Advanced SearchSearch Tips
A Comparative Experiment on Thermal Stress Failure of Vacuum Glazing applied in Curtain Wall at Spandrel area
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : KIEAE Journal
  • Volume 16, Issue 3,  2016, pp.121-128
  • Publisher : Korea Institute of Ecological Architecture and Environment
  • DOI : 10.12813/kieae.2016.16.3.121
 Title & Authors
A Comparative Experiment on Thermal Stress Failure of Vacuum Glazing applied in Curtain Wall at Spandrel area
Kim, Seung-Chul; Yoon, Jong-Ho; Shin, U-Cheol; Ahn, Jung-Hyuk;
  PDF(new window)
Purpose: The vacuum glazing should constantly retain the gap in vacuum state to maintain high thermal performance. To do so, pillars are used to prevent the glazing from clinging to each other by the atmospheric pressure and therefore surface of the vacuum glazing is consistently affected by residual stress. The vacuum glazing could be applied to curtain wall systems at spandrel area to fulfill a rigorous domestic standard on U-value of the external wall. However, this can lead to high glazing temperature increase by heat concentration at a back panel and finally thermal stress breakage. This study experimentally determined weakness of the vacuum glazing systems on the thermal stress breakage and investigated effect of the residual stress. Method: The experiment first built two scale-down mock-up facilities that replicate the spandrel area in curtain wall, and then installed single low-e glass and vacuum glazing respectively. The two mock-up facilities were exposed to outside to induce the thermal stress breakage. Result: The experiment showed that the temperature occurred the thermal stress breakage was for the single low-e glass and for the vacuum glazing respectively. The result also showed the vacuum glazing reached the critical point earlier than the single low-e glass, which means that the vacuum glazing has high potential to occur the thermal shock breakage. In addition, the small temperature difference between two glazing indicates that the residual stress scarcely affects breakage of the vacuum glazing.
Vacuum glazing;Spandrel;Thermal breakage;Thermal stress;
 Cited by
Energy Performance Assessment of a 2nd-Generation Vacuum Double Glazing Depending on Vacuum Layer Position and Building Type in South Korea, Energies, 2017, 10, 8, 1240  crossref(new windwow)
국토교통부, "선도형 제로에너지빌딩 조기 활성화 방안", 2014.

국토교통부고시 제2015-1108호, "건축물의 에너지절약 설계기준", 2015.

남중우, 원종서, and 이병석, "진공유리의 열파손에 관한 실험적 연구," 대한설비공학회 학술발표대회논문집, pp. 392-393, Jun. 2012. // Nam, Jung-Woo, Won, Jong-Seo, Lee, Byung-Seok, "An Experimental Strudy on the Thermal Breakage of Vacuum Insulation Glass", Conference Journal of SAREK, pp. 392-393, Jun. 2012.

박장우, 윤종호, and 김동수, "스팬드럴용 투명 BIPV 모듈 후면구성 변화에 따른 온도 및 연간 냉난방부하 평가 연구," 한국건축친환경설비학회 학술발표대회 논문집, pp. 195-200, Oct. 2012. // Park, Jang-Woo, Yoon, Jong-Ho, Kim, Dong-Su, "A study on Annual Energy consumption and temperature variation depending on back side configuration of spandrel-type transparent BIPV module in office building", Conference Journal of KIAEBS, pp. 195-200, Oct. 2012.

송수빈, 손범구, and 정승문, "진공유리의 단열 성능과 건물 에너지 절감 효과," 한국태양에너지학회 학술대회논문집, pp. 139-144, Nov. 2012. // Song, Su-Bin, Son, Beom-Goo, Jung, Seong-Mun, "Insulation Performance and Building Energy Saving Effect of Vacuum Insulation Glass", Conference Journal of KSES, pp. 139-144, Nov. 2012.

