalation Compounds of Graphite", Adv. Phys., 1981, 30, 139-326. crossref(new window)

6.
S. Chand, "Review Carbon Fibers for Composites", J. Mater. Sci., 2000, 35, 1303-1313. crossref(new window)

7.
Z. Wangxi, L. Jie, and W. Gang, “Evolution of Structure and Properties of PAN Precursors during Their Conversion to Carbon Fibers”, Carbon, 2013, 41, 2805-2812.

8.
E. Fitzer, W. Frohs, and M. Heine, “Optimization of Stabilization and Carbonization Treatment of PAN Fibers and Structural Characterization of the Resulting Carbon Fibers”, Carbon, 1986, 24, 387-395. crossref(new window)

9.
H. G. Chae, M. L. Minus, A. Rasheed, and S. Kumar, “Stabilization and Carbonization of Gel Spun Polyacrylonitrile/Single Wall Carbon Nanotube Composite Fibers”, Polymer, 2007, 48, 3781-3789. crossref(new window)

10.
E. Fizter and D. J. Muller, “The Influence of Oxygen on the Chemical Reactions during Stabilization of Pan as Carbon Fiber Precursor”, Carbon, 1975, 13, 63-69. crossref(new window)

11.
S. Lee, J. Kim, B. C. Ku, J. Kim, and H. I. Joh, "Structural Evolution of Polyacrylonitrile Fibers in Stabilization and Carbonization", Adv. Chem. Eng. Sci., 2012, 2, 275-282. crossref(new window)

12.
N. Yusof and A. F. Ismail, "Post Spinning and Pyrolysis Processes of Polyacrylonitrile (PAN)-based Carbon Fiber and Activated Carbon Fiber: A Review", J. Anal. Appl. Pyrol., 2012, 93, 1-13. crossref(new window)

13.
M. Wu, Q. Wang. Q, K. Li, Y. Wu, and H. Liu, "Optimization of Stabilization Conditions for Electrospun Polyacrylonitrile Nanofibers", Polym. Degrad. Stabil., 2012, 97, 1511-1519. crossref(new window)

14.
E. Frank, F. Hermanutz, and M. R. Buchmeiser, "Carbon Fibers: Precursors, Manufacturing, and Properties", Macromol. Mater. Eng., 2012, 297, 493-501. crossref(new window)

15.
C. D. Doyle, "Estimating Thermal Stability of Experimental Polymer by Empirical Thermogravimetric Analysis", Anal. Chem., 1961, 33, 77-79. crossref(new window)

16.
M. K. Ismail, "On the Reactivity, Structure, and Porosity of Carbon Fibers and Fabrics", Carbon, 1991, 29, 777-792. crossref(new window)

17.
P. Gao, H. Wang, and Z. Jin, "Study of Oxidation Properties and Decomposition Kinetics of Three-dimensional (3-D) Braided Carbon Fiber", Thermochimica Acta, 2004, 414, 59-63. crossref(new window)

18.
M. Jing, C. G. Wang, B. Zhu, Y. X. Wang, X. P. Gao, and W. N. Chen, "Effects of Preoxidation and Carbonization Technologies on Tensile Strength of PAN-based Carbon Fiber", J. Appl. Polym. Sci., 2008, 108, 1259-1264. crossref(new window)