Publisher : The Korean Society for Noise and Vibration Engineering
DOI : 10.5050/KSNVE.2016.26.3.270
Title & Authors
The Evolution of Electromechanical Admittance from Mode-converted Lamb Waves Reverberating on a Notched Beam Kim, Eun Jin; Park, Hyun Woo;
This paper investigates the evolution of EM admittance of piezoelectric transducers mounted on a notched beam from wave propagation perspective. A finite element analysis is adopted to obtain numerical solutions for Lamb waves reverberating on the notched beam. The mode-converted Lamb wave signals due to a notch are extracted by using the polarization characteristics of piezoelectric transducers collocated on the beam. Then, a series of temporal spectrums are computed to demonstrate the evolution of EM admittance through fast Fourier transform of the mode-converted Lamb wave signals which are consecutively truncated in the time domain. When truncation time is relatively small, the corresponding temporal spectrum is governed by the characteristics of the input driving frequency. As truncation time becomes large, however, the modal characteristics of the notched beam play a crucial role in the temporal spectrum within the input driving frequency band. This implies that mode-converted Lamb waves reverberating on the beam contributes to the resonance of the beam. The root mean square values are computed for the temporal spectrums in the vicinity of each resonance frequency. The root mean square values increase monotonically with respect to truncation time for any resonance frequencies. Finally the implications of the numerical observation are discussed in the context of damage detection of a beam.
Mode-converted Lamb Waves;Temporal Spectrum;Beam;Notch;Finite Element Analysis;Piezoelectric(PZT) Wafer;Truncation Time;Root Mean Square;Fast Fourier Transform;Wave Propagation Perspective;
Raghavan, A. and Cesnik, C. E. S., 2007, Review of Guided-wave Structural Health Monitoring, The Shock and Vibration Digest, Vol. 39, No. 91, pp. 91~114.
Park, G., Sohn, H., Farrar, C. R. and Inman, D. J., 2003, Overview of Piezoelectric Impedance-based Health Monitoring and Path Forward, The Shock and Vibration Digest, Vol. 35, No. 6, pp. 451~463.
Alleyne, D. N. and Cawley, P., 1992, TheInteraction of Lamb Waves with Defects. IEEE Transactions on Ultrasonic, Ferroelectrics and Frequency Control, Vol. 39, No. 3, pp. 381~387.
Cawley, P. and Alleyne, D., 1996, The Use of Lamb Wave for the Long Range Inspection of Large Structures, Ultrasonics, Vol. 34, No. 2, pp. 287~290.
Annamdas, V. G. M. and Soh, C. K., 2010, Application of Electromechanical Impedance Technique for Engineering Structures: Review and Future Issues, Journal of Intelligent Material Systems and Structures, Vol. 21, No. 1, pp. 41~59.
Kim, E. J., Sohn, H. and Park, H. W., 2009, Experimental Verification of Spectral Element Analysis for the High-frequency Responses of a Beam with a Surface Bonded Piezoelectric Transducer, Transaction of Korean Society of Noise and Vibration Engineering, Vol. 19, No. 12, pp. 1347~1355.
Giurgiutiu, V. and Zagrai, A., 2002, Embedded Self-sensing Piezoelectric Active Sensors for On-line Structural Identification, Journal of Vibration and Acoustics, Vol. 124, No. 1, pp. 116~125.
Park, S., Yun, C. B., Roh, Y. and Lee, J. J., 2006, PZT-based Active Damage Detection Techniques for Steel Bridge Components, Smart Materials Structures, Vol. 15, No. 4, pp. 957~966.
Thien, A. B., Chiamori, H. C., Ching, J. T., Wait, J. R. and Park, G., 2008, The Use of Macro-fiber Composites for Pipeline Structural Health Assessment. Structural Control and Health Monitoring, Vol. 15, No. 1, pp. 43~63.
An, Y. and Sohn, H., 2012, Integrated Impedance and Guided Wave Based Damage Detection, Mechanical Systems and Signal Processing, Vol. 28, pp. 50~62.
Park, H. W., 2014, Understanding the Electromechanical Admittance of Piezoelectric Transducers Collocated on a Finite Beam from the Perspective of Wave Propagation, Journal of Intelligent Material Systems and Structures, Vol. 25, No. 17, pp. 2122~2140.
Abaqus, [User's Manual, Version 6.7], HKS Inc., Providence, Rhode Island.
Kim, E. J., Kim, M. K., Sohn, H. and Park, H. W., 2011, Investigating Electro-mechanical Signals from Collocated Piezoelectric Wafers for the Reference-free Damage Diagnosis of a Plate, Smart Materials and Systems, Vol. 20, No. 6, pp. 065001.
Kim, S. B. and Sohn, H., 2007, Instantaneous Reference-free Crack Detection based on Polarization Characteristics of Piezoelectric Materials, Smart Materials and Structures, Vol. 16, No. 6, pp. 2375~2387.