Advanced SearchSearch Tips
The Study on Effect of Emissions and Performance of a Conventional Vehicle using the High Concentration Alcohol Blended Petroleum Product
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Study on Effect of Emissions and Performance of a Conventional Vehicle using the High Concentration Alcohol Blended Petroleum Product
  PDF(new window)
As concern about energy security and global warming many countries have been making effort to reduce fossil fuel. In the case of US, as one of the efforts, the standards of the alcohol vehicle fuels(including blended with gasoline) have been established. Alcohol is known that make some trouble concerning startability, durability and corrosion when using as fuel of a conventional vehicle. For these reason, alcohol usage needs not only the fuel standard, but also a modified car. In the case of Korea, although there are no the standard and the modified vehicle yet, high concentration alcohol blended fuel has being sold at illegal market. In this study, exhaust gas and performance of the conventional vehicle that alcohol(methanol and isopropyl alcohol) blends were fueled were measured to notify danger of using them without preparation of institutional arrangements. Also, to analyze correlation characteristics of the fuels and them, property test of the fuels was conducted. The test result show that bad-startability caused by low RVP and high T10 affected increase in NMOG and CO. NOx was increased under the highest short term fuel trim caused by high Oxygen content and low NHV of alcohol. According to increasing as alcohol content, fuel economy and acceleration ability were decreased but was not significantly decreased.
Alcohol Fuel;Emission;Startabiltiy;Driveability;Fuel Economy;
 Cited by
K. Kelly, L. Eudy, and T. Coburn, 1999, "Light-Duty Alternative Fuel Vehicles: Federal Test Procedure Emissions Results", NREL Technical report, NREL/ TP-540-25818.

Atsushi Kameoka, Keiichi Nagai, Gen Sugiyama and Toshiyuki Seko, 2005, "Effect of Alcohol Fuels on Fuel-Line Materials of Gasoline Vehicles", SAE technical paper series 2005-01-3708.

K. I. Min, B. K. Na, E. S. Yim, C. S. Jung, and U. R. Lee, 2011, "Study of applicability of car parts on bio-ethanol blend(E85)", KSAE 2011 spring conference, pp. 417-423.

Henning Kleeberg FEV, Inc., 2012, "Intermediatelevel Ethanol Blends Engine Durability Study", CRC Project CM-136-09-1B.

E. S. Yim, K. I. Min, C. H. Jeon, D. M. Lee, J. R. Kim, S. S. Kim, E. J. Jang, C. K. Park, C. S. Jung, J. K. Kim, Y. K. Lim, and S. C. Shin, "Actual Assessment to Introduce Bio-ethanol Blended Fuel in Domestic", journal of Korean Society for New and Renewable Energy(KSNRE)/ Volume 3, No. 4, pp.98-103

Owen, K. and T Coley, 1995, "Automotive Fuels Reference Book(2nd Edition)", Society of Automotive Engineers.

Andy Stodart, Jim Maher, Lars Greger and Jan-Olof Carlsson, 1998, "Fuel System Development to Improve Cold Start Performance of a Flexible Fuel Vehicle" SAE technical paper series 985232.

Transportation Research Center Inc., 2009, "Mid-Level Ethanol Blends Catalyst Durability Study Screening", CRC Report: E-87-1.

Orbital Engine Company, 2003, "Market Barriers to the Uptake of Biofuels Study, A Testing Based Assessment to Determine Impacts of a 20% Ethanol Gasoline Fuel Blend on the Australian Passenger Vehicle Fleet Report to Environment Australia".

ACEA, Alliance, EMA and JAMA, 2013, "WORLDWIDE FUEL CHARTER(5th Ed.)".

Coordinating Research Council, INC., 2009, "Cold- Start and warmup E85 Cold Ambient Temperature Driveability program", CRC Report No. 654.

Sam Reddy, 2011, "Mathematical Prediction of Flammability of Ethanol-Containing Fuels", CRC Report No. 661.

C. Scott Sluder, Brian H. West, Aron D. Butler, William J. Ruona, and Arvon L. Mitcham, 2014, "Determination of the R Factor for Fuel Economy Calculations Using Ethanol-Blended Fuels over Two Test Cycles", SAE Int. J. Fuels Lubr. / Volume 7, Issue 2.