Advanced SearchSearch Tips
Enhanced Electrochemical Reactivity at Electrolyte/electrode Interfaces of Solid Oxide Fuel Cells with Ag Grids
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Enhanced Electrochemical Reactivity at Electrolyte/electrode Interfaces of Solid Oxide Fuel Cells with Ag Grids
Choi, Mingi; Hwang, Sangyeon; Byun, Doyoung; Lee, Wonyoung;
  PDF(new window)
The specific role of current collectors was investigated at the electrolyte/electrode interface of solid oxide fuel cells (SOFCs). Ag grids were fabricated as current collectors using electrohydrodynamic (EHD) jet printing for precise control of the grid geometry. The Ag grids reduced both the ohmic and polarization resistances as the pitch of the Ag grids decreased from to . The effective electron distribution along the Ag grids improved the charge transport and transfer at the interface, extending the active reaction sites. Our results demonstrate the applicability of EHD jet printing to the fabrication of efficient current collectors for performance enhancement of SOFCs.
Solid oxide fuel cell;Electrolyte/electrode interface;Current collection;EHD jet printing;Ag grid;
 Cited by
E. D. Wachsman and K. T. Lee, "Lowering the Temperature of Solid Oxide Fuel Cells," Science, 334 [18] 935-39 (2011). crossref(new window)

J.-W. Son and H. S. Song, "Influence of Current Collector and Cathode Area Discrepancy on Performance Evaluation of Solid Oxide Fuel Cell with Thin-film-processed Cathode," Int. J. Precis. Eng. Manuf. -Green Techn., 1 [4] 313-16 (2014). crossref(new window)

H. S. Noh, J. Hwang, K. Yoon, B.-K. Kim, H.-W. Lee, J.-H. Lee, and J.-W. Son, "Optimization of Current Collection to Reduce the Lateral Conduction Loss of Thin-film-processed Cathodes," J. Power Sources, 230 109-14 (2013). crossref(new window)

M. Guillodo, P. Vernoux, and J. Fouletier, "Electrochemical Properties of Ni-YSZ Cermet in Solid Oxide Fuel Cells," Solid State Ion., 127 [1-2] 99-107 (2000). crossref(new window)

S. P. Jiang, J. G. Love, and L. Apateanu, "Effect of Contact Between Electrode and Current Collector on the Performance of Solid Oxide Fuel Cells," Solid State Ion., 160 [1-2] 15-26 (2003). crossref(new window)

A. Rolle, V. Thoreton, P. Rozier, E. Capoen, O. Mentre, B. Boukamp, and S. Daviero-Minaud, "Evidence of the Current Collector Effect: Study of the SOFC Cathode Material $Ca_3Co_4O_{9+{\delta}}$," Fuel Cells, 12 [2] 288-301 (2012). crossref(new window)

S. P. Simmer, M. D. Anderson, I. R. Pederson, and J. W. Stevenson, "Performance Variability of La(Sr)$FeO_3$ SOFC Cathode with Pt, Ag, and Au Current Collectors," J. Electrochem. Soc., 152 [9] 1851-59 (2005). crossref(new window)

M. Casarin and V.M. Sglavo, "Effect of the Current Collector on Performance of Anode-Supported Microtubular Solid Oxide Fuel Cells," J. Fuel Cell. Sci. Tech., 12 031005-1-6 (2015). crossref(new window)

S. H. Choi, C. S. Hwang, and M. H. Lee, "Performance Enhancement of Freestanding Micro-SOFCs with Ceramic Electrodes by the Insertion of a YSZ-Ag Interlayer," ECS Electrochem. Lett., 3 [9] 57-59 (2014). crossref(new window)

Y. Jang, J. Kim, and D. Byun, "Invisible Metal-grid Transparent Electrode Prepared by Electrohydrodynamic (EHD) Jet Printing," J. Phys. D. Appl. Phys., 46 155103-1-6 (2013). crossref(new window)

J. G. -Barriocanal, A. R. -Calzada, M. Varela, Z. Sefriouri, E. Iborra, C. Leon, S. J. Pennycook, and J. Santamaria, "Colossal Ionic Conductivity at interfaces of Epitaxial $ZrO_2:Y_2O_3/SrTiO_3$ Heterostructures," Science, 321 [1] 676-79 (2008). crossref(new window)

M. Koyama, C. -Ju. Wen, T. Masuyama, J. Otomo, H. Fukunaga, K. Yamada, K. Eguchi, and H. Takahashi, "The Mechanism of Porous $Sm_{0.5}Sr_{0.5}O_3$ Cathodes Used in Solid Oxide Fuel Cells," J. Electrochem. Soc., 148 [7] A795-801 (2001). crossref(new window)

P. Möller, R. Kanarbik. I. Kivi, and E. Lust, "Influence of Microstructure on the Electrochemical Behavior of LSC Cathodes for Intermediate Temperature SOFC," J. Electrochem. Soc., 160 [11] 1245-53(2013). crossref(new window)

S. Wang, T. Kato, S. Nagata, T. Honda, T. Kaneko, N. Iwashita, and M. Dokiya, "Performance of $La_{0.6}Sr_{0.4}Co_{0.8}Fe_{0.2}O_3-Ce_{0.8}Gd_{0.2}O_{1.9}-Ag $Cathode for Ceria Electrolyte SOFCs," Solid State Ion., 146 [3-4] 203-10 (2002). crossref(new window)

Y. K. Li, H. J. Choi, H. K. Kim, N. K. Chean, M. Kim, J. Koo, H. J. Jeong, D.Y. Jang, and J. H. Shim, "Nanoporous Silver Cathodes Surface-treated by Atomic Layer Deposition of $Y:ZrO_2$ for High-Performance Low-temperature Solid Oxide Fuel Cells," J. Power Sources, 295 175-81 (2015). crossref(new window)

L.-P. Sun, H. Zhao, Q. Li, L.-H. Huo, J.-P. Viricelle, and C. Pijolat, "Study of Oxygen Reduction Mechanism on Ag Modified $Sm_{1.8}Ce_{0.2}CuO_4$ Cathode for Solid Oxide Fuel Cell," Int. J. Hydrogen Energ., 38 [32] 14060-66 (2013). crossref(new window)

W. Zhou, R. Ran, Z. Shoa, R. Cai, W. Jin, N. Xu, and J. Ahn, "Electrochemical Performance of Silver-modified $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ Cathodes Prepared via Electroless Deposition," Electrochim Acta, 53 [13] 4370-80 (2008). crossref(new window)

K. T. Lee and A. Manthiram, "Electrochemical Performance of $Nd_{0.6}Sr_{0.4}Co_{0.5}Fe_{0.5}O_{3-{\delta}}-Ag$ Composite Cathodes in Intermediate Temperature Solid Oxide Fuel Cells," J. Power Sources, 160 [2] 903-8 (2006). crossref(new window)