JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Stress field interference of hydraulic fractures in layered formation
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Geomechanics and Engineering
  • Volume 9, Issue 5,  2015, pp.645-667
  • Publisher : Techno-Press
  • DOI : 10.12989/gae.2015.9.5.645
 Title & Authors
Stress field interference of hydraulic fractures in layered formation
Zhu, Haiyan; Zhang, Xudong; Guo, Jianchun; Xu, Yaqin; Chen, Li; Yuan, Shuhang; Wang, Yonghui; Huang, Jingya;
 Abstract
Single treatment and staged treatments in vertical wells are widely applied in sandstone and mudstone thin interbedded (SMTI) reservoir to stimulate the reservoir. The keys and difficulties of stimulating this category of formations are to avoid hydraulic fracture propagating through the interface between shale and sand as well as control the fracture height. In this paper, the cohesive zone method was utilized to build the 3-dimensional fracture dynamic propagation model in shale and sand interbedded formation based on the cohesive damage element. Staged treatments and single treatment were simulated by single fracture propagation model and double fractures propagation model respectively. Study on the changes of fracture vicinity stress field during propagation is to compare and analyze the parameters which influence the interfacial induced stresses between two different fracturing methods. As a result, we can prejudge how difficult it is that the fracture propagates along its height direction. The induced stress increases as the pumping rate increasing and it changes as a parabolic function of the fluid viscosity. The optimized pump rate is and fluid viscosity is to avoid the over extending of hydraulic fracture in height direction. The simulation outcomes were applied in the field to optimize the treatment parameters and the staged treatments was suggested to get a better production than single treatment.
 Keywords
multilayer stress interference;sandstone and mudstone interbedded reservoir;CZM;induced stress;fracture height control;
 Language
English
 Cited by
1.
Multilayer stress field interference in sandstone and mudstone thin interbed reservoir, Journal of Geophysics and Engineering, 2016, 13, 5, 775  crossref(new windwow)
 References
1.
Anderson, G.D. (1981), "Effects of friction on hydraulic fracture growth near unbonded interfaces in rocks", Soc. Petrol. Eng. J., 21(1), 21-29. crossref(new window)

2.
Chen, Z.X., Chen, M., Jin, Y. and Huang, R.Z. (1997), "Determination of rock fracture toughness and its relationship with acoustic velocity", Int. J. Rock Mech. Min. Sci., 34(3), 49.e1-e11. crossref(new window)

3.
Chen, Z., Bunger, A.P., Zhang, X. and Jeffrey, R.G. (2009), "Cohesive zone finite element-based modeling of hydraulic fractures", Acta Mechanica Solida Sinica, 22(5), 443-452. crossref(new window)

4.
Chen, W.Z., Wu, G.J. and Jia, S. (2010), The Application of ABAQUS in Tunnel and Underground Engineering, China Waterpower Press.

5.
Cheng, Y. (2009), Boundary Element Analysis of the Stress Distribution Around Multiple Fractures: Implications for the Spacing of Perforation Clusters of Hydraulically Fractured Horizontal Wells, Society of Petroleum Engineers.

6.
Gu, H. and Weng, X. (2010), "Criterion for fractures crossing frictional interfaces at non-orthogonal angles", Proceedings of the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, American Rock Mechanics Association.

7.
He, M. and Hutchinson, J.W. (1989), "Kinking of a crack out of an interface", J. Appl. Mech., 56(2), 270-278. crossref(new window)

8.
Olson, J.E. and Wu, K. (2012), Sequential vs. Simultaneous Multizone Fracturing in Horizontal Wells: Insights From a Non-Planar, Multifrac Numerical Model, Society of Petroleum Engineers.

9.
Palmer, I.D. (1993), "Induced stresses due to propped hydraulic fracture in coalbed methane wells", Low Permeability Reservoirs Symposium, Denver, CO, USA, April.

10.
Renshaw, C.E. and Pollard, D.D. (1995), "An experimentally verified criterion for propagation across unbounded frictional interfaces in brittle, linear elastic materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstracts, 32(3), 237-249. crossref(new window)

11.
Saberhosseini, S.E., Keshavarzi, R. and Ahangari, K. (2014), "A new geomechanical approach to investigate the role of in-situ stresses and pore pressure on hydraulic fracture pressure profile in vertical and horizontal oil wells", Geomech. Eng., Int. J., 7(3), 233-246. crossref(new window)

12.
Shin, D.H. and Sharma, M.M. (2014), "Factors controlling the simultaneous propagation of multiple competing fractures in a horizontal well", SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX, USA, Feburary.

13.
Sneddon, I. (1946), "The distribution of stress in the neighbourhood of a crack in an elastic solid", Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 187(1009), 229-260. crossref(new window)

14.
Sneddon, I.N. and Elliot, H.A. (1946), "The opening of a Griffith crack under internal pressure", Quart. Appl. Math, 4(3), 262-267.

15.
Soliman, M.Y., East, L.E. and Augustine, J.R. (2010), "Fracturing design aimed at enhancing fracture complexity", SPE EUROPEC/EAGE Annual Conference and Exhibition, Barcelona, Spain, June.

16.
Warpinski, N.R. and Branagan, P.T. (1989), "Altered-stress fracturing", J. Petrol. Technol., 41(9), 990-997. crossref(new window)

17.
Warpinski, N.R. and Teufel, L.W. (1987), "Influence of geologic discontinuities on hydraulic fracture propagation (includes associated papers 17011 and 17074)", J. Petrol. Technol., 39(2), 209-220. crossref(new window)

18.
Wu, H. and Chudnovsky, A., Dudley, J.W. and Wong, G.K. (2004), "A map of fracture behavior in the vicinity of an interface", Gulf Rocks 2004 the 6th North America Rock Mechanics Symposium (NARMS), Houston, TX, USA, June.

19.
Yao, Y., Gosavi, S.V., Searles, K.H. and Ellison, T.K. (2010), "Cohesive fracture mechanics based analysis to model ductile rock fracture", Proceedings of the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, UT, USA, June.

20.
Zhu, H.Y., Deng, J.G., Chen, Z.J., An, F.C., Liu, S.J., Peng, C.Y., Wen, M. and Dong, G. (2013), "Perforation optimization of hydraulic fracturing of oil and gas well", Geomech. Eng., Int. J., 5(5), 463-483. crossref(new window)

21.
Zhu, H.Y., Deng, J.G., Zhao, J., Zhao, H., Liu, H.L. and Wang, T. (2014a), "Cementing failure of the casing-cement-rock interfaces during hydraulic fracturing", Comput. Concrete, Int. J., 14(1), 91-107. crossref(new window)

22.
Zhu, H.Y., Deng, J.G., Liu, S.J., Wen, M., Peng, C.Y., Li, J.R., Chen, Z.J., Hu, L.B., Lin, H. and Dong, G. (2014b), "Hydraulic fracturing experiments of highly deviated well with oriented perforation technique", Geomech. Eng., Int. J., 6(2), 153-172. crossref(new window)