신재규, 황우진, and 최원기, "유리의 열깨짐 현상과 방지대책에 관한 연구," 대한설비공학회 학술발표대회논문집, pp. 1180-1184, Jul. 2011. // Shin, Jae-Gyu, Hwang Woo-Jin, Choi Won-Ki, "A Study on the Thermal Breakage Phenomenon of Glazing and the Preventive Measures", Conference Journal of SAREK, pp. 1180-1184, Jul. 2011.s

윤종호, 김승철, 임경업, and 오명환, "건물 외피에 적용된 복층창의 열팽창 파손에 대한 민감도 분석 연구," 한국생태환경건축학회 논문집, vol. 14, no. 6, pp. 93-97, Dec. 2014. // Yoon, Jong-Ho, Kim, Seung-Chul, Im, Kyung-Up, Oh, Myeong-Hwan, "The Sensitivity Analysis of Thermal Expansion Breakage of Multi-layer Glazing in Building Envelope", Journal of KIEAE, vol. 14, no. 6, pp. 93-97, Dec. 2014.

윤종호, 오명환, and 신우철, "커튼월 스팬드럴용 BIPV창호의 온도 및 열파괴 가능성 연구," 대한건축학회 논문집 - 계획계, vol. 28, no. 2, pp. 241-250, Feb. 2012. // Yoon, Jong-Ho, Oh, Myung-Hwan, Shin, U-Cheol, "A Study on the Glazing Surface Temperature and Thermal Shock of BIPV Window Applied to the Spandrel Area of Curtain Wall System in Office Building", Journal of JAIK, vol. 28, no. 2, pp. 241-250, Feb. 2012.

장철용, 김치훈, and 이나은, "초단열 진공창의 공동주택 건물에너지효율등급 적용 연구," 한국태양에너지학회 학술대회논문집, pp. 96-101, Nov. 2010. // Jang, Cheol-Yong, Kim, Chi-Hoon, Lee, Na-Eun, "A study on the Vacuum Glazing applied to the Building Energy Efficiency Rating of Apartment", Conference Journal of KSES, pp. 96-101, Nov. 2010.

조수, "패시브.제로에너지 하우스 실현을 위한 창호 기술," 건축, vol. 58, no. 3, pp. 21-25, Feb. 2014. // Cho, Soo, "Window Technologies for Realization of Passive & Zero Energy House", Journal of JAIK, vol. 58, no. 3, pp. 21-25, Feb. 2014.

조수, 서재상, 성욱주, 박정환, 임현묵, and 홍원화, "진공창호 융복합외피 시스템의 난방성능 분석," 대한설비공학회 학술발표대회논문집, pp. 192-197, Jun. 2010. // Cho, Soo, Seo, Jae-Sang, Sung, Uk-Joo, Park, Jung-Hwan, Lim, Hyun-Mook, Hong, Won-Hwa, "Heating Performance Analysis of Convergent System of Vacuum Window Envelopes", Conference Journal of SAREK, pp. 192-197, Jun. 2010.

A. C. Fischer-Cripps, R. E. Collins, G. M. Turner, and E. Bezzel, "Stresses and fracture probability in evacuated glazing," Building and Environment, vol. 30, no. 1, pp. 41-59, Jan. 1995. crossref(new window)

C. F. Wilson, T. M. Simko, and R. E. Collins, "HEAT CONDUCTION THROUGH THE SUPPORT PILLARS IN VACUUM GLAZING," Solar Energy, vol. 63, no. 6, pp. 393-406, Dec. 1998. crossref(new window)

J. Wang, P. C. Eames, J. F. Zhao, T. Hyde, and Y. Fang, "Stresses in vacuum glazing fabricated at low temperature," Solar Energy Materials and Solar Cells, vol. 91, no. 4, pp. 290-303, Feb. 2007. crossref(new window)

N. Ng, R. E. Collins, and L. So, "Thermal and optical evolution of gas in vacuum glazing," Materials Science and Engineering: B, vol. 119, no. 3, pp. 258-264, Jun. 2005.

R. E. Collins, A. C. Fischer-Cripps, and J.-Z. Tang, "Transparent evacuated insulation," Solar Energy, vol. 49, no. 5, pp. 333?350, Nov. 1992. crossref(new window)

Schittich, Glass Construction Manual, 2007

W.D.Kingery, Factors Affecting thermal Stress Resistance of Ceramic Materials, JACS. 1955