JOURNAL BROWSE
Search
Advanced SearchSearch Tips
3D Finite Element-based Study on Skin-pass Rolling - Part II : Development of the Model
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Transactions of Materials Processing
  • Volume 25, Issue 2,  2016, pp.136-140
  • Publisher : The Korean Society for Technology of Plasticity
  • DOI : 10.5228/KSTP.25.2.136
 Title & Authors
3D Finite Element-based Study on Skin-pass Rolling - Part II : Development of the Model
Yoon, S.J.; Hwang, S.M.;
  PDF(new window)
 Abstract
Although the finite element method is a good tool to analyze skin-pass rolling, it is hard to be applied in the field because of its long calculation time. In the current study, simple numerical models were developed for the prediction of roll force and residual stress profiles along the strip width. These models are based on finite element analysis and a coupled solution of Sims’ equation and Hitchcock’s formula. The results indicate that plastic strains can be represented as in simple equations of the deformed roll profile and the initial thickness of the strip.
 Keywords
Skin-pass Rolling;Residual Stress;Roll Force Profile;Plastic Deformation;3-D Finite Element Method;
 Language
Korean
 Cited by
 References
1.
N. A. Fleck, K. L. Johnson, 1987, Towards a New Theory of Cold Rolling Thin Foil, Int. J. Mech. Sci., Vol. 29, No. 7, pp. 507~524. crossref(new window)

2.
N. A. Fleck, K. L. Johnson, M. E. Mear, L. C. Zhang, 1992, Cold Rolling of Foil, Proc. Inst. Mech. Engr., Vol. 206, pp. 119~131. crossref(new window)

3.
H. R. Le, M. P. F. Sutcliffe, 2001, A Robust Model for Rolling of Thin Strip and Foil, Int. J. Mech. Sci., Vol. 43, No. 6, pp. 1405~1419. crossref(new window)

4.
T. A. M. Langlands, D. L. S. McElwain, S. A. Domanti, 2004, An Approximate Method for the Solution of an Influence Function Foil Rolling Model, Int. J. Mech. Sci., Vol. 46, No. 8, pp. 1139~1156. crossref(new window)

5.
H. Ford, 1948, Researches into the Deformation of Metals by Cold Rolling, Proc. Inst. Mech. Engr., Vol. 159, No. 1, pp. 115~143. crossref(new window)

6.
R. B. Sims, 1954, The Calculation of Roll Force and Torque in Hot Rolling Mills, Proc. Inst. Mech. Engr., Vol. 168, No. 1, pp. 191~200. crossref(new window)

7.
K. H. Yun, T. J. Shin, S. M. Hwang, 2007, A Finite Element-based On-line Model for the Prediction of Deformed Roll Profile in Flat Rolling, ISIJ Int., Vol. 47, No. 9, pp. 1300~1308. crossref(new window)