JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Heating and Cooling Load of Building according to Atrium Layout
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : KIEAE Journal
  • Volume 16, Issue 1,  2016, pp.29-36
  • Publisher : Korea Institute of Ecological Architecture and Environment
  • DOI : 10.12813/kieae.2016.16.1.029
 Title & Authors
Heating and Cooling Load of Building according to Atrium Layout
Jeong, Nam-Young; Lee, Ji-Young; Chae, Young Tae;
  PDF(new window)
 Abstract
Purpose: The purpose of this study is to present basic data which would be applied on the early stage of the architectural design. And that determines the introduction of the atrium by comparing and analysing the environmental performance of atrium building. Method: The building forms are classified into low storied building, middle storied building and high storied building. This study compares and analyses energy performance of the standard building without atrium and the atrium building which has one-side, two-side, three-side, four-side, and linear atrium by measuring of annual heating and cooling load with EnergyPlus. Result: As a result of the analysis of the relative annual heating and cooling load by building type, it is shown that the fluctuation of cooling load in low storied building is large because heat storage in atrium affects building, and the fluctuation of heating load in high storied building is large owing to the effect of external wall area of atrium which makes heat loss. Especially, it indicated the largest annual heating and cooling load in four-side atrium of low storied building, and in one-side atrium of high storied building.
 Keywords
Atrium;EnergyPlus;Heating and Cooling Load;
 Language
English
 Cited by
 References
1.
신철우, "부착형 아트리움의 실내 온도분포 및 냉난방 부하에 영향을 미치는 건축적 요소에 관한 연구", 수원대학교 석사학위논문, 1998 // (Sin, Chul-Woo, "A Study on the Design Parameters Having an Influence on Indoor Air Temperature Distribution and Cooling-Heating Loads of an Attached Atrium" Suwon University Master's Thesis, 1998)

2.
이지영, 이경선, "아트리움 공간의 친환경적 활용 사례연구", 대한건축학회논문집 계획계 제 26권 제 9호, 2010 // (Lee, Ji-Young, Lee, Kyung-Sun "Study on Examples of Sustainable Environment Application in Atrium Space" Review of architecture and building science, Vol.26, No. 9, 2010)

3.
이지영, 손장열, 이영균, "친환경적 아트리움을 위한 개구부계획", 대한건축학회논문집 계획계 제 26권 제 1호, 2010 // (Lee, Ji-Young Sohn, Jang-Yeul Lee, Young-Gyun, "Planning Conditions of Opening for Environment-friendly Atrium" Review of architecture and building science, Vol.26, No. 1, 2010)

4.
추승연, 이권형, 박선경, "Green BIM 가이드라인 개발을 위한 모델링 수준(Level of Development) 설정에 관한 연구, 에너지 성능평가를 중심으로", 대한건축학회 논문집 계획계 제 28권 제 6호, 2012 //(Choo, Seung-Yeo, Lee, Kweon-Hyoun, Park, Sun-Kyoung, "A Study on LOD(Level of Development) for Development of Green BIM Guidelines, Focused on Energy Performance Estimation" Review of architecture and building science, Vol.47, No. 10, 2012)

5.
정승우, 이권형, 김인한, 추승연, "Green BIM기반 초기설계 단계에서 타입별 아트리움의 규모산정에 관한 연구", 한국CAD//CAM학회논문집 제 18권 1호, 2013 // (Jeong, Seung-Woo, Lee, Kweon-Hyoung, Kim, In-Han, Choo, Seung-Yeon "Analysis on Green BIM based Atrium Sizes in the Early Design Stage" Transactions of the Society of CAD/CAM Engineers, Vol.18, No. 1, 2013)

6.
윤여범, 이광호, "연간 건물에너지 시뮬레이션 소프트웨어-EnergyPlus", 설비저널 제43권 제9호, 2014 // (Yoon, Yeo-Beom, Lee, Kwang Ho, "Annual Building Energy Simulation Software-EnergyPlus" The magazine of the Society of Air-conditioning and Refrigerating Engineers of Korea, Vol. 43, No. 9, 2014)

7.
최정민, "1면 부착형 아트리움의 하계 열환경 특성 사례 연구", 한국건축친환경설비학회 논문집 제 8권 제 5호, 2014 // (Choi, Jeong-Min, "A Case Study on the Characteristics of Summer Thermal Environment of Single-side attached Atrium" Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, Vol.8, No. 5, 2014)

8.
Abdelsalam Aldawoud, Ray Clark, "Comparative analysis of energy performance between courtyard and atrium in buildings" Energy and Buildings, Vol. 40, Issue 3, 2008

9.
Yiaun Pan, Yuming Li, Zhizhong Huang, Study on Energy Modeling Methods of Atrium Buildings, International IBPSA Building Simulation Conference, Building Simulation 2009, 2009

10.
Abdelsalam Aldawoud, "The influence of the atrium geometry on the building energy performance" Energy and Buildings, Vol. 57, February, 2013

11.
Ahmed Qadir Ahmed, Energy Performance of Courtyard and Atrium in Different Climates, Renewable Energy and Architecture, p1-14, 2013

12.
Diego Palma Rojas, "Atrium building design: key aspects to improve their thermal performance on the Mediterranean climate of Santiago de Chile" International journal of low carbon technologies, Vol. 9, No. 4, 2014

13.
E. Djunaedy, J.L.M. Hensen, M.G.L.C. Loomans, "External Coupling between CFD and Energy Simulation: Implementation and Validation" Renewable Energy, Vol. 63, 2014