Publisher : The Korean Society for Technology of Plasticity
DOI : 10.5228/KSTP.24.5.354
Title & Authors
Local Softening of Hot-stamped Parts using a Laser Heat Treatment Kim, K.B.; Jung, Y.I.; Kim, T.J.;
AHSS (Advanced High Strength Steels) has been increasingly employed by global automotive OEMs in order to satisfy strengthened regulations and reduce weight for fuel efficiency. Hot stamping using boron steels in AHSS increases not only formability but also strength. The typical hot-stamped automotive part is the center pillar that is critical for vehicle side impact. However, the hot-stamped part can be risky for the passenger safety caused by brittle fracture under a vehicle collision. The high power diode laser is suitable for the heat treatment giving AHSS increased elongation that prevents brittle fracture in car crash. Therefore, local softening by laser heat treatment for energy absorption area on the hot-stamped part improves crash-worthiness.
Hot Stamping;Laser Heat Treatment;Local Softening;Center Pillar;Vehicle Side Impact;