Title & Authors
Kwak, Moon Su; Moon, Yong Ho;

Abstract
This study proposed an estimation method of allowable wave height for loading and unloading of the ship considering ship motion that is affected by ship sizes, mooring conditions, wave periods and directions. The method was examined validity by comparison with wave field data at pier $\small{8^{th}}$ in Pohang new harbor. The wave field data obtained with wave height of 0.10~0.75m and wave period of 7~13s in ship sizes of 800~35,000ton when a downtimes have occurred. On the other hand, the results of allowable wave height for loading and unloading of the ship in this method have obtained with wave heights of 0.19~0.50m and wave periods of 8~12s for ship sizes of 5,000, 10,000 and 30,000ton. Thus this method well reproduced the field data respond to various a ship sizes and wave periods. And the results of this method tended to decrease in 16~62% when have considered long wave, and it is decreased in 0~46% when didn't consider long wave than design standards in case of the ship sizes of 5,000~30,000ton, wave period of 12s and wave angle of $\small{75^{\circ}C}$. The allowable wave heights for loading and unloading of the ship proposed by design standards are didn't respond to various the ship sizes and wave periods, and we have found that the design standards has overestimated on smaller than 10,000ton.
Keywords
Language
Korean
Cited by
1.
A Study to Improve the Operation Criteria by Size of Ship in Ulsan Tank Terminal, Journal of the Korean Society of Marine Environment and Safety, 2016, 22, 6, 639
References
1.
Ann, S. P. (1986). Analysis of moored ship motion using three dimensional source distribution method, Master's Thesis, Seoul National University, Seoul Korea (in Korean).

2.
Ann, S. P. and Rhee, K. P. (1987). "The hydrodynamic interaction effects between two barges on the motion responses." Journal of the Society of Naval Architects of Korea, Vol. 24, No. 1, pp. 29-34 (in Korean).

3.
Bruun, P. (1981). Port engineering, 3rd Edition, Gulf Pub.

4.
Cho, I. H. and Choi, H. S. (1992). "Wave responses and ship motions in a harbor excited by long waves (I)." Transactions of the Society of Naval Architects of Korea, Vol. 29, No. 2, pp. 38-47.

5.
Cho, I. H. and Choi, H. S. (1993). "Wave responses and ship motions in a harbor excited by long waves (II)." Transactions of the Society of Naval Architects of Korea, Vol. 30, No. 1, pp. 87-93.

6.
Cho, I. S., Kong, K. Y. and Lee, Y. S. (2006). "A time domain analysis of moored ship motions considering tsunami resonant effects." Proceedings of the Spring Conference on Korean Institute of Navigation and Port Research, Korean Institute of Navigation and Port Research, Vol. 30, No. 1, pp. 191-197 (in Korean).

7.
Demirbilek, Z. and Panchang, V. (1998). CGWAVE : A Coastal Surface Water Wave Model of the Mild Slope Equation, Technical Report CHL-98-xx, U.S. Army Corps of Engineers, pp. 6-11.

8.
Jeong, W. M., Ryu, K. H., Beak, W. D. and Choi, H. J. (2011). "Downtime analysis for pohang new harbor through long-term investigation of waves and winds." Journal of Korean Society of Coastal and Ocean Engineers, Vol. 23, No. 3, pp. 226-235 (in Korean).

9.
Kubo, M., Saitou, K. and Sakakibara, S. (1988). "Application of a strip method to the hull motion of a quay-front moored vessels." Proceedings of the 35th Japanese Conference on Coastal Engineering, Japan Society of Civil Engineers, Vol. 35, pp. 682-686 (in Japanese).

10.
Kubo, M., Saito, K. and Oki, T. (1993). "Approximate calculation of ship motions under the prevention system of ship separation from quay wall." Journal of Japan Institute of Navigation, Vol. 89, pp. 15-21 (in Japanese).

11.
Kubo, M. and Sakakibara, S. (1995). "Effects of long period waves caused by wave groups and harbor oscillation in computation of wharf operation efficiency." Proceedings of Coastal Engineering, Japan Society of Civil Engineers, Vol. 42, pp. 931-935 (in Japanese).

12.
Kwak, M., Chung, J., Ann, S. and Pyun, C. (2006). "Estimation of harbor operating ratio based on moored ship motion." Journal of The Korean Society of Civil Engineers, Vol. 26, No. 6B, pp. 651-660 (in Korean).

13.
Kwak, M. S., Moon, Y. H. and Pyun, C. K. (2013). "A study on analysis of moored ship motion considering harbor resonance." Journal of the Korean Society of Civil Engineers, Vol. 33, No. 2, pp. 595-608 (in Korean).

14.
Mollen, W., Ligteringen, H., Lem, J. C. vander, Waal, J. C. M. de (2003). "Behavior of a moored LNG ship in swell waves." Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, Vol. 129, No. 1, pp. 15-21.

15.
Pohang Regional Maritime Affairs and Port Office (2010). Field investigation report for swell analysis and improvement measure making of downtime in Pohang new harbor, Report of Pohang Regional Maritime Affairs and Port Office (in Korean).

16.
Rafael, G., Eduardo, G., Fernando, P. (1998). "Utilization of moored vessels in hydraulic models of harbors." Coastal Engineering, ASCE, pp. 2979-2990.

17.
Sakakibara, S., Saitou, K. and Kubo, M. (2001). "A study on long-period ship motions in a harbor induced by a resonant large roll motion under long-period waves." Proceedings of ISOPE, The International Society of Offshore and Polar Engineers, Stavanger Norway, pp. 326-333.

18.
Ueda, S. and Shiraisi, S. (1988). The allowable ship motions for cargo handling at wharves, Technical Report of Port and Harbour Research Institute, Japan, Vol. 27, No. 4, pp. 3-61 (in Japanese).

19.
Ueda, S., Shiraisi, S., Oshima, H. and Asano, K. (1994). "Proposal of allowable wave height and wharf operation efficiency based on the oscillations of ships moored to quay walls." Proceedings of Coastal Engineering, Japan Society of Civil Engineers, Vol. 41, pp. 916-920 (in Japanese).

20.
Yeun, A. F., Burke, M. G. and Leung, T. C. (1986). "Ship motion study for the 2010 and 2020 plan in the san pedro bay california." Coastal Engineering, ASCE, pp. 2742-2755.