Advanced SearchSearch Tips
Structural response analysis in time and frequency domain considering both ductility and strain rate effects under uniform and multiple-support earthquake excitations
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Earthquakes and Structures
  • Volume 10, Issue 5,  2016, pp.989-1012
  • Publisher : Techno-Press
  • DOI : 10.12989/eas.2016.10.5.989
 Title & Authors
Structural response analysis in time and frequency domain considering both ductility and strain rate effects under uniform and multiple-support earthquake excitations
Liu, Guohuan; Lian, Jijian; Liang, Chao; Zhao, Mi;
The structural dynamic behavior and yield strength considering both ductility and strain rate effects are analyzed in this article. For the single-degree-of-freedom (SDOF) system, the relationship between the relative velocity and the strain rate response is deduced and the strain rate spectrum is presented. The ductility factor can be incorporated into the strain rate spectrum conveniently based on the constant-ductility velocity response spectrum. With the application of strain rate spectrum, it is convenient to consider the ductility and strain rate effects in engineering practice. The modal combination method, i.e., square root of the sum of the squares (SRSS) method, is employed to calculate the maximum strain rate of the elastoplastic multiple-degree-of-freedom (MDOF) system under uniform excitation. Considering the spatially varying ground motions, a new response spectrum method is developed by incorporating the ductility factor and strain rate into the conventional response spectrum method. In order to further analyze the effects of strain rate and ductility on structural dynamic behavior and yield strength, the cantilever beam (one-dimensional) and the triangular element (two-dimensional) are taken as numerical examples to calculate their seismic responses in time domain. Numerical results show that the permanent displacements with and without considering the strain rate effect are significantly different from each other. It is not only necessary in theory but also significant in engineering practice to take the ductility and strain rate effects into consideration.
strain rate effect;ductility effect;multiple-support earthquake excitations;strain rate spectrum;response spectrum method;
 Cited by
Alzubaidi, R. and Lafta, S.H. (2013), "Effect of strain rate on the strength characteristics of soil-lime mixture", Geotech. Geol. Eng., 31(4), 1317-1327. crossref(new window)

Carlson, C.P., Zekkos, D. and Mccormick, J.P. (2014), "Impact of time and frequency Domain ground motion modification on the Response of a SDOF system", Earthq. Struct., 7(6), 1283-1301. crossref(new window)

Cervera, M., Oliver, J. and Manzoli, O. (1996), "A rate-dependent isotropic damage model for theseismic analysis of concrete dams", Earthq. Eng. Struct. Dyn., 25(9), 987-1010. crossref(new window)

Chopra, A.K. (2001), Dynamics of Structures: Theory and Applications to Earthquake Engineering, 2nd, Prentice Hall, Englewood Cliffs, New Jersey, USA.

Chopra, A.K. and Chintanapakdee, C. (2004), "Inelastic deformation rates for design and evaluation of structures: single-degree-of-freedom bilinear systems", J. Struct. Eng., 130(9), 1310-1319.

Clough, R.W. (1962), "Earthquake analysis by response spectrum superposition", Bull. Seismol. Soc. Amer., 52(3), 693-697.

Clough, R.W. and Penzien, J. (1993), Dynamics of Structures. 2nd, McGraw-Hill, USA.

COMITE EURO-INTERNATIONAL DU BETON. (1990), CEBFIP model code 1990, Redwood Books, Trowbridge, Wiltshire, Great Britain.

Guo, W., Yu, Z.W., Liu, G.H. and Guo, Z. (2013), "Possible existing seismic analysis errors of long span structures and bridges while utilizing multi-point earthquake calculation models", Bull. Earthq. Eng., 11(5), 1683-1710. crossref(new window)

Hao, H. (1991), "Response of multiply-supported rigid plate to spatially correlated seismic excitations", Earthq. Eng. Struct. Dyn., 20(9), 821-838. crossref(new window)

Hao, H. and Xiao, N.D. (1996), "Multiple excitation effects on response of symmetric buildings", Eng. Struct., 18(9), 732-740. crossref(new window)

Huh, H., Lin, J.H. and Park, S.H. (2009), "High speed tensile test of steel sheets for the stress-strain curve at the intermediate strain rate", Int. J. Auto. Technol., 10(2), 195-204. crossref(new window)

International Code Council (2003), International Building Code (IBC), Falls Church, Virginia, USA.

International Conference of building Officials (1997), Uniform Building Code (UBC), Whittier, California, USA.

Kiureghian, A.D. and Neumnhofer, A. (1992), "Response spectrum method for multiple-support seismic excitations", Earthq. Eng. Struct. Dyn., 21(8), 713-740. crossref(new window)

Li, G. and Larry, A. Fahnestock (2013), "Seismic response of single-degree-of-freedom systems representing low-ductility steel concentrically-braced frames with reserve capacity", J. Struct. Eng., 139(2), 199-211. crossref(new window)

Li, M. and Li, H.N. (2010), "Dynamic test and constitutive model for reinforcing steel", China Civ. Eng. J., 43(4), 70-75. (in Chinese)

Li, M. and Li, H.N. (2012), "Effects of strain rate on reinforced concrete structure under seismic loading", Adv. Struct. Eng., 15(3), 461. crossref(new window)

Medina, R.A. and Krawinkler, H. (2005), "Strength demand issues relevant for the seismic design of moment-resisting frames", Earthq. Spectra, 21(2), 415-439. crossref(new window)

Shing, P.S.B. and Mahin, S.A. (1988), "Rate-of-Loading Effects on Pseudodynamic Tests", J. Struct. Eng., 114(11), 2403-2420. crossref(new window)

Singh, M.P. and Mehta, K.B. (1983), "Seismic design response by an alternative SRSS rule", Earthq. Eng. Struct. Dyn., 11(6), 771-783. crossref(new window)

Sinha, R. and Igusa, T. (1995), "CQC and SRSS methods for non-classically damped structures", Earthq. Eng. Struct. Dyn., 24(4), 615-619. crossref(new window)

Su, L. and Shi, J.T. (2013), "Displacement-based earthquake loss assessment methodology for RC frames infilled with masonry panels", Eng. Struct., 48, 430-441. crossref(new window)

Su, L., Dong, S.L. and Kato, S. (2006), "A new average response spectrum method for linear response analysis of structures to spatial earthquake ground motions", Eng. Struct., 28(13), 1835-1842. crossref(new window)

Tian, L. and Li, H.N. (2010), "Seismic response of power transmission tower-line system subjected to spatially varying ground motions", Math. Prob. Eng., 2010, 587317.

Tian, L., Ma, R.S., Li, H.N. and Zhang, P. (2014), "Seismic response of straight line type and broken line type transmission lines subjected to non-uniform seismic excitations", Adv. Steel Constr., 10(1), 85-98.

Wang, W.M., Li, H.N. and Tian, L. (2013), "Progressive collapse analysis of transmission tower-line system under earthquake", Adv. Steel Constr., 9(2), 161-172.

Xu, Z.D. (2010), "Review for dynamic researches in civil engineering in recent years", Sci, China Technol. Sci., 53(5), 1450-1452.

Yu, R.F. and Zhou, X.Y. (2008), "Response spectrum analysis for non-classically damped linear system with multiple-support excitations", Bull. Earthq. Eng., 6(2), 261-284. crossref(new window)

Zhai, C.H. and Xie, L.L. (2007), "Progress on strength reduction factors in structural seismic design", J. Harbin Inst. Tech., 39(8), 1177-1184. (in Chinese)